福尼斯焊機系統組件包括電源、水箱、機器人配件、送絲機、行走機構等。焊接功能包有：焊接包， MIG/MAG標準Synergic焊接，MIG/MAG脈沖Synergic焊接，Low Spatter Control低飛濺浸粘過渡電弧焊接工藝，增強型脈沖電弧焊接工藝。

福尼斯焊機Fronius焊機伏能士TPS600i智能焊機華南技術服務中心

廣州音科機電設備有限公司專業銷售奧地利Fronius焊機福尼斯焊機，Fronius福尼斯TPS/i智能平臺焊機系統，Fronius福尼斯TPS/CMT焊機系統，Fronius福尼斯TPS/TS系列焊機，Fronius福尼斯氬弧焊機，Fronius福尼斯手工焊機。

福尼斯焊機系統組件包括電源、水箱、機器人配件、送絲機、行走機構等。焊接功能包有：焊接包， MIG/MAG標準Synergic焊接，MIG/MAG脈沖Synergic焊接，Low Spatter Control低飛濺浸粘過渡電弧焊接工藝，增強型脈沖電弧焊接工藝。

The MIG/MAG standard synergic welding process is a MIG/MAG welding process across
the entire power range of the power source with the following arc types:
Short circuit arc
Droplet transfer takes place during a short circuit in the lower power range.
Intermediate arc
The droplet increases in size on the end of the wire electrode and is transferred in the midpower range during the short circuit.
Spray arc
A short circuit-free transfer of material in the high power range.
Special welding characteristic properties provided by additional hardware
ADV Additional hardware for the CMT welding process:
Inverter module for alternating current processes
Negatively poled process phase with low heat input and high deposition rate
Additional hardware for the MIG/MAG LSC welding process:
Electronic switch for interrupting power
Maximum reduction in current caused by opening the circuit in each
required process phase
only in combination with TPS 400i LSC ADV
CMT mix Additional hardware:
CMT drive unit
Characteristic with process switch between pulsed and CMT, where
the CMT process is initiated by wire movement reversal.
mix drive Additional hardware:
PushPull drive unit
Characteristic with process switch between pulsed and dip transfer
arc, where the dip transfer arc is initiated by wire movement reversal.
ripple drive Additional hardware:
CMT drive unit, RA Drive
Characteristic that behaves like interval mode for clear weld rippling,
especially with aluminium
30
Summary of the
PMC process
PMC = Pulse Multi Control
PMC is a pulsed arc welding process with high-speed data processing, precise recording
of the process status and improved droplet detachment. Faster welding possible with a stable arc and even fusion penetration