上海朔川電氣設備有限公司

免費會員·9年

您現在的位置：上海朔川電氣設備有限公司>>智能控制PLC模塊>>西門子工業電器電源6EP>> 西門子6ES73525AH010AE0性能參數

西門子6ES73525AH010AE0性能參數

參考價:	面議

參考價:

面議

具體成交價以合同協議為準

產品型號
品牌
經銷商 廠商性質
上海市 所在地

訪問次數：268更新時間：2017-10-18 10:33:43

在線詢價加入對比查看聯系方式

聯系我們時請說明是智能制造網上看到的信息，謝謝!

分享

智能控制PLC模塊

上海朔川電氣設備有限公司

免費會員·9年

聯系人：: 吉夢琪

在線咨詢給我留言

掃一掃訪問手機商鋪

產品簡介

西門子6ES73525AH010AE0性能參數

產品介紹

西門子6ES73525AH010AE0性能參數 西門子6ES73525AH010AE0性能參數

6ES7352-5AH01-0AE0

SIMATIC S7-300,FM352-5 mit NPN 輸出端, 高 Speed Boolean 處理器, 用于 HOCHGESCHWINDIGKEITS VERKNUEPFUNG,12 DI,8 DO, 1 編碼器接口用于 RS-422-inkr./SSI-Geber

公司名稱：上海朔川電氣設備有限公司
聯 系人：吉夢琪
：
地址：上海市金山區涇波路129號
：2840735331

FM 352-5 高速布爾處理器

訂貨數據
附件
產品信息
組態工具

跳轉到

概述

應用

設計

功能

技術規范

概述

FM 352-5 高速布爾處理器可以進行快速的二進制控制以及提供zui快速的切換處理(循環周期:1 µs)
可以用LAD或FBD編程
指令集包括位指令(STEP 7 指令的子集)、定時器、計數器、分頻器、頻率發生器和移位寄存器
集成12DI/8DO
2種型號：源極和漏極數字量輸出
1 個通道用于連接24V 增量編碼器、5V 增量編碼器(RS422) 或串口值編碼器

FM 352-5 運行時需要一個微存儲器卡

注：

SIMODRIVE Sensor/Motion Connect 500具有位置測量系統和預裝配的連接電纜，用于計數和定位功能。

http://www.siemens。。ｃｏｍ/simatic-technology

應用

FM 352-5 高速布爾處理器可以進行快速的二進制控制以及提供zui快速的切換處理。該模塊已應用在許多領域，包括：

包裝機械
印刷和造紙機械
食品和包裝機械
制藥機械
印刷和打孔

可控制的子過程，包括：

小安裝部件的高速跟蹤
保證“在線”質量(排除故障部件)
工件和機床安全的功能安全
過程邏輯控制

設計

S7-300 模塊，80 mm 寬
40針前連接器，用于連接DI、DO和位置編碼器
提供源極或漏極DO(依模塊型號而定)
帶FM 352-5 程序的 MMC 卡插槽
STOP、RUN 和 RESET 開關
輸入/輸出地址分配(每16字節)，用于與上位S7 CPU進行數據交換
可運行FM 352-5
- 在具有S7-300的*配置中
- 可分布式作為標準PROFIBUS DP從站，通過IM 153-1/IM 153-2連接到S7-300、S7-400、WinAC或第3方主站的內置DP口上
- 可單獨運行，不與上位PLC連接

功能

指令集：
- 二進制指令：
  NO、NC、取反、輸出、RS 存儲器、SR 存儲器、制定上升沿/下降沿
- 轉換功能：
  16 位整數轉換為 32 位整數
- 比較功能:
  16/32 位整數
- 時間發生器：
  脈沖發生器、接通延遲、斷開延遲，每個為 10µs 精度
- 計數器功能：
  16 位加計數，16 位減計數，32 位加/減計數
- 其他功能：
  頻率發生器，頻率刻度，位移寄存器
實際值測量：通過下列方法獲取實際值
- 帶24號電壓的增量編碼器，或
- 帶5號電壓的增量編碼器(RS 422)，或
- SSI 值編碼器
增量編碼器的計數器功能：
- 連續計數
- 單個計數
- 周期計數
- 16或32位值
內置用于位置編碼器的24V電源包
可調節DI濾波器的定時器：
0, 5, 10, 15, 20, 50 µs 和 1.5 ms

運行模式

在STEP 7中用LAD或FBD生成FM 352-5程序
通過S7 CPU或PLCSIM仿真軟件執行仿真和測試
以目標代碼形式編輯FM 352-5程序
可直接通過S7 CPU或通過一個MMC卡直接向模塊下載數據
在RUN位置：FPGA以1微秒循環時間處理程序。
通過16位I/O接口與CPU進行數據交換。

參數

通過STEP 7或COM PROFIBUS以及標準*.GSE文件進行參數賦值。通過*.GSE文件，為了加速切換過程。

技術規范

Article number	6ES7352-5AH01-0AE0	6ES7352-5AH11-0AE0
	FM 352-5, BOOLEAN PROCESSOR 12DE/8DA	FM 352-5 PNP, BOOLEAN PROCESSOR 12DI/8DO
Supply voltage
Rated value (DC)
● 24 V DC	Yes	Yes
Load voltage L+
● Rated value (DC)	24 V	24 V
● permissible range, lower limit (DC)	20.4 V	20.4 V
● permissible range, upper limit (DC)	28.8 V	28.8 V
● Reverse polarity protection	Yes	Yes
Input current
from load voltage1L+, max.	150 mA; typ. 60 mA	150 mA; typ. 60 mA
from load voltage 2L+ (without load), max.	200 mA; typ. 60 mA, DI/DO supply	200 mA; typ. 60 mA, DI/DO supply
from load voltage 3L+ (with encoder), max.	600 mA; typ. 80 mA plus encoder supply	600 mA; typ. 80 mA plus encoder supply
from load voltage 3L+ (without encoder), max.	200 mA; typ. 80 mA	200 mA; typ. 80 mA
from backplane bus 5 V DC, typ.	135 mA	135 mA
Encoder supply
5 V encoder supply
● 5 V	Yes	Yes
● short-circuit protection	Yes; Electronic overload protection; no protection on applying a normal or counter voltage.	Yes; Electronic overload protection; no protection on applying a normal or counter voltage.
● Output current, max.	250 mA	250 mA
24 V encoder supply
● 24 V	Yes	Yes
● Short-circuit protection	Yes; Overvoltage and overheating protection if overloaded; diagnostics if output reaches temperature limit; no protection on applying a normal or counter voltage	Yes; Overvoltage and overheating protection if overloaded; diagnostics if output reaches temperature limit; no protection on applying a normal or counter voltage
● Output current, max.	400 mA	400 mA
Power loss
Power loss, typ.	6.5 W	6.5 W
Memory
Type of memory	RAM	RAM
Memory size	128 kbyte; required for operation, MMC	128 kbyte; required for operation, MMC
Digital inputs
Number of digital inputs	8; Standard and up to 12 with 24 V DC encoder inputs as digital inputs	8; Standard and up to 12 with 24 V DC encoder inputs as digital inputs
Input voltage
● Rated value (DC)	24 V	24 V
● for signal "0"	-30 to +5V	-30 to +5V
● for signal "1"	+11 to +30V	+11 to +30V
Input current
● for signal "0", max. (permissible quiescent current)	1.5 mA	1.5 mA
● for signal "1", typ.	3.8 mA	3.8 mA
Input delay (for rated value of input voltage)
● Input frequency (with a time delay of 0.1 ms), max.	200 kHz	200 kHz
● programmable digital filter delay	None, 5 µs, 10 µs, 15 µs, 20 µs, 50 µs, 1.6 ms	None, 5 µs, 10 µs, 15 µs, 20 µs, 50 µs, 1.6 ms
● Minimum pulse width for program reactions	1 µs, 5 µs, 10 µs, 15 µs, 20 µs, 50 µs, 1,6 ms	1 µs, 5 µs, 10 µs, 15 µs, 20 µs, 50 µs, 1,6 ms
for standard inputs
— at "0" to "1", max.	3 µs; typ. 1.5 µs	3 µs; typ. 1.5 µs
Cable length
● shielded, max.	600 m	600 m
● unshielded, max.	100 m; Shielded cable recommended if filtering delay is set to less than 1.6 ms	100 m; Shielded cable recommended if filtering delay is set to less than 1.6 ms
Digital outputs
Number of digital outputs	8	8
Current-sinking	Yes	No
Current-sourcing	No	Yes
Short-circuit protection	Yes; Overvoltage protection, thermal protection	Yes; Overvoltage protection, thermal protection
● Response threshold, typ.	1.7 to 3.5 A	1.7 to 3.5 A
Limitation of inductive shutdown voltage to	2M -45 V typ., (-40 V to -55 V); comment: no protection against inductive kickback >55 mJ	2M -45 V typ., (-40 V to -55 V); comment: no protection against inductive kickback >55 mJ
Controlling a digital input	No	Yes
Switching capacity of the outputs
● on lamp load, max.	5 W	5 W
Output voltage
● Rated value (DC)	24 V	24 V
● for signal "0", max.	28.8 V	28.8 V
● for signal "1", max.	0.5 V	0.5 V
Output current
● for signal "1" rated value	0.5 A; At 60 °C	0.5 A; At 60 °C
● for signal "1" permissible range for 0 to 60 °C, min.	5 mA	5 mA
● for signal "1" permissible range for 0 to 60 °C, max.	600 mA	600 mA
● for signal "0" residual current, max.	1 mA	1 mA
Output delay with resistive load
● "0" to "1", max.	1 µs; 0.6 µs 50 mA / 1.0 µs 0.5 A	1 µs; 0.6 µs 50 mA / 1.0 µs 0.5 A
● "1" to "0", max.	1.5 µs; 1.7 µs 50 mA / 1.5 µs 0.5 A	1.5 µs; 1.7 µs 50 mA / 1.5 µs 0.5 A
Parallel switching of two outputs
● for uprating	Yes; 2	Yes; 2
Switching frequency
● with resistive load, max.	100 kHz; 20 kHz at 0.5 A; 100 kHz at 0.25 A	100 kHz; 20 kHz at 0.5 A; 100 kHz at 0.25 A
● with inductive load, max.	2 Hz; 2 Hz at 0.5 A with external commutator diodes; 0.5 Hz at 0.5 A without external commutator diodes	2 Hz; 2 Hz at 0.5 A with external commutator diodes; 0.5 Hz at 0.5 A without external commutator diodes
● on lamp load, max.	10 Hz	10 Hz
Cable length
● shielded, max.	600 m	600 m
● unshielded, max.	100 m	100 m
Encoder
Connectable encoders
● Incremental encoder (symmetrical)	Yes	Yes
● Incremental encoder (asymmetrical)	Yes	Yes
● Absolute encoder (SSI)	Yes	Yes
● 2-wire sensor	Yes	Yes
— permissible quiescent current (2-wire sensor), max.	1.5 mA	1.5 mA
Encoder signals, incremental encoder (symmetrical)
● Trace mark signals	A, notA, B, notB	A, notA, B, notB
● Zero mark signal	N, notN	N, notN
● Input voltage	5 V difference signal (phys. RS 422)	5 V difference signal (phys. RS 422)
● Input frequency, max.	500 kHz	500 kHz
● Cable length, shielded, max.	100 m; 100 m with 24 V supply and 500 kHz; 32 m with 5 V supply and 500 kHz	100 m; 100 m with 24 V supply and 500 kHz; 32 m with 5 V supply and 500 kHz
Encoder signals, incremental encoder (asymmetrical)
● Trace mark signals	A, B	A, B
● Zero mark signal	N	N
● Input voltage	24 V	24 V
● Input frequency, max.	200 kHz	200 kHz
● Cable length, shielded, max.	50 m; Cable length, HTL incremental encoder, Siemens, type 6FX2001-4: 50 kHz, 25 m shielded, max., 25 kHz, 50 m shielded, max.	50 m; Cable length, HTL incremental encoder, Siemens, type 6FX2001-4: 50 kHz, 25 m shielded, max., 25 kHz, 50 m shielded, max.
Encoder signals, absolute encoder (SSI)
● Data signal	DATA, notDATA	DATA, notDATA
● Clock signal	CK, notCK	CK, notCK
● egram length, parameterizable	13 or 25 bit	13 or 25 bit
● Clock frequency, max.	1 MHz; 125 kHz, 250 kHz, 500 kHz or 1 MHz	1 MHz; 125 kHz, 250 kHz, 500 kHz or 1 MHz
● Cable length, shielded, max.	320 m; At 125 kHz	320 m; At 125 kHz
● Monoflop time	settable: 16/32/48/64 µs	settable: 16/32/48/64 µs
● Listening mode	Yes; one or two stations	Yes; one or two stations
● Multiturn	Yes; 25 bit message frame	Yes; 25 bit message frame
Encoder signal evaluation
● Counting direction, forward	Yes	Yes
● Counting direction, backward	Yes	Yes
Response times
Input- to output response time	5 V input to 24 V output, 0 filter: 1 to 4 µs (typ.); 24 V input to 24 V output, 0 filter: 2 to 6 µs (typ.)	5 V input to 24 V output, 0 filter: 1 to 4 µs (typ.); 24 V input to 24 V output, 0 filter: 2 to 6 µs (typ.)
Interfaces
Point-to-point
● Updating times	PLC interface: 1.7 ms	PLC interface: 1.7 ms
Interrupts/diagnostics/status information
Alarms
● Diagnostic alarm	Yes; 1L, 2L, 3L missing; MMC error; output overload (8); encoder supply overload; differential wire break; parameterization errror; SSI message frame overflow	Yes; 1L, 2L, 3L missing; MMC error; output overload (8); encoder supply overload; differential wire break; parameterization errror; SSI message frame overflow
● Hardware interrupt	Yes; 8 available; for generation by user program	Yes; 8 available; for generation by user program
Diagnostic messages
● Wire-break in signal transmitter cable	Yes	Yes
● Overflow/underflow	Yes	Yes
● missing load voltage	Yes	Yes
Diagnostics indication LED
● RUN/STOP LED	Yes	Yes
● Module supply 5 V DC (green)	Yes	Yes
● I/O status IOF (red)	Yes	Yes
● Micro Memory Card error MCF (red)	Yes	Yes
● Group error SF (red)	Yes	Yes
● Status indicator digital input (green)	Yes; I 0 to I 11	Yes; I 0 to I 11
● Status indicator digital output (green)	Yes; Q 0 to Q 7	Yes; Q 0 to Q 7
● Overload encoder supply voltage 24 V F (red)	Yes	Yes
● Overload encoder supply voltage 5 V F (red)	Yes	Yes
Counter
Counting range, description	Counting range (16-bit counters): -32,768 to 32,767 (user-specific within this range); counting range (32-bit counters): -2,147,483,648 to 2,147,483,647 (user-specific within this range)	Counting range (16-bit counters): -32,768 to 32,767 (user-specific within this range); counting range (32-bit counters): -2,147,483,648 to 2,147,483,647 (user-specific within this range)
Counting range, lower limit	-2 147 483 648	-2 147 483 648
Counting range, upper limit	2 147 483 647	2 147 483 647
Counting mode
● Counting mode, individual	Yes	Yes
● Counting mode, continuous	Yes	Yes
● Counting mode, periodic	Yes	Yes
Potential separation
between 1L and 2L and 3L	Yes	Yes
Potential separation digital inputs
● Potential separation digital inputs	Yes; Yes CPU, I/O and sensor units are isolated	Yes; Yes CPU, I/O and sensor units are isolated
Degree and class of protection
Degree of protection acc. to EN 60529
● IP20	Yes	Yes
Ambient conditions
Ambient temperature during operation
● min.	0 °C	0 °C
● max.	60 °C	60 °C
Ambient temperature during storage/transportation
● min.	-40 °C	-40 °C
● max.	70 °C	70 °C
Configuration
Programming
● Program cycle time (scan)	1 µs	1 µs
Connection method
required front connector	1x 40-pin	1x 40-pin
Dimensions
Width	80 mm	80 mm
Height	125 mm	125 mm
Depth	120 mm	120 mm
Weights
Weight, approx.	434 g; Module weight: approx. 434 g (with 1L connection and without I/O connection or MMC); shipping weight: approx. 500 g (with bus and 1L connection and without I/O connection or MMC)	434 g; Module weight: approx. 434 g (with 1L connection and without I/O connection or MMC); shipping weight: approx. 500 g (with bus and 1L connection and without I/O connection or MMC)