￥面議
上海桂倫自動化設備有限公司
免費會員·4年UC2000-全系列德國倍加福P+F超聲波傳感器 UC2000-30GM-E6R2-V15
| 參考價: | 面議 |
具體成交價以合同協議為準- UC2000-全系列 產品型號
- 品牌
- 經銷商 廠商性質
- 上海市 所在地
訪問次數：778更新時間：2022-04-21 18:02:22
聯系我們時請說明是智能制造網上看到的信息，謝謝!
產品簡介
Parameterization interface for the application-specific adjustment of the sensor setting via the service program ULTRA 3000
2 programmable switch outputs
Hysteresi
產品介紹
德國倍加福P+F超聲波傳感器 UC2000-30GM-E6R2-V15
德國倍加福P+F超聲波傳感器 UC2000-30GM-E6R2-V15
參數表節選：的技術參數 UC2000-30GM-E6R2-V15
| 產品闡述 | ||
|---|---|---|
| Single head system | ||
| General specifications | ||
|---|---|---|
| Sensing range | 80 ... 2000 mm | |
| Adjustment range | 120 ... 2000 mm | |
| Dead band | 0 ... 80 mm | |
| Standard target plate | 100 mm x 100 mm | |
| Transducer frequency | approx. 180 kHz | |
| Response delay | 65 ms minimum 195 ms factory setting | |
| Indicators/operating means | ||
| LED green | solid: Power-on flashing: Standby mode or program function object detected | |
| LED yellow 1 | solid: switching state switch output 1 flashing: program function | |
| LED yellow 2 | solid: switching state switch output 2 flashing: program function | |
| LED red | solid: temperature/program plug not connected flashing: fault or program function object not detected | |
| Temperature/TEACH-IN connector | Temperature compensation , Switch points programming , output function setting | |
| Electrical specifications | ||
| Operating voltage | 10 ... 30 V DC , ripple 10 %SS | |
| No-load supply current | ≤ 50 mA | |
| Interface | ||
| Interface type | RS 232, 9600 Bit/s , no parity, 8 data bits, 1 stop bit | |
| Input/Output | ||
| Synchronization | bi-directional 0 level -UB...+1 V 1 level: +4 V...+UB input impedance: > 12 KOhm synchronization pulse: ≥ 100 µs, synchronization interpulse period: ≥ 2 ms | |
| Synchronization frequency | ||
| Common mode operation | max. 30 Hz | |
| Multiplex operation | ≤ 30 Hz / n , n = number of sensors , n ≤ 5 | |
| Output | ||
| Output type | 2 switch outputs PNP, NO/NC, programmable | |
| Rated operating current | 200 mA , short-circuit/overload protected | |
| Voltage drop | ≤ 2.5 V | |
| Repeat accuracy | ≤ 0.1 % of full-scale value | |
| Switching frequency | ≤ 2.5 Hz | |
| Range hysteresis | 1 % of the adjusted operating range (default settings), programmable | |
| Temperature influence | ≤ 2 % from full-scale value (with temperature compensation) ≤ 0.2 %/K (without temperature compensation) | |
| Approvals and certificates | ||
| EAC conformity | TR CU 020/2011 | |
| UL approval | cULus Listed, General Purpose | |
| CSA approval | cCSAus Listed, General Purpose | |
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Mechanical specifications | ||
| Connection type | Connector M12 x 1 , 5-pin | |
| Degree of protection | IP65 | |
| Material | ||
| Housing | stainless steel (1.4305 / AISI 303) PBT plastic parts | |
| Transducer | epoxy resin/hollow glass sphere mixture; polyurethane foam | |
| Mass | 140 g | |
