WIKA 990.60 NEUMO BioControl 衛(wèi)生型連接

                                   衛(wèi)生型隔膜耐震壓力表

                    Diaphragm seal with sterile connection
                               For sanitary applications
                Model 990.60, NEUMO BioControl® connection

                            Diaphragm seal with sterile connection, model 990.60

        Applications
         ■ Pharmaceutical and biotechnology industries
         ■ Production of active ingredients

       Special features
        ■ Dead space free
        ■ Hygienic design
        ■ Materials and surface finish qualities in accordance with pharmaceutical industry directives and standards
        ■ 3-A compliant

        Description
        Diaphragm seals are used to protect the pressure measuring instrument from aggressive, adhesive, crystallising, corrosive, highly viscous, environmentally hazardous or toxic media.
A diaphragm made of the appropriate material provides for the separation from the medium to be measured. Thus even the most difficult measuring requirements can be met by combining measuring instruments with diaphragm seals.
        A fluid inside the system, which can be chosen to suit the particular application, hydraulically transmits the pressure to the measuring instrument.
        Almost limitless application possibilities exist due to the large number of available variants, such as diaphragm seal designs or materials. The type of process connection （flange, threaded and sterile connection） and the basic method of manufacture are important design differentiation criteria.
        For further technical information on diaphragm seals and
diaphragm seal systems see IN 00.06 "Application, operating
principle, designs".

       The model 990.60 diaphragm seal with NEUMO BioControl® connection is particularly suited for use in sterile processes and is adapted to the process via the NEUMO BioControl® housing. This enables a hygienic integration of measuring instruments into pipelines or, by means of block flanges, into
tanks or fermenters.
       The diaphragm seal systems can withstand the cleaning vapour temperatures occurring in the SIP processes and thus ensure a sterile connection between the medium to be
measured and the diaphragm seal.
       Assembly of the diaphragm seal and measuring instrument is made via a direct assembly as standard or optionally via a cooling element or a flexible capillary.
       For the material selection WIKA offers a variety of solutions,in which the upper body and the diaphragm are made of identical materials. Stainless steel 316L （1.4435） is used as
standard material, other special materials are available on request.
       Measuring systems with model 990.60 WIKA diaphragm seals are successfully used in the life science industry, in pharmaceutical and biotechnology applications.

      Standard version
      Type of process connection
       NEUMO BioControl® connection for installation into  model 910.60 NEUMO BioControl® system, see data
sheet AC 09.14
       ■ Size 25 （mounting diameter 30.5 mm）
       ■ Size 50 （mounting diameter 50.0 mm）
       ■ Size 65 （mounting diameter 68.0 mm）
       ■ Size 80 （mounting diameter 87.5 mm）

      Nominal pressure
       PN 16 for size 50 ... 80
       PN 25 for size 25

      Measuring ranges
       0 ... 0.25 bar to 0 ... 16 bar for size 50 ... 80
       0 ... 25 bar for size 25
       （also vacuum and +/- measuring ranges）

      Material of upper body
       Stainless steel 1.4435 （316 L）

      Material of wetted parts
       Diaphragm: Stainless steel 1.4435 （316L）

      Surface roughness of wetted parts
       Ra ≤ 0.76 μm per ASME BPE SF3 （except for weld seam）

       Level of cleanliness of wetted parts
       Oil and grease free per ASTM G93-03 level E （WIKA standard） and ISO 15001 （<550 mg/m2）

      Connection to the measuring instrument
       Axial weld-in connection
 

      Options
      Process connection
      ■ Surface roughness of wetted parts Ra ≤ 0.38 μm per ASME BPE SF4, only with electropolished
surface （except for weld seam）
      ■ Sealing from EPDM or FEP with FPM core
      ■ Connection to the measuring instrument G 1/2, G 1/4, 1/2 NPT or 1/4 NPT （female）
      ■ Origin of wetted parts （EU, CH, USA）
      ■ Marking of the diaphragm seal with 3-A standard 74-05