PLC 工控機 嵌入式系統 人機界面 工業以太網 現場總線 變頻器 機器視覺 DCS PAC/PLMC SCADA 工業軟件 ICS信息安全 應用方案 無線通訊
深圳市昂為電子有限公司
參 考 價 | 面議 |
產品型號
品 牌
廠商性質其他
所 在 地深圳市
聯系方式:銷售部查看聯系方式
更新時間:2024-06-05 11:25:25瀏覽次數:297次
聯系我時,請告知來自 智能制造網暫無信息 |
氧氣含量指數在很多工業領域應用中屬于非常重要的參數,是研發以及生產的控制與過程中經常需要分析與監測。測量量程從0-10ppm到0-99%VolO2,可根據不同應用需求選擇不同測量原理的儀器和配置。
Measuring principle | ZrO2 sensor with Pt-electrodes
|
Measuring range | 0-25%Vol |
Analogue signal port | 0 … 10 V, 0 (4) …20mA, galvanically separated
|
Reproducability | +/- 2 % of the measuring value
|
Resolution
| 0,01 % – C(O2) |
T90-Time
| ca. 20 seconds |
Display | 2* 16 digit, illuminated LCD display 1. Line: display of concentration in Vol % 2. Line: messages, device status, sensor parameters |
Messages | 1 System message (measuring value yes / no) max. 2 messages configurable as measuring values |
Digital communication | serial interface RS232 |
ambient operating temp.
| +5 °C up to + 45 °C |
Power supply
| 110 or 230 VAC / 60 - 50 Hz |
Protection / Housing / Dimensions | IP 65/ wall mounting housing 300x320 x130mm IP20 / electronics unit 28 TE / 3HU IP54 / portable housing 42 TE / 3 HE IP 54 / panel mounting 144 x 144 mm
|
Weight
| 2.5-10 kg |
Options
| auto-calibration back purge for high dust concentrations pressure reducer particle lfilter 2-7μm manual 5 way valve electronical/pneumatic gas supply pump electronical flowmeter software for remote control and service
|
Approvals TÜV certification 936/807023/A of 14.08.2000
Version: AMS 3220 E V-2013-07
Specification subject to change.
The Measuring principle:
The Zircondioxid sensor is the ideal detector for the measurement of Oxygen in gases without
combustible impurities. The Zircondioxid sensor can be installed in the housing of the Oxygen
Analyser AMS 3220 . Using a calibration adapter with the Zircondioxid sensor, the Zircondioxid sensor can also be installed directly in a process gas pipe. This setup allows easy supply of calibration and reference gas to the sensor by using a separate pneumatic unit. In combination with the optional, time controlled auto-calibration feature the already high accuracy and reproducibility of the Oxygen Analyser AMS 3220 is improved further.
The Measuring system:
A long list of options allows to adapt the Oxygen Analyser AMS 3220 for almost every application.
Four measuring ranges with automatic switch-over and digital measuring range recognition can be set freely within the maximum measuring range. The software for remote control and remote service with access via the customer computer network further increase the flexibility of the Oxygen Analyser AMS 3220 in a application.
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
智能制造網 設計制作,未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
請輸入你感興趣的產品
請簡單描述您的需求
請選擇省份
聯系方式
深圳市昂為電子有限公司