精品乱码一区内射人妻无码-亚洲中文AⅤ中文字幕在线-免费不卡国产福利在线观看-国产综合无码一区二区色蜜蜜

手 機：

DAG    RF-07-70.04    主軸
EDAG    RF-07-70.05    主軸

WUT    RS232 line driver 80201總線驅動器秒報價

OFEL    N:90874 GIRI:1360 TIPO 132M2 4-16 HP:7 GIRI:33     異步電機
OFEL    V132M2/4-16P 7HP    異步電機
SCHMALENBERGER    FZF 65-20/4 50HZ no:2008010527/10 motor:132M/4B-31 

IMB5 440-480V     泵

EDAG    RF-07-70.06    主軸
EDAG    RF_20_01_01_08    滑輪
EDAG    RF-09-01-20    主軸
EDAGE    RF-08-20.03    滑輪
EDAGE    RF-07-70.02    主軸
EDAGE    R1605 804 31.140mm    滑輪

Block    GLC 230/24-5    電源
Block    STEU 160/23    變壓器1
Block    BLOCK-Art.-Nr.: HLD 110-500/30    電磁干擾濾波器
Block    STE100/23/24    變壓器1
Block    GLC 400/24-1    電源
Block    NKD 10/2,93    變壓器

WUT    RS232 line driver 80201總線驅動器秒報價

KNIEL    CG 24.4 110-003-02 02電源
BEINLICH    ZAD 1000636 ZPD 1-3.8-KP-L-F/R/VMAG    屏蔽泵
Magnet-Schultz    ASEW 001 D08壓力傳感器  

GELBAU    3004.5246U 452.46U Cat.3繼電器秒報價

OFEL    N:90874 GIRI:1360 TIPO 132M2 4-16 HP:7 GIRI:33     異步電機
OFEL    V132M2/4-16P 7HP    異步電機
SCHMALENBERGER    FZF 65-20/4 50HZ no:2008010527/10 motor:132M/4B-31 

IMB5 440-480V     泵

KNIEL    CG 24.4 110-003-02 02電源
BEINLICH    ZAD 1000636 ZPD 1-3.8-KP-L-F/R/VMAG    屏蔽泵
Magnet-Schultz    ASEW 001 D08壓力傳感器  

GELBAU    3004.5246U 452.46U Cat.3繼電器秒報價

2,3/2/18    變壓器
Block    VCM36/1/9    變流器
Block    VCM25/2/12    變流器
Block    VB3,2/2/12    變壓器
blum    P87.0634-013-A3-EC/ 10m PURST/ 32-1/ F=500/ BL102 201306649    激光器
Blum-Novotest    P87.0634-015-NT-A1-2/32-1/F=Mitte BL103/V3 Z1-2    自動控制器
BLV    MHR150N    鹵鎢燈
BMI-AXELENT    W322-220140    鋼制柵欄
BMI-AXELENT    P11-230    鋼制柵欄
BMT    BMT 964 C Nr:080241536    臭氧分析儀
BOEHLER    UTP 665 2.5*250mm 51572 (237.6KG)    焊條
BOEHLER    UTP 665 3.2*350mm 14833(135kg)    焊條
BOEHLER    UTP 86FN 2.5*300mm 14901 (54kg)    焊條

WUT    RS232 line driver 80201總線驅動器秒報價

OFEL    N:90874 GIRI:1360 TIPO 132M2 4-16 HP:7 GIRI:33     異步電機

KNIEL    
BEINLICH    ZAD 1000636 ZPD 1-3.8-KP-L-F/R/VMAG    屏蔽泵
Magnet-Schultz    ASEW 001 D08壓力傳感器  

GELBAU    3004.5246U 452.46U Cat.3繼電器秒報價

OFEL    V132M2/4-16P 7HP    異步電機
SCHMALENBERGER    FZF 65-20/4 50HZ no:2008010527/10 motor:132M/4B-31 

IMB5 440-480V     泵

BOEHLER    UTP 665 3.2*350mm 14833 (108KG)    焊條
BOEHLER    UTP 665 2.5*250mm  51572（92.4kg）    焊條
BOEHLER    UTP 665 3.2*350mm  14833（90kg）    焊條
BOEHLER    UTP 86 FN 3.2*350mm 14902（39.2kg）    焊條
BOEHLER    UTP 86FN 2.5*300mm 14901  (31.5kg)    焊條
BOEHLER    UTP 665 3.2*350mm 14833（54kg）    焊條

DIN RAIL 3.0
DIN RAIL 16.7
DIN rail strip, Type T, 3 inches (75mm) or
16.7 (425mm).
20RM-16-DIN
19” rack-mount kit with DIN rail.
IMPORTANT: To prevent damage or errors from
grounded PCs and surges, Acromag strongly
recommends use of the USB-ISOLATOR when
configuring an XT1000 I/O module.
248-295-0880 ■ 248-624-9234 ■  ■ ■ 30765 Wixom Rd, Wixom, MI 48393 USA
Ethernet I/O: BusWorks
?  XT Series
Bulletin #8400-810b
Description
The XT1530 interfaces analog output and
discrete I/O signals between measurement and
control devices over Ethernet. Discrete I/O are
individually configurable for input or high-side
switched output operation.
Rugged construction, high density design, and
easy USB-to-PC/Windows setup combine for a
very effective I/O solution. These units are ideal
for remote monitoring, distributed control, or
SCADA applications.
Analog Output Ranges
0-20mA DC, 4-20mA DC
Discrete Input/Output Ranges
Input: 0-32V DC, TTL thresholds
Output: 0-32V DC, open-source, up to 250mA
Ethernet Communication
Modbus TCP/IP, Ethernet/IP, Profinet,
i2o ? peer-to-peer, 10/100Base-T(X)
PriorityChannel? device determinism
Power Requirement
12 to 32V DC (2.8W)
Key Features & BenefitsDAG    RF-07-70.04    主軸 EDAG    RF-07-70.05    主軸泵 
■ Multi-function, multi-channel stand alone
module is very economical
■ Easy setup with Windows software via USB
■ Dual Ethernet 10/100 ports with built-in switch
enables daisy-chain networking to reduce costs
■ . i2o technology for peer-to-peer communication
without a network controller
■ . Four analog output channels (16-bit DACs) to
drive remote instruments, controllers, recorders
■ Four discrete input/output channels support
loopback monitoring of output levels
■ Built-in 10K ohm pull-down resistors for use
with 2/3-wire sensors (contacts, proximity, TTL)
■ Configurable normal/reverse input logic
■ . Various diagnostics validate module operation
■ 1500V AC isolation (between I/O, power, and
network ports) and surge/transient protection
■ Slim 22.5mm housing with pluggable terminals
■ Supports bussed/rail and redundant power
■ -40°C to +60°C wide temperature operation
■ CE and UL/cUL Class 1 Div 2 Zone 2 approvals
4 analog current outputs, 4 discrete I/O channels ◆ Modbus TCP/IP, Ethernet/IP, Profinet, or i2o communication
XT1530  Ethernet Multi-Function Analog Output & Digital I/O Modules
99.0
(3.90)
114.5
(4.51)
22.5
(0.89)
DIMENSIONS ARE IN MILLIMETERS (INCHES)
XT153x SIMPLIFIED DIAGRAM
ISOLATED
NETWORK PORTS
ETHERNET
SWITCH
ISOLATED
POWER
16-BIT
D/A
DIN
DOUT
DIN
DOUT
μC
ANALOG
OUTPUT
x4
x4
16-BIT
D/A
DISCRETE
I/O
ANALOG OUTPUT EXAMPLES
DC CURRENT OUTPUT
CH
+
–
RTN
0-550 ohms
0-20mA
4-20mA
OUTPUT
LOAD
DISCRETE INPUT EXAMPLES
DISCRETE OUTPUT EXAMPLES
LOGIC (TTL) VOLTAGE ON/OFFDAG    RF-07-70.04    主軸 EDAG    RF-07-70.05    主軸泵 
TTL
V<0.8V
LOW
V>2.0V
HIGH
*OPTIONAL
Rlim
V
DI/O
RTN
DI/O
RTN
2-32V DC
N.C.
+
OFF (0)
ON (1)
ACTIVE-HIGH OUTPUT
OUTPUT SOURCES
CURRENT
LAMP
+
6-32V DC
DI/O
EXC+
RTN
LAMP CONTROL
USB
Configured
BusWorks XT software (download free from www.acromag。。ｃｏｍ) allows you to configure I/O modules offline with
USB, save the file, and download settings into units later, at your convenience.
248-295-0880 ■ 248-624-9234 ■  ■ ■ 30765 Wixom Rd, Wixom, MI 48393 USA
All trademarks are property of their respective owners. Copyright ? Acromag, Inc. 2014. Data subject to change without notice. Printed in USA 10/2014
Ethernet I/O: BusWorks
?  XT Series
XT1530  Ethernet Multi-Function Analog Output & Digital I/O Modules
Performance Specifications
■ USB Interface
USB Connector
Type: USB Mini-B type socket, 5-pin.
Data rate: 12Mbps. USB v1.1 and 2.0 compatible.
Maximum cable length: 5.0 meters.
USB Transient Protection
Transient voltage suppression on power and data lines.DAG    RF-07-70.04    主軸 EDAG    RF-07-70.05    主軸泵 
Driver
Not required. Uses Windows HID drivers.
■ Analog Output
Configuration
4 output channels, each with a 16-bit D/A converter.
Output Type
0-20mA DC or 4-20mA DC, configurable by channel.
Accuracy
Better than ±0.1% of span.
Output Excitation
Separate inputs for 12V (10-15V) and 24V (20-28V)
power sources. Diode-coupled to support redundancy.
■ Discrete Input
Input Type
4 active-high, buffered inputs, with a common
connection. Inputs are tied in tandem to output drains
for optional loopback monitoring of output state.
Input Signal Voltage Range
0 to 32V DC.
Input Current
280μA, typical at 32V DC.
Input Signal Threshold
1.7V DC typical with100mV of hysteresis.
Input Resistance
10K ohms, typical.
Input Response Time
10ms, nominal.
■ Discrete Output
Output Type
4 open-source, smart, p-channel mosfet switches
with a common drain connection. Provides high-side
(sourcing) switching between the load and return.
Output Signal Voltage Range
0 to 32V DC. 6-32V excitation source required.
Output “ON” Resistance
0.5 ohms typical, 1.0 ohms maximum.
Output “ON” Current Range
0 to 250mA DC, continuous (up to 1A total for all 4
channels combined).
Output Response Time
10ms, nominal.
■ Ethernet Communication
Protocols
Modbus TCP/IP, i2o peer-to-peer, Ethernet/IP, or
Profinet depending on model number.
Ethernet Communication Controller
Innovasic RapID? Platform with PriorityChannel? for
determinism at the device regardless of network load.
Modbus TCP/IP (slave)
Port 502 reserved. Supports up to 10 sockets.
i2o Peer-to-Peer (master/slave)
Can map 4-channel input groups to output groups at
two destination IP addresses. Timed or change-of-state
updates. Supports GPRS/GSM systems.
Ethernet/IP (adapter)
Supports 16 connections. EDS file on website.
Profinet (server)
Supports 1 connection. GSDML file on website.
Connectors
Two shielded 8-pin RJ-45 sockets, 10BaseT/100BaseTX.
Wiring
Auto-crossover for MDI or MDI-X.
IP Address
User-configurable. 192.168.1.100 default static IP address.
Data Rate
Auto-negotiated, 10Mbps or 100Mbps.
Compliance
IEEE 802.3, 802.3u, 802.3x.
■ Environmental
Operating and Storage Temperature
Operating: -40 to 60°C (-40 to 140°F).
Storage: -40 to 85°C (-40 to 185°F).
Relative Humidity
5 to 95% non-condensing.
Power Requirement
12 to 32V DC (110mA maximum @ 24V).
Isolation
I/O channels (as a group), network (each port), and
power circuits isolated from each other.
Peak: 1500V AC, ANSI/ISA-82.01-1988.
Continuous: 250V AC, 354V DC.
Electromagnetic Compatibility (EMC) Compliance
Radiated Emissions: BS EN 61000-6-4, CISPR 16.
RFI: BS EN 61000-6-2, IEC 61000-4-3.
Conducted RFI: BS EN 61000-6-2, IEC 61000-4-6.
ESD: BS EN 61000-6-2, IEC 61000-4-2.
EFT: BS EN 61000-6-2, IEC 61000-4-4.
Surge Immunity: BS EN 61000-6-2, IEC 61000-4-5.
Shock and Vibration Immunity
Vibration: 4g, per IEC 60068-2-64.
Shock: 25g, per IEC 60068-2-27.
Approvals
CE. UL/cUL Class I; Div. 2 Zone 2 approvals (pending)
■ Physical
General
General purpose plastic enclosure for mounting on
35mm “T-type” DIN rail.
Case Material
Self-extinguishing polyamide, UL94 V-0 rated, color
light gray. General purpose NEMA Type 1 enclosure.
Circuit Board
Military grade fire-retardant epoxy glass (IPC-4101/98).
I/O Connectors
Removable plug-in type terminal blocks rated for
12A/250V; AWG #26-12, stranded/solid copper wire.
Dimensions
Width = 22.5mm (0.9 inches), Length = 114.5mm
(4.51 inches), Depth = 99.0mm (3.90 inches).
Shipping Weight
0.5 pounds (0.22 Kg) packed.
Ordering Information
◆ Models
XT1531-000
Multi-function 4-ch analog current output, 4-ch digital
I/O module, Modbus/TCP and i2o protocol.
XT1532-000
Multi-function 4-ch analog current output, 4-ch digital
I/O module, Ethernet/IP protocol.
XT1533-000
Multi-function 4-ch analog current output, 4-ch digital
I/O module, Profinet protocol.
◆ Software
XT-SIP (recommend one kit per customer)
Software Interface Package. Includes software
(XT-CONFIG), isolator (USB-ISOLATOR), two USB cables
(4001-112, 4001-113), Ethernet cable (5035-360).
◆ Accessories
XTBUS-KIT
DIN rail bus power/excitation connector kit. Includes
one DIN rail bus connector (1005-070), one left-side
female connector terminal block (1005-220) and one
right side male connector terminal block (1005-221).
USB-ISOLATOR
USB-to-USB isolator, includes USB cable (4001-112).
IMPORTANT: To prevent damage or errors from
grounded PCs and surges, Acromag strongly
recommends use of the USB-ISOLATOR when
configuring an XT1000 I/O module.
248-295-0880 ■ 248-624-9234 ■  ■ ■ 30765 Wixom Rd, Wixom, MI 48393 USA
Ethernet I/O: BusWorks
?  XT Series
Bulletin #8400-807b
Description
The XT1540 interfaces analog output and
discrete I/O signals between measurement and
control devices over Ethernet. Discrete I/O are
individually configurable for input or high-side
switched output operation.
Rugged construction, high density design, and
easy USB-to-PC/Windows setup combine for a
very effective I/O solution. These units are ideal
for remote monitoring, distributed control, or
SCADA applications.
Analog Output Ranges
±5V, ±10V DC
Discrete Input/Output Ranges
Input: 0-32V DC, TTL thresholds
Output: 0-32V DC, open-source, up to 250mA
Ethernet Communication
Modbus TCP/IP, Ethernet/IP, Profinet,
i2o ? peer-to-peer, 10/100Base-T(X)
PriorityChannel? device determinism
Power Requirement
12 to 32V DC (2.8W)
Key Features & Benefits
■ Multi-function, multi-channel stand alone
module is very economical
■ Easy setup with Windows software via USB
■ Dual Ethernet 10/100 ports with built-in switch
enables daisy-chain networking to reduce costs
■ . i2o technology for peer-to-peer communication
without a network controller
■ . Eight analog output channels (16-bit DACs) to
drive remote instruments, controllers, recorders
■ Four discrete input/output channels support
loopback monitoring of output levels
■ Built-in 10K ohm pull-down resistors for use
with 2/3-wire sensors (contacts, proximity, TTL)
■ Configurable normal/reverse input logic
■ . Various diagnostics validate module operation
■ 1500V AC isolation (between I/O, power, and
network ports) and surge/transient protection
■ Slim 22.5mm housing with pluggable terminals
■ Supports bussed/rail and redundant power
■ -40°C to +65°C wide temperature operation
■ CE and UL/cUL Class 1 Div 2 Zone 2 approvals
8 analog voltage outputs, 4 discrete I/O channels ◆ Modbus TCP/IP, Ethernet/IP, Profinet, or i2o communication
XT1540  Ethernet Multi-Function Analog Output & Digital I/O Modules
99.0
(3.90)
114.5
(4.51)
22.5
(0.89)
DIMENSIONS ARE IN MILLIMETERS (INCHES)
XT154x SIMPLIFIED DIAGRAM
ISOLATED
NETWORK PORTS
ETHERNET
SWITCH
ISOLATED
POWER
16-BIT
D/A
DIN
DOUT
DIN
DOUT
μC
ANALOG
OUTPUT
x4
x8
16-BIT
D/A
DISCRETE
I/O
ANALOG OUTPUT EXAMPLES
CH
RTN
2mA max
OUTPUT
LOAD
DISCRETE INPUT EXAMPLES
DISCRETE OUTPUT EXAMPLES
LOGIC (TTL)
LAMP CONTROL
VOLTAGE ON/OFF
TTL
V<0.8V
LOW
V>2.0V
HIGH
*OPTIONAL
Rlim
V
DI/O
RTN
DI/O
RTN
2-32V DC
N.C.
+
LAMP
+
6-32V DC
DI/O
EXC+
RTN
±5V DC
±10V DC
DC VOLTAGE OUTPUT
OFF (0)
ON (1)
ACTIVE-HIGH OUTPUT
OUTPUT SOURCES
CURRENT
+
–
USB
Configured
BusWorks XT software (download free from www.acromag。。ｃｏｍ) allows you to configure I/O modules offline with
USB, save the file, and download settings into units later, at your convenience.
248-295-0880 ■ 248-624-9234 ■  ■ ■ 30765 Wixom Rd, Wixom, MI 48393 USA
All trademarks are property of their respective owners. Copyright ? Acromag, Inc. 2014. Data subject to change without notice. Printed in USA 10/2014
Ethernet I/O: BusWorks
?  XT Series
XT1540  Ethernet Multi-Function Analog Output & Digital I/O Modules
Performance Specifications
■ USB Interface
USB Connector
Type: USB Mini-B type socket, 5-pin.
Data rate: 12Mbps. USB v1.1 and 2.0 compatible.
Maximum cable length: 5.0 meters.
USB Transient Protection
Transient voltage suppression on power and data lines.
Driver
Not required. Uses Windows HID drivers.
■ Analog Output
Configuration
8 output channels, each with a 16-bit D/A converter.
Input Type
±10V or ±5V DC, configurable by channel.
Accuracy
Better than ±0.1% of span.
■ Discrete Input
Input Type
4 active-high, buffered inputs, with a common
connection. Inputs are tied in tandem to output drains
for optional loopback monitoring of output state.
Input Signal Voltage Range
0 to 32V DC.
Input Current
280μA, typical at 32V DC.
Input Signal Threshold
1.7V DC typical with100mV of hysteresis.
Input Resistance
10K ohms, typical.
Input Response Time
10ms, nominal.
■ Discrete Output
Output Type
4 open-source, smart, p-channel mosfet switches
with a common drain connection. Provides high-side
(sourcing) switching between the load and return.
Output Signal Voltage Range
0 to 32V DC. 6-32V excitation source required.
Output “ON” Resistance
0.5 ohms typical, 1.0 ohms maximum.
Output “ON” Current Range
0 to 250mA DC, continuous (up to 1A total for all 4
channels combined).
Output Response Time
10ms, nominal.
■ Ethernet Communication
Protocols
Modbus TCP/IP, i2o peer-to-peer, Ethernet/IP, or
Profinet depending on model number.
Ethernet Communication Controller
Innovasic RapID? Platform with PriorityChannel? for
determinism at the device regardless of network load.
Modbus TCP/IP (slave)
Port 502 reserved. Supports up to 10 sockets.
i2o Peer-to-Peer (master/slave)
Can map 4-channel input groups to output groups at
two destination IP addresses. Timed or change-of-state
updates. Supports GPRS/GSM systems.
Ethernet/IP (adapter)
Supports 16 connections. EDS file on website.
Profinet (server)
Supports 1 connection. GSDML file on website.
Connectors
Two shielded 8-pin RJ-45 sockets, 10BaseT/100BaseTX.
Wiring
Auto-crossover for MDI or MDI-X.
IP Address
User-configurable. 192.168.1.100 default static IP address.
Data Rate
Auto-negotiated, 10Mbps or 100Mbps.
Compliance
IEEE 802.3, 802.3u, 802.3x.
■ Environmental
Operating and Storage Temperature
Operating: -40 to 65°C (-40 to 149°F).
Storage: -40 to 85°C (-40 to 185°F).
Relative humidity
5 to 95% non-condensing.
Power Requirement
12 to 32V DC (110mA maximum @ 24V).
Isolation
I/O channels (as a group), network (each port), and
power circuits isolated from each other.
Peak: 1500V AC, ANSI/ISA-82.01-1988.
Continuous: 250V AC, 354V DC.
Electromagnetic Compatibility (EMC) Compliance
Radiated Emissions: BS EN 61000-6-4, CISPR 16.
RFI: BS EN 61000-6-2, IEC 61000-4-3.
Conducted RFI: BS EN 61000-6-2, IEC 61000-4-6.
ESD: BS EN 61000-6-2, IEC 61000-4-2.
EFT: BS EN 61000-6-2, IEC 61000-4-4.
Surge Immunity: BS EN 61000-6-2, IEC 61000-4-5.
Shock and Vibration Immunity
Vibration: 4g, per IEC 60068-2-64.
Shock: 25g, per IEC 60068-2-27.
Approvals
CE. UL/cUL Class I; Div. 2 Zone 2 approvals (pending)
■ Physical
General
General purpose plastic enclosure for mounting on
35mm “T-type” DIN rail.
Case Material
Self-extinguishing polyamide, UL94 V-0 rated, color
light gray. General purpose NEMA Type 1 enclosure.
Circuit Board
Military grade fire-retardant epoxy glass (IPC-4101/98).
I/O Connectors
Removable plug-in type terminal blocks rated for
12A/250V; AWG #26-12, stranded/solid copper wire.
Dimensions
Width = 22.5mm (0.9 inches), Length = 114.5mm
(4.51 inches), Depth = 99.0mm (3.90 inches).
Shipping Weight
0.5 pounds (0.22 Kg) packed.
Ordering Information
◆ Models
XT1541-000
Multi-function 8-ch analog voltage output, 4-ch digital
I/O module, Modbus/TCP and i2o protocol.
XT1542-000
Multi-function 8-ch analog voltage output, 4-ch digital
I/O module, Ethernet/IP protocol.
XT1543-000
Multi-function 8-ch voltage output, 4-ch digital I/O
module, Profinet protocol.
◆ Software
XT-SIP (recommend one kit per customer)
Software Interface Package. Includes software
(XT-CONFIG), isolator (USB-ISOLATOR), two USB cables
(4001-112, 4001-113), Ethernet cable (5035-360).
◆ Accessories
XTBUS-KIT
DIN rail bus power/excitation connector kit. Includes
one DIN rail bus connector (1005-070), one left-side
female connector terminal block (1005-220) and one
right side male connector terminal block (1005-221).
USB-ISOLATOR
USB-to-USB isolator, includes USB cable (4001-112).
IMPORTANT: To prevent damage or errors from
grounded PCs and surges, Acromag strongly
recommends use of the USB-ISOLATOR when
configuring an XT1000 I/O module.
248-295-0880 ■ 248-624-9234 ■  ■ ■ 30765 Wixom Rd, Wixom, MI 48393 USA
Ethernet I/O: BusWorks
?  XT Series
Bulletin #8400-659c
Description
The XTA-MRNO-6 is an interposing relay module
with six digital inputs and six mechanical relay
outputs. It is intended for use with BusWorks XT
Series discrete I/O or other digital output modules
for the purpose of driving high energy loads.
This module serves as an interim digital interface
to switch high voltage devices at high currents
based on digital logic inputs. Each pair of output
contacts are individually isolated.
These modules are very easy to use. Removable
front-facing terminal blocks on the module’s
top and bottom greatly simplify field wiring.
Individidual channel LEDs indicate the output
state for convenient troubleshooting.
Rugged construction and high density design
combine for a very effective I/O solution. These
units are ideal for remote monitoring, distributed
control, or SCADA applications.
Input Ranges
4-32V digital logic (0V OFF, 4-32V ON)
Output Ranges
Relays drive up to 250V AC / 30V DC at 5A
Power Requirement
12 to 32V DC
Key Features & Benefits
■ Six buffered digital logic inputs
■ Six mechanical relay outputs
■ Normally open, sealed, Form A mechanical
relay contacts (SPST-NO)
■ Switches both AC and DC voltage loads
■ 1500V AC isolation (between each I/O channel
and power) and surge/transient protection
■ High-Density 22.5mm wide package with
pluggable, front-facing terminals
■ Individual LEDs for each channel