PLC 工控機 嵌入式系統 人機界面 工業以太網 現場總線 變頻器 機器視覺 DCS PAC/PLMC SCADA 工業軟件 ICS信息安全 應用方案 無線通訊
思佳科技(北京)有限責任公司
參 考 價 | 面議 |
產品型號
品 牌
廠商性質其他
所 在 地
聯系方式:陳先生 查看聯系方式
更新時間:2021-10-13 18:01:42瀏覽次數:416次
聯系我時,請告知來自 智能制造網DescriptionThe100BASE-T1SFPModuleistheoptimumsolutiontoconvertbetween100BASE-T1andSGMII
Description
The 100BASE-T1 SFP Module is the optimum solution to convert between 100BASE-T1 and SGMII. It ?ts into a standard Small Form-factor Pluggable (SFP) and generates 100 Mbit/s full-duplex 100BASE-T1.
100BASE-T1 SFP模塊是在100BASE-T1和SGMII之間進行轉換的解決方案。采用標準的小型可插拔(SFP),可生成100 Mbit/s全雙工100BASE-T1。
It configures itself to Automotive 100BASE-T1 after power up. Master/slave mode of operation can be set with the DIP switch.
它在上電后配置為車載100BASE-T1??梢允褂肈IP開關設置主/從操作模式。
Registers of the integrated Transceiver are accessible via I2C interface for diagnosis and recon?guration.
可通過I2C接口訪問集成收發器的寄存器,以進行診斷和重新配置。
It works seemlessly with our MediaGateway, which has one SFP slot.
它與我們的MediaGateway無縫兼容,MediaGateway有一個SFP插槽。
However, the SFP Modules do not work in a “plug-and-play" manner with any SFP-capable system.
In order to set-up the SFP Modules to work in your system, you must be able to interact via I2C and contact Broadcom (the PHY manufacturer) to receive the NDA (Non Disclosure Agreement)
protected PHY-register setting datasheet to initialize the phy properly. In this regard, Technica cannot support, due to NDA restrictions."
但是,SFP 模塊不能與任何支持 SFP 的系統以“即插即用"方式工作。
為了設置 SFP 模塊在您的系統中工作,您必須能夠通過 I2C 進行交互并聯系 Broadcom(PHY 制造商)收到 NDA(保密協議)保護的 PHY 寄存器設置數據表以正確初始化 phy。
對此,由于保密協議的限制,Technica 無法提供支持。
Features 產品特點
100BASE-T1 and SGMII converter
實現100Base-T1和SGMIi轉換
DIP switch for Master/Slave con?guration
通過DIP開關實現Master/Slave配置
Supports I2C for internal register access
收發器的寄存器可以通過I2C接口訪問
Fits into a standard SFP Slot
適用標準的SFP插槽
Power requirements: 3.3 Volt DC
供電:3.3V 直流
Size: 68 x 14 x 14 mm
尺寸:68 x 14 x 14 毫米
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
智能制造網 設計制作,未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
請輸入你感興趣的產品
請簡單描述您的需求
請選擇省份
聯系方式
思佳科技(北京)有限責任公司