siemens通訊電纜屏蔽6XV1830-0EH10

6XV1830-0EH10

SIMATIC NET, PROFIBUS 快速標準電纜 GP, 2 芯, 屏蔽, 為快速安裝而特殊設計，zui大長度: 1000m, zui小訂購數(shù)量: 20m, 按米銷售

6XV1830-0EH10 SIMATIC NET, PROFIBUS 快速標準電纜 GP, 2 芯, 屏蔽, 為快速安裝而特殊設計，zui大長度: 1000m, zui小訂購數(shù)量: 20m, 按米銷售

siemens通訊電纜屏蔽6XV1830-0EH10

Overview

SIDOOR ATD410W machine tool door drive

The SIDOOR ATD410W machine tool door drive enables the quick, easy and versatile installation, configuration and operation of a wide range of industrial door drive systems.

• USS module design: USS communications interface for connection to ET 200-type higher-level controllers, SIMATIC S7?1200, SIMATIC S7?1500 and SIMATIC S7?300 via USS interface
• For dynamic door weights up to 600 kg
• Automatic door weight detection
• Operating temperature -20 to +50 °C
• Flexible motor management (five different motor types), automatic detection
• Opening width 0.3 to 4 m
• Emergency power input via special emergency power module 24 V DC ± 15 %
• Auxiliary power output 24 V DC ± 15 %; 0.4 A (short-circuit-proof)
• Output stage short-circuit-proof
• Degree of protection IP20
• Belt break detection
• Supports electro-sensitive protective equipment ESPE TYPE2 according to IEC 61496?1
• Supports DCPS sensors
• Slow approach to obstruction position
• Assisted Drive, Impulse Stop
• Impulse Drive
• Displays the current operating states on a 7-segment display directly on the controller or with the Software Kit or Service Tool
• All door parameters can be assigned via the PROFIdrive profile with the function block provided. For details see the System Manual “SIDOOR AT40, ATD400V, ATD400K, ATD400W, ATD410W, ATD400S, ATE250S”, ATD400T http://support.automation.siemens.com/WW/view/en/58531074

Benefits

• 1-button operation for the entire commissioning process
• Optimum and stable drive characteristics
• Reduced service requirements and costs
• SIDOOR User Software (part of the Software Kit, not included in the scope of supply, see "Additional units") enables user-friendly operation and detailed diagnostics.
• Integrated terminal module enables simple setup and diagnostics via an event and statistics memory.
• Small footprint thanks to compact design
• Complete parameter assignment via PROFIDrive profile in STEP7 and TIA

Area of application

The SIDOOR ATD410W machine tool door drive is an inligent door control system that enables protective doors on machine tools to be opened and closed at adjustable speeds and accelerations.

The maintenance-free, variable speed drive unit comprises a DC motor with non-self-locking gearing.

Five different motors are available:

• SIDOOR MDG180 geared motor 
  (30 V DC/4.0 A; motor for max. overall door leaf weight of 180 kg, degree of protection IP56)
• SIDOOR MDG400 geared motor 
  (30 V DC/4.0 A; motor for max. overall door leaf weight of 400 kg, degree of protection IP56)
• SIDOOR M3 geared motor 
  (30 V DC/4.0 A; motor for max. overall door leaf weight of 180 kg, degree of protection IP40)
• SIDOOR M4 geared motor 
  (30 V DC/4.0 A; motor for max. overall door leaf weight of 400 kg, degree of protection IP40)
• SIDOOR M5 geared motor 
  (30 V DC/7.5 A, motor for max. overall door leaf weight of 600 kg, degree of protection IP54)

They must be ordered separay, see "Geared motors".

Operation of the door drive does not require limit switches. The door width and the "OPEN"/"CLOSE" positions are determined automatically.

The current operating states are indicated by a 7?segment display directly in the SIDOOR ATD410W machine tool door drive. They can also be displayed externally using the Software Kit or Service Tool, see "Additional units". The associated function block can be used for configuration and parameter assignment purposes, see "Programming".

Forces are transferred via a toothed belt, which passes over a deflector unit and can be fitted with two door clutch holders. The accessories are not included in the scope of supply, see "Accessories".

This enables handling of both one-sided and centrally opening doors.

Design

The SIDOOR ATD410W machine tool door drive system consists of a number of components:

Configuration

During initial commissioning, please note the following:

• For mechanical installation and configuration see "SIDOOR Door Control Systems AT40, ATD400K, ATD400S, ATD400V, ATD400W" Manual,http://support.automation.siemens.com/WW/view/en/58531074
• Electrical configuration and commissioning:
  • Push the door into the "CLOSED" position.
  • Open the device cover
  • Plug in the motor connector
  • Connect NT40 switch mode power supply to 230 V AC mains supply
  • Press and hold the learn run button
  • Connect the NT40 switch mode power supply output to the input of the SIDOOR ATD410W machine tool door drive
  • The learn run starts automatically and the learn run button can be released.
  • On completion of the learn run, the door is in the "CLOSED" position and the 7-segment display indicates "u".
  • The door can now be moved via the "OPEN" and "CLOSE" buttons with the default profile.

The SIDOOR ATD410W machine tool door drive is configured in STEP 7 or in the TIA Portal with the function block provided.

Programming

The Software Kit is available as an additional unit (see "Additional units") and allows quick and easy updating of the firmware using the Siemens HCS12 Firmware Loader.

User-friendly parameter setting and oscilloscope function is carried out via the SIDOOR User Software (part of the Software Kit).

All door parameters of the SIDOOR ATD410W machine tool door drive can be assigned via the PROFIDrive profile with the function block provided.

For details see "SIDOOR Door Control Systems AT40, ATD400K, ATD400S, ATD400V, ATD400W" Manual,http://support.automation.siemens.com/WW/view/en/58531074

More information

For further product details, see

• System Manual "SIDOOR AT40, ATD400V, ATD400K, ATD4xxW, ATD400S, ATE250S, ADT400T",http://support.automation.siemens.com/WW/view/en/58531074
• Operating Instructions "SIDOOR controllers for protective machine doors",http://support.automation.siemens.com/WW/view/en/85104115