蒸汽分配器v21.9

冷凝液收集器v21.9 / K

緊湊的冷凝液收集器與集成的波紋管

密封截止閥由1.0619 / WCB或1.0460 / A105

分別與法蘭和對焊;冷凝

收集器也配備了一個沉浸管,以避免

水錘。

使用:

冷凝的蒸汽加熱系統以及整合

管道工程。替代傳統的流形

單個組件之前必須編造

更大的成本。

操作:

整體緊湊的身體有4、8和12連接

橫向定位以使它更加緊湊。

模塊的生產繁殖4連接

和可以擴展到4的倍數,焊接

旁邊的模塊。整個模塊

建筑可以通過螺紋螺栓現場

洞坐落在流形。在冷凝

收集器,排放冷凝液流穿過

冷凝排水(管)焊接在管匯,和

形成一個內部管浸的水床。

從而防止水錘。積累

通過浸漬管冷凝排放向上。

steam distributor v21.9
Condensate collector v21.9/K
Compact condensate collector with integrated bellows 
sealed globe valves made of 1.0619/WCB or 1.0460/A105 
respectively with flanges or butt weld ends; the condensate 
collector is also equipped with an immersion tube to avoid 
water hammer.
use:
Steam heating systems as well as consolidation of condensate 
pipework. Replacement of conventional manifolds whose 
individual components previously had to be fabricated at 
greater cost.
operation:
One-piece compact body with 4, 8 or 12 connections 
positioned sideways in order to make it even more compact. 
The manifolds are produced in modules of 4 connections 
and can be extended to multiples of 4, by welding 
the modules next to each other. This whole modular 
construction can be bolted on site by means of threaded 
holes situated under the manifolds. In the condensate 
collector, the discharged condensate flows down through 
a condensate drain (pipe) welded inside the manifold, and 
forms a water bed in which the internal pipe is immersed. 
Water hammer is thereby prevented. The accumulated 
condensate is discharged upwards via the immersion tube.

advantages:
n Reduced planning expenses due to 
standard components
n Simplified procurement of compact 
units
n Low weight and small space requirements
n Costs saving due to lower insulation 
requirements
n Safe operation, maintenance- free 
bellows sealed valves
n Supplied ready for fitting, tested, 
mounted and painted