上海朔川電氣設備有限公司

免費會員·9年

您現在的位置：上海朔川電氣設備有限公司>>西門子S7-1200>> 西門子6ES72121BE400XB0性能參數

西門子6ES72121BE400XB0性能參數

參考價:	面議

參考價:

面議

具體成交價以合同協議為準

產品型號
品牌
經銷商 廠商性質
上海市 所在地

訪問次數：301更新時間：2017-10-18 14:53:26

在線詢價 加入對比查看聯系方式

聯系我們時請說明是智能制造網上看到的信息，謝謝!

分享

西門子S7-1200

上海朔川電氣設備有限公司

免費會員·9年

聯系人：: 吉夢琪

在線咨詢給我留言

掃一掃訪問手機商鋪

產品簡介

西門子6ES72121BE400XB0性能參數

產品介紹

西門子6ES72121BE400XB0性能參數 西門子6ES72121BE400XB0性能參數

6ES7212-1BE40-0XB0

SIMATIC S7-1200,CPU 1212C, 緊湊型 CPU,AC/DC/繼電器, onboard I/O: 8 DI DC 24V;6 DO 繼電器 2A; 2 AI 0-10V DC, 電源:交流 85-264V AC bei 47-63Hz, 程序/數據存儲器 75 KB

公司名稱：上海朔川電氣設備有限公司
聯 系人：吉夢琪
：
地址：上海市金山區涇波路129號
：2840735331

CPU 1212C

訂貨數據
附件
產品信息
組態工具

跳轉到

概述

設計

功能

編程

技術規范

更多信息

概述

S7 入門級控制器，帶有基本擴展選件
可通過以下方式擴展：
- 1 個信號板 (SB)、電池板 (BB) 或通信板 (CB)
- 2 個信號模板 (SM)
- zui多 3 個通信模塊 (CM)

設計

緊湊型 CPU 1212C 具有：

3 種設備類型，帶有不同的電源和控制電壓
集成的電源，可作為寬范圍交流或直流電源（85 至 264 V 交流或 24 V 直流）
集成的 24 V 編碼器/負載電流源：
用于直接連接傳感器和編碼器。300 mA 輸出電流，也可用作負載電源
8 點集成 24 V 直流數字量輸入（漏電流/源電流（IEC 1 型漏電流））
6 點集成數字量輸出，24 V 直流或繼電器
2 點集成模擬量輸入，0 至 10 V
2 點脈沖輸出 (PTO)，頻率高達 100 kHz
脈沖寬度調制輸出 (PWM)，頻率高達 100 kHz
集成以太網接口（TCP/IP native、ISO-on-TCP）
4 個快速計數器（3 個zui大頻率為 100 kHz；1 個zui大頻率為 30 kHz），帶有可參數化的使能和復位輸入，可以同時用作帶有 2 點單獨輸入的加減計數器，或用于連接增量型編碼器
通過附加通訊接口擴展，例如，RS485 或 RS232
通過信號板使用模擬或數字信號直接在 CPU 上擴展（保持 CPU 安裝尺寸）
通過信號模塊使用各種模擬量和數字量輸入和輸出信號擴展
可選存儲器擴展（SIMATIC 存儲卡）
PID 控制器，具有自動調諧功能
集成實時時鐘
中斷輸入：
對過程信號的上升沿或下降沿作出極為快速的響應
所有模塊上均為可拆卸的端子
仿真器（可選）：
用于仿真集成輸入和測試用戶程序

設備型號
型號	電源電壓	輸入電壓 DI	輸出電壓 DO	輸出電流
DC/DC/DC	24 V DC	24 V DC	24 V DC	0.5 A, 晶體管
直流/直流/繼電器	24 V DC	24 V DC	5 … 30 V DC / 5 … 250 V AC	2 A; 30 W DC / 200 W AC
交流/直流/繼電器	85 … 264 V AC	24 V DC	5 … 30 V DC / 5 … 250 V AC	2 A; 30 W DC / 200 W AC

功能

豐富的指令集:
運算種類眾多，便于編程：
- 基本運算，如二進制邏輯運算、結果分配、保存、計數、創建時間、加載、傳輸、比較、移動、旋轉、創建補數、調用子程序（帶有局部變量）
- 集成通訊命令（例如，USS 協議、Modbus RTU、S7 通訊“T-Send/T-Receive”（T 發送/T 接收）或自由端口模式 (Freeport)）
- 使用簡便的功能，如脈沖寬度調制、脈沖序列功能、運算功能、浮點運算功能、PID 閉環控制、跳轉功能、環路功能和代碼轉換
- 數學函數，例如 SIN、COS、TAN、LN、EXP
計數:
用戶友好的計數功能配以集成的計數器和高速計數器指令給用戶開辟了新的應用領域
中斷處理：
- 邊緣觸發中斷（通過中斷輸入上過程信號的上升沿或下降沿激活）支持對過程事件的快速響應。
- 時間觸發中斷。
- 可以在達到設定值或計數方向改變時觸發計數器中斷。
- 通訊中斷允許與外圍設備（如打印機或條形碼閱讀器）快速、簡單地交換信息
口令保護
測試和診斷功能：
易于使用的功能支持測試和診斷，例如，在線/離線診斷
在測試和診斷過程中“強制”輸入和輸出：
可以獨立于循環設置輸入和輸出，因此，可以*設置輸入和輸出，例如，用于測試用戶程序
按照 PLCopen 對簡單運動進行的運動控制
庫功能

編程

通過 STEP 7 Basic 編程軟件包，所有 S7-1200 控制器和相關 I/O 可進行全面編程。

技術規范

Article number	6ES7212-1BE40-0XB0	6ES7212-1AE40-0XB0	6ES7212-1HE40-0XB0
	CPU 1212C, AC/DC/RELAY, 8DI/6DO/2AI	CPU 1212C ,DC/DC/DC, 8DI/6DO/2AI	CPU 1212C, DC/DC/RELAY, 8DI/6DO/2AI
General information
Product type designation		CPU 1212C DC/DC/DC
Firmware version	V4.2		V4.2
Engineering with
● Programming package	STEP 7 V14 or higher	STEP 7 V13 SP1 or higher	STEP 7 V14 or higher
Supply voltage
Rated value (DC)
● 24 V DC		Yes	Yes
permissible range, lower limit (DC)		20.4 V	20.4 V
permissible range, upper limit (DC)		28.8 V	28.8 V
Rated value (AC)
● 120 V AC	Yes
● 230 V AC	Yes
permissible range, lower limit (AC)	85 V
permissible range, upper limit (AC)	264 V
Reverse polarity protection			Yes
Line frequency
● permissible range, lower limit	47 Hz
● permissible range, upper limit	63 Hz
Load voltage L+
● Rated value (DC)		24 V	24 V
● permissible range, lower limit (DC)		20.4 V	20.4 V
● permissible range, upper limit (DC)		28.8 V	28.8 V
Input current
Current consumption (rated value)	80 mA at 120 V AC; 40 mA at 240 V AC	400 mA; Typical	400 mA; CPU only
Current consumption, max.	240 mA at 120 V AC; 120 mA at 240 V AC		1 200 mA; CPU with all expansion modules
Inrush current, max.	20 A; at 264 V	12 A; at 28.8 V DC	12 A; at 28.8 V
I²t	0.8 A²·s		0.8 A²·s
Output current
for backplane bus (5 V DC), max.	1 000 mA; Max. 5 V DC for SM and CM	1 000 mA; Max. 5 V DC for SM and CM	1 000 mA; Max. 5 V DC for SM and CM
Encoder supply
24 V encoder supply
● 24 V	20.4 to 28.8V	Permissible range: 20.4V to 28.8V	L+ minus 4 V DC min.
Power loss
Power loss, typ.	11 W	9 W	9 W
Memory
Work memory
● integrated	75 kbyte	50 kbyte	75 kbyte
● expandable	No	No	No
Load memory
● integrated	2 Mbyte	1 Mbyte	2 Mbyte
● Plug-in (SIMATIC Memory Card), max.	with SIMATIC memory card	2 Gbyte; with SIMATIC memory card	with SIMATIC memory card
Backup
● present	Yes	Yes; maintenance-free	Yes
● maintenance-free	Yes		Yes
● without battery	Yes	Yes	Yes
CPU processing times
for bit operations, typ.	0.08 µs; / instruction	0.085 µs; / Operation	0.08 µs; / instruction
for word operations, typ.	1.7 µs; / instruction	1.7 µs; / Operation	1.7 µs; / instruction
for floating point arithmetic, typ.	2.3 µs; / instruction	2.3 µs; / Operation	2.3 µs; / instruction
CPU-blocks
Number of blocks (total)	DBs, FCs, FBs, counters and timers. The maximum number of addressable blocks ranges from 1 to 65535. There is no restriction, the entire working memory can be used	DBs, FCs, FBs, counters and timers. The maximum number of addressable blocks ranges from 1 to 65535. There is no restriction, the entire working memory can be used	DBs, FCs, FBs, counters and timers. The maximum number of addressable blocks ranges from 1 to 65535. There is no restriction, the entire working memory can be used
OB
● Number, max.	Limited only by RAM for code	Limited only by RAM for code	Limited only by RAM for code
Data areas and their retentivity
Retentive data area (incl. timers, counters, flags), max.	10 kbyte	10 kbyte	10 kbyte
Flag
● Number, max.	4 kbyte; Size of bit memory address area	4 kbyte; Size of bit memory address area	4 kbyte; Size of bit memory address area
Local data
● per priority class, max.	16 kbyte; Priority class 1 (program cycle): 16 KB, priority class 2 to 26: 6 KB		16 kbyte; Priority class 1 (program cycle): 16 KB, priority class 2 to 26: 6 KB
Address area
I/O address area
● Inputs		1 024 byte
● Outputs		1 024 byte
Process image
● Inputs, adjustable	1 kbyte	1 kbyte	1 kbyte
● Outputs, adjustable	1 kbyte	1 kbyte	1 kbyte
Hardware configuration
Number of modules per system, max.	3 comm. modules, 1 signal board, 2 signal modules	3 comm. modules, 1 signal board, 2 signal modules	3 comm. modules, 1 signal board, 2 signal modules
Time of day
Clock
● Hardware clock (real-time)	Yes	Yes	Yes
● Backup time	480 h; Typical	480 h; Typical	480 h; Typical
● Deviation per day, max.	±60 s/month at 25 °C	±60 s/month at 25 °C	±60 s/month at 25 °C
Digital inputs
Number of digital inputs	8; Integrated	8; Integrated	8; Integrated
● of which inputs usable for technological functions	4; HSC (High Speed Counting)	6; HSC (High Speed Counting)	4; HSC (High Speed Counting)
Source/sink input	Yes	Yes	Yes
Number of simultaneously controllable inputs
all mounting positions
— up to 40 °C, max.	8	8	8
Input voltage
● Rated value (DC)	24 V	24 V	24 V
● for signal "0"	5 V DC at 1 mA	5 V DC at 1 mA	5 V DC at 1 mA
● for signal "1"	15 V DC at 2.5 mA	15 V DC at 2.5 mA	15 V DC at 2.5 mA
Input current
● for signal "1", typ.		1 mA
Input delay (for rated value of input voltage)
for standard inputs
— parameterizable	0.2 ms, 0.4 ms, 0.8 ms, 1.6 ms, 3.2 ms, 6.4 ms and 12.8 ms, selectable in groups of four	0.1 / 0.2 / 0.4 / 0.8 / 1.6 / 3.2 / 6.4 / 10.0 / 12.8 / 20.0 μs; 0.05 / 0.1 / 0.2 / 0.4 / 0.8 / 1.6 / 3.2 / 6.4 / 10.0 / 12.8 / 20.0 ms	0.2 ms, 0.4 ms, 0.8 ms, 1.6 ms, 3.2 ms, 6.4 ms and 12.8 ms, selectable in groups of four
— at "0" to "1", min.	0.2 ms	0.1 µs	0.2 ms
— at "0" to "1", max.	12.8 ms	20 ms	12.8 ms
for interrupt inputs
— parameterizable	Yes	Yes	Yes
for counter/technological functions
— parameterizable	Single phase: 3 @ 100 kHz & 3 @ 30 kHz, differential: 3 @ 80 kHz & 3 @ 30 kHz	Single phase: 3 @ 100 kHz & 1 @ 30 kHz, differential: 3 @ 80 kHz & 1 @ 30 kHz	Single phase: 3 @ 100 kHz & 3 @ 30 kHz, differential: 3 @ 80 kHz & 3 @ 30 kHz
Cable length
● shielded, max.	500 m; 50 m for technological functions	500 m; 50 m for technological functions	500 m; 50 m for technological functions
● unshielded, max.	300 m; For technological functions: No	300 m; For technological functions: No	300 m; For technological functions: No
Digital outputs
Number of digital outputs	6; Relays	6	6; Relays
● of which high-speed outputs		4; 100 kHz Pulse Train Output
Short-circuit protection		No; to be provided externally
Limitation of inductive shutdown voltage to		L+ (-48 V)
Switching capacity of the outputs
● with resistive load, max.	2 A	0.5 A	2 A
● on lamp load, max.	30 W with DC, 200 W with AC	5 W	30 W with DC, 200 W with AC
Output voltage
● for signal "0", max.		0.1 V; with 10 kOhm load
● for signal "1", min.		20 V
Output current
● for signal "1" rated value		0.5 A
● for signal "0" residual current, max.		0.1 mA
Output delay with resistive load
● "0" to "1", max.	10 ms; max.	1 µs	10 ms; max.
● "1" to "0", max.	10 ms; max.	3 µs	10 ms; max.
Switching frequency
● of the pulse outputs, with resistive load, max.		100 kHz
Relay outputs
● Number of operating cycles, max.	mechanically 10 million, at rated load voltage 100 000		mechanically 10 million, at rated load voltage 100 000
Cable length
● shielded, max.	500 m	500 m	500 m
● unshielded, max.	150 m	150 m	150 m
Analog inputs
Number of analog inputs	2	2	2
Input ranges
● Voltage	Yes	Yes	Yes
Input ranges (rated values), voltages
● 0 to +10 V	Yes	Yes	Yes
● Input resistance (0 to 10 V)	≥100k ohms	≥100k ohms	≥100k ohms
Cable length
● shielded, max.	100 m; twisted and shielded	100 m; twisted and shielded	100 m; twisted and shielded
Analog outputs
Number of analog outputs	0	0	0
Cable length
● shielded, max.		100 m; shielded, twisted pair
Analog value generation for the inputs
Integration and conversion time/resolution per channel
● Resolution with overrange (bit including sign), max.	10 bit	10 bit	10 bit
● Integration time, parameterizable	Yes	Yes	Yes
● Conversion time (per channel)	625 µs	625 µs	625 µs
Encoder
Connectable encoders
● 2-wire sensor	Yes	Yes	Yes
1. Interface
Interface type	PROFINET	PROFINET	PROFINET
Physics	Ethernet	Ethernet	Ethernet
Isolated	Yes	Yes	Yes
automatic detection of transmission rate	Yes	Yes	Yes
Autonegotiation	Yes	Yes	Yes
Autocrossing	Yes	Yes	Yes
Interface types
● Number of ports	1		1
● integrated switch	No		No
Functionality
● PROFINET IO Controller	Yes	Yes	Yes
● PROFINET IO Device	Yes	Yes	Yes
● SIMATIC communication	Yes		Yes
● Open IE communication	Yes		Yes
● Web server	Yes		Yes
● Media redundancy	No		No
PROFINET IO Controller
● Transmission rate, max.	100 Mbit/s		100 Mbit/s
Services
— PG/OP communication	Yes		Yes
— S7 routing	Yes		Yes
— Isochronous mode	No		No
— Open IE communication	Yes		Yes
— IRT	No		No
— MRP	No		No
— MRPD	No		No
— PROFIenergy	No		No
— Prioritized startup	Yes		Yes
— Number of IO devices with prioritized startup, max.	16	16	16
— Number of connectable IO Devices, max.	16		16
— Number of connectable IO Devices for RT, max.	16		16
— of which in line, max.	16		16
— Activation/deactivation of IO Devices	Yes		Yes
— Number of IO Devices that can be simultaneously activated/deactivated, max.	8		8
— Updating time	The minimum value of the update time also depends on the communication component set for PROFINET IO, on the number of IO devices and the quantity of configured user data.		The minimum value of the update time also depends on the communication component set for PROFINET IO, on the number of IO devices and the quantity of configured user data.
PROFINET IO Device
Services
— PG/OP communication	Yes		Yes
— S7 routing	Yes		Yes
— Isochronous mode	No		No
— Open IE communication	Yes		Yes
— IRT	No		No
— MRP	No		No
— MRPD	No		No
— PROFIenergy	Yes		Yes
— Shared device	Yes		Yes
— Number of IO Controllers with shared device, max.	2		2
Protocols
Supports protocol for PROFINET IO	Yes	Yes	Yes
PROFIBUS	Yes; CM 1243-5 required	Yes; CM 1243-5 required	Yes; CM 1243-5 required
AS-Interface	Yes; CM 1243-2 required	Yes	Yes; CM 1243-2 required
Protocols (Ethernet)
● TCP/IP	Yes	Yes	Yes
● DHCP	No		No
● SNMP	Yes		Yes
● DCP	Yes		Yes
● LLDP	Yes		Yes
Open IE communication
● TCP/IP
— Data length, max.	8 kbyte		8 kbyte
● ISO-on-TCP (RFC1006)	Yes	Yes	Yes
— Data length, max.	8 kbyte		8 kbyte
● UDP
— Data length, max.	1 472 byte		1 472 byte
Further protocols
● MODBUS	Yes	Yes	Yes
Communication functions
S7 communication
● supported	Yes	Yes	Yes
● as server	Yes	Yes	Yes
● as client	Yes	Yes	Yes
● User data per job, max.	See online help (S7 communication, user data size)		See online help (S7 communication, user data size)
Open IE communication
● TCP/IP	Yes	Yes	Yes
● UDP	Yes	Yes	Yes
Web server
● supported	Yes	Yes	Yes
● User-defined websites	Yes	Yes	Yes
Number of connections
● overall	16; dynamically		16; dynamically
Test commissioning functions
Status/control
● Status/control variable	Yes	Yes	Yes
● Variables	Inputs/outputs, memory bits, DBs, distributed I/Os, timers, counters	Inputs/outputs, memory bits, DBs, distributed I/Os, timers, counters	Inputs/outputs, memory bits, DBs, distributed I/Os, timers, counters
Forcing
● Forcing	Yes	Yes	Yes
Diagnostic buffer
● present	Yes	Yes	Yes
Traces
● Number of configurable Traces	2	2; Up to 512 KB of data per trace are possible	2
● Memory size per trace, max.	512 kbyte		512 kbyte
Interrupts/diagnostics/status information
Diagnostics indication LED
● RUN/STOP LED	Yes		Yes
● ERROR LED	Yes		Yes
● MAINT LED	Yes		Yes
Integrated Functions
Number of counters	4	6	4
Counting frequency (counter) max.	100 kHz	100 kHz	100 kHz
Frequency meter	Yes	Yes	Yes
controlled positioning	Yes	Yes	Yes
Number of position-controlled positioning axes, max.	8		8
Number of positioning axes via pulse-direction interface	Up to 4 with SB 1222		Up to 4 with SB 1222
PID controller	Yes	Yes	Yes
Number of alarm inputs	4	4	4
Number of pulse outputs		4
Limit frequency (pulse)		100 kHz
Potential separation
Potential separation digital inputs
● Potential separation digital inputs	500V AC for 1 minute	500V AC for 1 minute	500V AC for 1 minute
● between the channels, in groups of	1	1	1
Potential separation digital outputs
● Potential separation digital outputs	Relays	500V AC for 1 minute	Relays
● between the channels	No		No
● between the channels, in groups of	2	1	2
Permissible potential difference
between different circuits		500 V DC between 24 V DC and 5 V DC
EMC
Interference immunity against discharge of static electricity
● Interference immunity against discharge of static electricity acc. to IEC 61000-4-2	Yes	Yes	Yes
— Test voltage at air discharge	8 kV	8 kV	8 kV
— Test voltage at contact discharge	6 kV	6 kV	6 kV
Interference immunity to cable-borne interference
● Interference immunity on supply lines acc. to IEC 61000-4-4	Yes	Yes	Yes
● Interference immunity on signal cables acc. to IEC 61000-4-4	Yes	Yes	Yes
Interference immunity against voltage surge
● on the supply lines acc. to IEC 61000-4-5	Yes	Yes	Yes
Interference immunity against conducted variable disturbance induced by high-frequency fields
● Interference immunity against high-frequency radiation acc. to IEC 61000-4-6	Yes	Yes	Yes
Emission of radio interference acc. to EN 55 011
● Limit class A, for use in industrial areas	Yes; Group 1	Yes; Group 1	Yes; Group 1
● Limit class B, for use in residential areas	Yes; When appropriate measures are used to ensure compliance with the limits for Class B according to EN 55011	Yes; When appropriate measures are used to ensure compliance with the limits for Class B according to EN 55011	Yes; When appropriate measures are used to ensure compliance with the limits for Class B according to EN 55011
Degree and class of protection
Degree of protection acc. to EN 60529
● IP20	Yes	Yes	Yes
Standards, approvals, certificates
CE mark	Yes	Yes	Yes
UL approval	Yes	Yes	Yes
cULus	Yes	Yes	Yes
FM approval	Yes	Yes	Yes
RCM (formerly C-TICK)	Yes	Yes	Yes
KC approval	Yes		Yes
Marine approval	Yes	Yes	Yes
Ambient conditions
Free fall
● Fall height, max.	0.3 m; five times, in product package	0.3 m; five times, in product package	0.3 m; five times, in product package
Ambient temperature during operation
● min.	-20 °C	-20 °C	-20 °C
● max.	60 °C; Number of simultaneously activated inputs or outputs 4 or 3 (no adjacent points) at 60 °C horizontal or 50 °C vertical, 8 or 6 at 55 °C horizontal or 45 °C vertical	60 °C; Number of simultaneously activated inputs or outputs 4 or 3 (no adjacent points) at 60 °C horizontal or 50 °C vertical, 8 or 6 at 55 °C horizontal or 45 °C vertical	60 °C; Number of simultaneously activated inputs or outputs 4 or 3 (no adjacent points) at 60 °C horizontal or 50 °C vertical, 8 or 6 at 55 °C horizontal or 45 °C vertical
● horizontal installation, min.	-20 °C	-20 °C	-20 °C
● horizontal installation, max.	60 °C	60 °C	60 °C
● vertical installation, min.	-20 °C	-20 °C	-20 °C
● vertical installation, max.	50 °C	50 °C	50 °C
Ambient temperature during storage/transportation
● min.	-40 °C	-40 °C	-40 °C
● max.	70 °C	70 °C	70 °C
Air pressure acc. to IEC 60068-2-13
● Operation, min.	795 hPa	795 hPa	795 hPa
● Operation, max.	1 080 hPa	1 080 hPa	1 080 hPa
● Storage/transport, min.	660 hPa	660 hPa	660 hPa
● Storage/transport, max.	1 080 hPa	1 080 hPa	1 080 hPa
● permissible operating height	-1000 to 2000 m	-1000 to 2000 m	-1000 to 2000 m
Relative humidity
● Operation, max.	95 %; no condensation	95 %; no condensation	95 %; no condensation
Vibrations
● Vibrations	2 g (m/s²) wall mounting, 1 g (m/s²) DIN rail	2 g (m/s²) wall mounting, 1 g (m/s²) DIN rail	2 g (m/s²) wall mounting, 1 g (m/s²) DIN rail
● Operation, tested according to IEC 60068-2-6	Yes	Yes	Yes
Shock test
● tested according to IEC 60068-2-27	Yes; IEC 68, Part 2-27 half-sine: strength of the shock 15 g (peak value), duration 11 ms	Yes; IEC 68, Part 2-27 half-sine: strength of the shock 15 g (peak value), duration 11 ms	Yes; IEC 68, Part 2-27 half-sine: strength of the shock 15 g (peak value), duration 11 ms
Pollutant concentrations
● SO2 at RH < 60% without condensation	S02: < 0.5 ppm; H2S: < 0.1 ppm; RH < 60% condensation-free	S02: < 0.5 ppm; H2S: < 0.1 ppm; RH < 60% condensation-free	S02: < 0.5 ppm; H2S: < 0.1 ppm; RH < 60% condensation-free
Programming
Programming language
— LAD	Yes	Yes	Yes
— FBD	Yes	Yes	Yes
— SCL	Yes	Yes	Yes
Know-how protection
● User program protection/password protection	Yes		Yes
● Copy protection	Yes		Yes
● Block protection	Yes		Yes
Access protection
● Protection level: Write protection	Yes		Yes
● Protection level: Read/write protection	Yes		Yes
● Protection level: Complete protection	Yes		Yes
Cycle time monitoring
● adjustable	Yes	Yes	Yes
Dimensions
Width	90 mm	90 mm	90 mm
Height	100 mm	100 mm	100 mm
Depth	75 mm	75 mm	75 mm
Weights
Weight, approx.	425 g	370 g	385 g