精品乱码一区内射人妻无码-亚洲中文AⅤ中文字幕在线-免费不卡国产福利在线观看-国产综合无码一区二区色蜜蜜

 
ATOS    QV-10/2    油壓傳動閥
ATOS    DHR20-P5-012/2521    油壓傳動閥
ATOS    DP-2154    油壓傳動閥
ATOS    DPHI-3713-SP-667-24VDC    油壓傳動閥
ATOS    DKZOR-A-173-S5 40    油壓傳動閥
ATOS    QV-10/2 WG    油壓傳動閥
ATOS    DLHZO-T-040-L71    油壓傳動閥
1
Centrifugal Fans
double inlet with direct drive
backwardcurved true airfoil blades
Issue 1.4
September 2013
A
ηe = Pu(s) / Pe(d) · Cc
ηm ηT ηr
ηe
P
e(d) Pe Pu(s)
C
c
2013 58 58 61 37 42
2015 62 61 64 44 49
ηe = Pu(s) / Pe
Depending on the model of the fan, the efficiency grade “N” set in
accordance with the ErP Directive must be achieved from 2013 and
2015 respectively.
The efficiency grade designates a parameter in the calculation
of the target energy efficiency of a fan depending on the electric
input power when operating at the optimal energy efficiency point.
The figure of parameter “N” corresponds to the target energy
efficiency with a power of 10 kW.
To make the selection easier for our customers, we offer
complete systems as defined by the ErP Directive!
In order to compare the systems, the total efficiency ηe of the fan
without speed regulation is considered.
If the system has speed regulation, it will be taken into account with
the “part load compensation factor” Cc (see below):
without speed regulation: Cc = 1
with speed regulation Ped ≥ 5 kW: Cc = 1.04ATOS    QV-10/2    油壓傳動閥
with speed regulation Ped < 5 kW: Cc = -0.03 ln(Ped) + 1.088
In order to take the speed regulation into account via the part load
compensation factor Cc, the following mathematical losses arise
in accordance with the formula prescribed by ErP for the following
typical motor powers:
Ped = 4.00 kW: Cc = 1.05 (5 %)
Ped = 2.20 kW: Cc = 1.06 (6 %)
Ped = 0.75 kW: Cc = 1.10 (10 %)
Efficiency grade “N” to ErP-Directive
P
ed = Input power of speed regulator when operating at the optimal energy efficiency point
C
c = part load compensation factor
Complete systems by Nicotra Gebhardt
Nicotra Gebhardt can supply complete systems in all product
categories which meet the ErP requirements. We offer highly efficient
fan systems
with matching components and “high efficiency drives” –
belt and direct drive.
with integrated or external control to regulate speed.
with IEC standard motors (IE2) or internal rotor motors with
brushless DC technology.
and with AC external rotor motors or brushless DC external
rotor motors.
Building blocks for best values
Thanks to the decades-long experience of Nicotra Gebhardt all the
components of our fans contribute to their high performance.
Impellers and blades are optimised for turbulence and therefore
particularly efficient. An example: With the latest development,
the RLM Evo impeller, the free-running centrifugal fans of
Nicotra Gebhardt achieve system efficiency grades never reached
before.
In addition, the brushless DC drives which Nicotra Gebhardt
offers for its direct drive fans improve the system efficiency grades.ATOS    QV-10/2    油壓傳動閥
The fan technology of Nicotra Gebhardt delivers highly
efficient systems for all applications.
Year
Centrifugal fans
with backward curved blades
without
housing
static
with
housing
static total
Centrifugal fans with forward
curved blades
with
housing
static total
The overall picture will decide
ηe = Total efficiency
P
u(s) = Fan gas power when operating at the optimal
energy efficiency point
P
e = Electric input power when operating at the
optimal energy efficiency point
B
6.000 m3/h
10.000 m3/h
18.000 m3/h
35.000 m3/h
100.000 m3/h
200.000 m3/h
40 °C
60 °C
80 °CATOS    QV-10/2    油壓傳動閥
ATEX
RZM RZP RZA
P P P P P P P P
≤ 0280
P
≥ 0315
P
P P P P P P P
P P P P P P P P P P P P P
≤ 1000
P
≥ 1120
P
ErP 2015 ErP 2015 ErP 2015
Flow rate Media
temperature
Speed
control
Impeller Casing
material
Inlet
type
Voltage
Brushless-DC
External Inverter
Forward curved blades
galvanised sheet steel
Backward curved blades
coated steel
Galvanised steel
Coated steel
Single inlet
Double inlet
ErP status
2
proSELECTA II
ErP 2015 ErP 2015 ErP 2015
proSELECTA II is a technical selection program that allows you to
configure your own individually designed fan. It provides you with
the opportunity to choose from the entire range of fan types and
their associated options.
Simple and reliable selection
The result from proSELECTA II is the provision of all the technical
data for your fan, including sound level data, dimension
specifications and accessories. Apart from that, as a registered
user, your purchase prices are provided. Additionally fully
dimensioned drawings in dxf format are available, which can be
downloaded and transferred straight into your CAD system.
So that you can be sure. Models and options that are technically
not permissible, are automatically excluded in proSELECTA II.
So there is no chance that you will configure a “wrong” device
option.
You can register as a proSELECTA II user with us, which enables
us to offer you faster order processing. What this means for you is:
The complete configuration of your fan with its associated system
accessories and belt drive layout.
The possibility to produce fans that operate via a frequency
inverter.
The option of saving your own fan configuration on our server.
The opportunity to modify your saved configuration, even over the
phone to your Nicotra Gebhardt representative.
Nicotra Gebhardt technologies like ...
Automated manufacture of compact scroll and impeller with forward curved blades Own motor production for optimal tuniung
of motor and fan!
ErP status
3
Fittings RZM RZP RZA
Accessories
Technical
Description
High performance centrifugal fans RZA rotavent
double inlet,
with built-in, low-slip external rotor motor,
made of galvanised sheet steel or welded and coated,
with multi position feet and connecting flange at discharge;
Impeller with true aerofoil blades, welded and painted – system rotavent
High performance centrifugal fans RZP rotavent
double inlet,
with built-in, brushless DC external rotor motor and external commutation unit,
made of galvanised sheet steel;
with multi position feet and connecting flange at discharge;
Impeller with true aerofoil blades, welded and painted – system rotavent
High performance centrifugal fans RZM rotavent
double inlet,
fan with directly coupled motor fitted on pedestal and base frame,
made of galvanised sheet steel with heavy duty reinforced side frame,
connecting flange at discharge,
Impeller with true aerofoil blades, welded and painted – system rotavent
Fittings / Accessories
complete system accessories
fittings and options
Technical Description
Descriptions
Operating limits
Notes
4
ηe(s)
ηe(s)d
2013 2015
A, C
0.125 ≤ P ≤ 10
58 61
10 < P ≤ 500
B, D
0.125 ≤ P ≤ 10
61 64
10 < P ≤ 500
ηm ηr
P
ed Pe Pu(s)
C
c
The RZA rotavent serie
Economic, quiet and compact.
Through the combination of two pioneering technologies - the aerodynamics of the
rotavent impeller combined with energy efficient integral motors, Nicotra Gebhardt
has developed a series of controllable direct drive centrifugal fans setting new
standards for economy and quiet operation.
Your benefits:
A highly efficient system through the use of energy optimised components: fans,
motors and frequency inverters, operating together in harmony.
high efficiency
low energy costs
low noise
compact and maintenance free fans
flexible in its operation
Highest system performance and best energy efficiency
System efficiency
The given System Efficiency is the efficiency of the whole system and includes the
individual efficiencies of the component Fan – Motor – Frequency inverter.
ErP conformity
Depending on the model of the fan, the efficiency grade "N" set in accordance with
the ErP Directive must be achieved from 2013 and 2015 respectively.
The efficiency grade designates a parameter in the calculation of the target energy
efficiency of a fan depending on the electric input power when operating at the
optimal energy efficiency point. The figure of parameter "N" corresponds to the target
energy efficiency with a power of 10 kW.
Efficiency grade "N" to ErP Directive
Centrifugal fans with backward curved blades with housing
Year
static
total
Measurement
category
Efficiency
category
Efficiency grade
"N"
Power range P
Frequency [kW]
inverter
Motor Impeller
ηtarget = 4.56 · ln(Ped) - 10.5 + 61
ηtarget = 4.56 · ln(P) - 10.5 + N
ηtarget = 1.10 · ln(P) - 2.60 + N
ηtarget = 4.56 · ln(P) - 10.5 + N
ηtarget = 1.10 · ln(P) - 2.60 + N
Target energy efficiency
Calculation example for fan type: RZA 11-0355-4D
Measurement category / Efficiency category = B / TOTAL
Power range at optimum Pe = 3.6 kW (<10 kW)
Efficiency grade according to ErP Directive N2015 = 64
Calculation of the ErP energy efficiency ηtarget required 2015:
ηtarget = 4.56 · ln(3.6) - 10.5 + 64 ηtarget ≈ 59.3 %
Fan energy efficiency ηe:
System efficiency (total) by proSELECTA II ηe ≈ 62.7 %
Calculation of the Fan efficiency grade "NF":
N
F = 62.7 - [4.56 · ln(3.6)] + 10.5 NF = 67.4
Result: ηe 60.9 % > ηtarget 59.3 % resp. NF 67.4 > N2015 64
The energy efficiency of the fan surpasses the requirements of the ErP for 2015.
A technical data list according to ErP-REGULATION 327/2011/EU of all fans is
available at the end of this chapter "RZA".
Make use of our technical selection program
proSELECTA II. You receive all technical data for your
fan, easy–quick–reliable.
5
RZA 11-0225/-0560
The compact pioneering technology
Optimal aerodynamics
Low turbulance velocity for both inlet and discharge due to the
large free cross section and minimal flow restraint of the impeller, an
example of aerodynamics and performance of the rotavent.
Acoustics
Reduction of high frequency noise levels is just one of the advantages
of the rotavent, together with optimised motors and frequency
inverters.
Minimal sound levels due to low blade passing frequencies from the
optimised impeller geometry of the rotavent. The impeller has obliquely
inclined blades with trailing edges, and the throat plate is inclined
opposingly.
High efficiencies
Nicotra Gebhardt fans of the RZA rotavent range are operating at high
efficiency in wide area of the fan curve.
Your benefits:
negligible sensitivity to built in disturbances
minor pressure loss with free discharge operation
smaller, yet greater energy performance
Your benefits:
reduced size and costs of attenuation and silencers
Your Benefits:
low running costs
high efficiency
The high value and precisely manufactured components of rotavent, manufactured with most modern machinery for demanding tolerance
standards, are the basis for a product range satisfying highest quality requirements.
The motors
The motors are designed for high efficiencies with frequency inverter control, with inbuilt
PTC-thermistors and aerodynamically optimised.
Benefits:
improved economical operation
high safety standard
optimised motor protection
Lock formed scroll made of galvanised steel sheet, equipped with multi-position bolted
brackets and discharge flange.
High performance impeller with backward curved true aerofoil blades, welded and coated.
The vibration-free
motor suspension
The anti-vibration system, specially developped for this application, ensure smooth running
of the unit whithout transmission of vibration to other parts of the installation or to the
building.
The easy
connection through easy access to the metal connection box fitted to motor shaft.
The trouble-free
speed regulation
from 0 to 100 % by an efficient frequency inverter.
Benefits:
high flexibility
easy adaptation to varying operational conditions
high efficiency at part load
Version Description Figure
6
RZA 11-0225
2000
1000
600
400
200
100
40
Pa
500
300
800
60
50
80
1500
150
1200
120
2000 3000 4000 m3/h
psF
1000 1200 1500
3000
2600
2300
2000
1800
1600
N
1/min 110
91
80
69
62
55
f
Hz
qV
0.15 0.2
500 600 800
m3/s
qV
0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
ηesd (Nmax)
20
30
41 %
44
45
40
44
81
72
69
78
75
L
WA6;7
84 dB
P
S
0.3
0.4
0.6
0.5
0.15
0.2
kW
63 125 250 500 1000 2000 4000 8000 Hz
≤ 1.4 qVopt -9 -8 -4 -3 -4 -7 -12 -17 dB
> 1.4 qVopt -11 -12 -6 -4 -4 -6 -12 -21 dB
63 125 250 500 1000 2000 4000 8000 Hz
≤ 1.4 qVopt -10 -8 -5 -1 -5 -9 -16 -26 dB
> 1.4 qVopt -12 -12 -8 -1 -5 -8 -15 -27 dB
Direct driven centrifugal fans / RZA / Technical Data
Density of media 1.15 kg/m3.
Tolerance class 2 according to DIN 24166.
Measured in installation A according to ISO 5901 (unducted).
Technical Data
Determination of the Octave level
Inlet side
Discharge side Relative sound power level LWrel6 at octave band correction factors fc.
Relative sound power level LWrel7 at octave band correction factors fc.
Duty point
Duty point
Normal operation area
7
RZA 11-0225
RZA 11- V Hz kW kW A Hz 1/min °C kg
0225-4D 3 400 87 0.60 0.87 1.6 110 3000 40 17
RZA 11- V Hz kW A Hz 1/min 1/min °C kg
0225-4D-50 * 400 50 0.12 0.55 110 1460 3000 40 17
0225-4D-60 * 460 60 0.17 0.52 110 1740 3000 40 17
399
26
191 212
447
270
220
26
26
255
468
194 100
130
348
10.5 322
348
322
286
2 x 100
244
10
288
30
176
176
ZKF 15-1717 ZKE 15-1717 ZSG 03-0225
RZA 11- ESH 22- MM420 3AC 400V 6SE6400- ZBD 01-
0225-4D ESH 22-075-32 MM420 3AC 400V 0.75KW EMV B 6SE6400-3CC00-4AD3 ZBD 01-0506-A
RZA 11- ESH 22- MM420 3AC 400V 6SE6400- ZBD 01-
0225-4D-50 ESH 22-075-32 – – ZBD 01-0506-A
0225-4D-60 ESH 22-075-32 – – ZBD 01-0506-A
LG 0 LG 90 LG 180 LG 270 RD 0 RD 90 RD 180 RD 270
Direct driven centrifugal fans / RZA / Technical Data
Technical Data
Technical Data
Frequency Inverter Parameters
The following curves show the fans operating with frequency control:
The nominal frequency of the inverter is 87 Hz, i.e. the input frequency
400 V is increased to 87 Hz. The performance curves plot speed/frequency against volume and pressure, and the total efficiency
(ηinverter × ηmotor × ηimpeller) is expressed as a parabola.
The set up parameters for each inverter are provided in the accompanying literature.
Calculations formula
P
S = psF × qV / ηsS
L
Wokt7 = LWA6/7 + LWrel7
L
Wokt6 = LWA6/7 + LWrel6
3 = Stepless speed controllable via frequency converter
* = No speed control available
Dimensions in mm, Subject to change.
Accessories
Speed
control
Nominal
voltage
Nominal frequency
Nominal motor
power
Max. power
consumption
Max. output
current (FC)
Max. operating
frequency Max. fan speed
Max. media
temperature Weight
Speed
control
Nominal
voltage
Mains
frequency
Max. power
consumption
Nominal
motor
current
Max. operating
frequency
Nominal motor
speed Max. fan speed
Max. media
temperature Weight
Isolator
(metal casing)
Frequency Inverter Unit MM420
for 3~
Line Choke
for 3~ Anti Vibration Rubber Buffers
8
RZA 11-0250
63 125 250 500 1000 2000 4000 8000 Hz
≤ 1.4 qVopt -9 -8 -4 -3 -4 -7 -12 -17 dB
> 1.4 qVopt -11 -12 -6 -4 -4 -6 -12 -21 dB
63 125 250 500 1000 2000 4000 8000 Hz
≤ 1.4 qVopt -10 -8 -5 -1 -5 -9 -16 -26 dB
> 1.4 qVopt -12 -12 -8 -1 -5 -8 -15 -27 dB
2000
1000
600
400
200
100
40
Pa
500
300
800
60
50
80
1500
150
1200
120
2000 3000 4000 m3/h
psF
1000 1200 1500 5000
3010
2600
2300
2000
1700
1500
N
1/min 110
90
79
69
59
52
f
Hz
qV
2.0
600 800
m3/s
qV
0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
ηesd (Nmax)
20
40
42 % 46
48
30
46
80
83
86
68
71
77
74 L
WA6;7
89 dB
P
S
0.3
0.2
1.0
0.4
0.6
0.5
0.8
kW
Direct driven centrifugal fans / RZA / Technical Data
Density of media 1.15 kg/m3.
Tolerance class 2 according to DIN 24166.
Measured in installation A according to ISO 5901 (unducted).
Technical Data
Determination of the Octave level
Inlet side
Discharge side Relative sound power level LWrel6 at octave band correction factors fc.
Relative sound power level LWrel7 at octave band correction factors fc.
Duty point
Duty point
Normal operation area
9
RZA 11-0250
RZA 11- V Hz kW kW A Hz 1/min °C kg
0250-4D 3 400 87 0.95 1.4 2.5 110 3010 40 21
RZA 11- V Hz kW A Hz 1/min 1/min °C kg
0250-4D-50 * 400 50 0.21 0.90 110 1460 3010 40 21
0250-4D-60 * 460 60 0.29 0.87 110 1740 3010 40 21
438
28
206 234
490
270
220
28
28
282
511
210 110
130
381
10.5 356
382
356
320
3 x 100
244
10
322
30
194
ZKF 15-1818 ZKE 15-1818 ZSG 03-0250
LG 0 LG 90 LG 180 LG 270 RD 0 RD 90 RD 180 RD 270
RZA 11- ESH 22- MM420 3AC 400V 6SE6400- ZBD 01-
0250-4D ESH 22-075-32 MM420 3AC 400V 1.10KW EMV B 6SE6400-3CC00-4AD3 ZBD 01-0506-A
RZA 11- ESH 22- MM420 3AC 400V 6SE6400- ZBD 01-
0250-4D-50 ESH 22-075-32 – – ZBD 01-0506-A
0250-4D-60 ESH 22-075-32 – – ZBD 01-0506-A
Direct driven centrifugal fans / RZA / Technical Data
Technical Data
Technical Data
Frequency Inverter Parameters
The following curves show the fans operating with frequency control:
The nominal frequency of the inverter is 87 Hz, i.e. the input frequency
400 V is increased to 87 Hz. The performance curves plot speed/frequency against volume and pressure, and the total efficiency
(ηinverter × ηmotor × ηimpeller) is expressed as a parabola.
The set up parameters for each inverter are provided in the accompanying literature.
Calculations formula
P
S = psF × qV / ηsS
L
Wokt7 = LWA6/7 + LWrel7
L
Wokt6 = LWA6/7 + LWrel6
3 = Stepless speed controllable via frequency converter
* = No speed control available
Dimensions in mm, Subject to change.
Accessories
Speed
control
Nominal
voltage
Nominal frequency
Nominal motor
power
Max. power
consumption
Max. output
current (FC)
Max. operating
frequency Max. fan speed
Max. media
temperature Weight
Speed
control
Nominal
voltage
Mains
frequency
Max. power
consumption
Nominal
motor
current
Max. operating
frequency
Nominal motor
speed Max. fan speed
Max. media
temperature Weight
Isolator
(metal casing)
Frequency Inverter Unit MM420
for 3~
Line Choke
for 3~ Anti Vibration Rubber Buffers
10
RZA 11-0280
63 125 250 500 1000 2000 4000 8000 Hz
≤ 1.4 qVopt -7 -3 -2 -1 -4 -10 -15 -21 dB
> 1.4 qVopt -12 -7 -5 -1 -5 -9 -13 -21 dB
63 125 250 500 1000 2000 4000 8000 Hz
≤ 1.4 qVopt -4 -8 -6 -1 -5 -11 -15 -24 dB
> 1.4 qVopt -8 -12 -8 -1 -5 -9 -13 -23 dB
2000
1000
600
400
200
100
40
Pa
500
300
800
60
50
80
1500
150
1200
120
2000 3000 4000 m3/h
psF
1000 1200 1500 5000
2900
2700
2300
1900
1700
1500
N
1/min 100
93
79
65
58
51
f
Hz
qV
1.5
800
m3/s
qV
0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
6000
1400 48
2100 72
2500 86
ηesd (Nmax)
20
40
44 %
50
52
30
50
81
84
87
72
78
75 L
WA6;7
90
93 dB
P
S
0.3
1.3
1.0
0.4
0.6
0.5
0.8
kW
Direct driven centrifugal fans / RZA / Technical Data
Density of media 1.15 kg/m3.
Tolerance class 2 according to DIN 24166.
Measured in installation A according to ISO 5901 (unducted).
Technical Data
Determination of the Octave level
Inlet side
Discharge side Relative sound power level LWrel6 at octave band correction factors fc.
Relative sound power level LWrel7 at octave band correction factors fc.
Duty point
Duty point
Normal operation area
11
RZA 11-0280
RZA 11- V Hz kW kW A Hz 1/min °C kg
0280-4D 3 400 87 1.50 1.9 3.7 100 2900 40 29
RZA 11- V Hz kW A Hz 1/min 1/min °C kg
0280-4D-50 * 400 50 0.33 1.36 100 1480 2900 40 29
0280-4D-60 * 460 60 0.49 1.35 100 1770 2900 40 29
484
30
226 263
548
270
220
30
30
315
570
236 123
130
421
10.5 395
421
395
358
3 x 100
286
10
361
30
216
222
ZKF 15-1919 ZKE 15-1919 ZSG 03-0280
LG 0 LG 90 LG 180 LG 270 RD 0 RD 90 RD 180 RD 270
RZA 11- ESH 22- MM420 3AC 400V 6SE6400- ZBD 01-
0280-4D ESH 22-075-32 MM420 3AC 400V 1.50KW EMV B 6SE6400-3CC00-6AD3 ZBD 01-0506-A
RZA 11- ESH 22- MM420 3AC 400V 6SE6400- ZBD 01-
0280-4D-50 ESH 22-075-32 – – ZBD 01-0506-A
0280-4D-60 ESH 22-075-32 – – ZBD 01-0506-A
Direct driven centrifugal fans / RZA / Technical Data
Technical Data
Technical Data
Frequency Inverter Parameters
The following curves show the fans operating with frequency control:
The nominal frequency of the inverter is 87 Hz, i.e. the input frequency
400 V is increased to 87 Hz. The performance curves plot speed/frequency against volume and pressure, and the total efficiency
(ηinverter × ηmotor × ηimpeller) is expressed as a parabola.
The set up parameters for each inverter are provided in the accompanying literature.
Calculations formula
P
S = psF × qV / ηsS
L
Wokt7 = LWA6/7 + LWrel7
L
Wokt6 = LWA6/7 + LWrel6
3 = Stepless speed controllable via frequency converter
* = No speed control available
Dimensions in mm, Subject to change.
Accessories
Speed
control
Nominal
voltage
Nominal frequency
Nominal motor
power
Max. power
consumption
Max. output
current (FC)
Max. operating
frequency Max. fan speed
Max. media
temperature Weight
Speed
control
Nominal
voltage
Mains
frequency
Max. power
consumption
Nominal
motor
current
Max. operating
frequency
Nominal motor
speed Max. fan speed
Max. media
temperature Weight
Isolator
(metal casing)
Frequency Inverter Unit MM420
for 3~
Line Choke
for 3~ Anti Vibration Rubber Buffers
12
RZA 11-0315
63 125 250 500 1000 2000 4000 8000 Hz
≤ 1.4 qVopt -7 -3 -2 -1 -4 -10 -15 -21 dB
> 1.4 qVopt -12 -7 -5 -1 -5 -9 -13 -21 dB
63 125 250 500 1000 2000 4000 8000 Hz
≤ 1.4 qVopt -4 -8 -6 -1 -5 -11 -15 -24 dB
> 1.4 qVopt -8 -12 -8 -1 -5 -9 -13 -23 dB
2000
1000
600
400
200
100
40
Pa
500
300
800
60
50
80
1500
150
1200
120
2000 3000 4000 m3/h
psF
1000 1200 1500 5000 6000 8000
2750
2300
2100
1900
1700
1500
1300
N
1/min 95
86
79
72
65
58
52
f
Hz
qV
2500
45
m3/s
qV
0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.5 2.0
83
86
89
71
74
80
77 L
WA6;7
92 dB
P
S
0.3
2.0
1.0
0.4
0.6
0.5
0.8
kW
1.5
2.5 η
esd (Nmax)
20
40
47 %
52
54
30
50
Direct driven centrifugal fans / RZA / Technical Data
Density of media 1.15 kg/m3.
Tolerance class 2 according to DIN 24166.
Measured in installation A according to ISO 5901 (unducted).
Technical Data
Determination of the Octave level
Inlet side
Discharge side Relative sound power level LWrel6 at octave band correction factors fc.
Relative sound power level LWrel7 at octave band correction factors fc.
Duty point
Duty point
Normal operation area
13
RZA 11-0315
RZA 11- V Hz kW kW A Hz 1/min °C kg
0315-4D 3 400 87 2.20 2.9 5.3 95 2750 40 36
RZA 11- V Hz kW A Hz 1/min 1/min °C kg
0315-4D-50 * 400 50 0.54 1.89 95 1480 2750 40 36
0315-4D-50 * 460 60 0.82 1.94 95 1770 2750 40 36
536
33
247 294
603
270
220
33
33
355
624
253 139
130
463
10.5 438
464
438
401
3 x 100
286
10
404
30
242
ZKF 15-2020 ZKE 15-2020 ZSG 03-0315
LG 0 LG 90 LG 180 LG 270 RD 0 RD 90 RD 180 RD 270
RZA 11- ESH 22- MM420 3AC 400V 6SE6400- ZBD 01-
0315-4D ESH 22-075-32 MM420 3AC 400V 2.20KW EMV B 6SE6400-3CC01-0BD3 ZBD 01-0506-A
RZA 11- ESH 22- MM420 3AC 400V 6SE6400- ZBD 01-
0315-4D-50 ESH 22-075-32 – – ZBD 01-0506-A
0315-4D-60 ESH 22-075-32 – – ZBD 01-0506-A
Direct driven centrifugal fans / RZA / Technical Data
Technical Data
Technical Data
Frequency Inverter Parameters
The following curves show the fans operating with frequency control:
The nominal frequency of the inverter is 87 Hz, i.e. the input frequency
400 V is increased to 87 Hz. The performance curves plot speed/frequency against volume and pressure, and the total efficiency
(ηinverter × ηmotor × ηimpeller) is expressed as a parabola.
The set up parameters for each inverter are provided in the accompanying literature.
Calculations formula
P
S = psF × qV / ηsS
L
Wokt7 = LWA6/7 + LWrel7
L
Wokt6 = LWA6/7 + LWrel6
3 = Stepless speed controllable via frequency converter
* = No speed control available
Dimensions in mm, Subject to change.
Accessories
Speed
control
Nominal
voltage
Nominal frequency
Nominal motor
power
Max. power
consumption
Max. output
current (FC)
Max. operating
frequency Max. fan speed
Max. media
temperature Weight
Speed
control
Nominal
voltage
Mains
frequency
Max. power
consumption
Nominal
motor
current
Max. operating
frequency
Nominal motor
speed Max. fan speed
Max. media
temperature Weight
Isolator
(metal casing)
Frequency Inverter Unit MM420
for 3~
Line Choke
for 3~ Anti Vibration Rubber Buffers
14
RZA 11-0355
63 125 250 500 1000 2000 4000 8000 Hz
≤ 1.4 qVopt -9 -2 -3 0 -7 -9 -15 -25 dB
> 1.4 qVopt -12 -6 -6 0 -7 -7 -13 -25 dB
63 125 250 500 1000 2000 4000 8000 Hz
≤ 1.4 qVopt -5 -7 -5 -1 -6 -9 -16 -26 dB
> 1.4 qVopt -7 -11 -8 -1 -6 -8 -13 -26 dB
2000
1000
600
400
200
100
40
Pa
500
300
800
60
50
80
1500
150
1200
120
2000 3000 4000 m3/h
psF
1500 5000 6000 8000
2620
2200
2000
1800
1600
1400
1200
N
1/min 90
83
76
69
62
55
48
f
Hz
qV
2400
42
m3/s
qV
0.5 0.6 0.7 0.8 0.9 1.0 1.5 2.0 3.0
10000
ηesd (Nmax)
30
50
53 %
56
58
40
56
20
83
86
89
71
74
80
77
L
WA6;7
95 dB
92
P
S
2.7
2.0
1.0
0.4
0.6
0.5
0.8
kW
1.5
Direct driven centrifugal fans / RZA / Technical Data
Density of media 1.15 kg/m3.
Tolerance class 2 according to DIN 24166.
Measured in installation A according to ISO 5901 (unducted).
Technical Data
Determination of the Octave level
Inlet side
Discharge side Relative sound power level LWrel6 at octave band correction factors fc.
Relative sound power level LWrel7 at octave band correction factors fc.
Duty point
Duty point
Normal operation area
15
RZA 11-0355
RZA 11- V Hz kW kW A Hz 1/min °C kg
0355-4D 3 400 87 3.60 4.6 7.9 90 2620 40 48
RZA 11- V Hz kW A Hz 1/min 1/min °C kg
0355-4D-50 * 400 50 0.79 2.20 90 1480 2620 40 48
0355-4D-60 * 460 60 1.3 2.40 90 1770 2620 40 48
598
36
273 329
668
270
220
36
36
297
689
275 157
130
513
10.5 487
513
487
450
4 x 100
334
10
453
30
271
275
ZKF 15-2121 ZKE 15-2121 ZSG 03-0355
LG 0 LG 90 LG 180 LG 270 RD 0 RD 90 RD 180 RD 270
RZA 11- ESH 22- MM420 3AC 400V 6SE6400- ZBD 01-
0355-4D ESH 22-075-32 MM420 3AC 400V 4.00KW EMV B 6SE6400-3CC01-4BD3 ZBD 01-0606-A
RZA 11- ESH 22- MM420 3AC 400V 6SE6400- ZBD 01-
0355-4D-50 ESH 22-075-32 – – ZBD 01-0606-A
0355-4D-60 ESH 22-075-32 – – ZBD 01-0606-A
Direct driven centrifugal fans / RZA / Technical Data
Technical Data
Technical Data
Frequency Inverter Parameters
The following curves show the fans operating with frequency control:
The nominal frequency of the inverter is 87 Hz, i.e. the input frequency
400 V is increased to 87 Hz. The performance curves plot speed/frequency against volume and pressure, and the total efficiency
(ηinverter × ηmotor × ηimpeller) is expressed as a parabola.
The set up parameters for each inverter are provided in the accompanying literature.
Calculations formula
P
S = psF × qV / ηsS
L
Wokt7 = LWA6/7 + LWrel7
L
Wokt6 = LWA6/7 + LWrel6
3 = Stepless speed controllable via frequency converter
* = No speed control available
Dimensions in mm, Subject to change.
Accessories
Speed
control
Nominal
voltage
Nominal frequency
Nominal motor
power
Max. power
consumption
Max. output
current (FC)
Max. operating
frequency Max. fan speed
Max. media
temperature Weight
Speed
control
Nominal
voltage
Mains
frequency
Max. power
consumption
Nominal
motor
current
Max. operating
frequency
Nominal motor
speed Max. fan speed
Max. media
temperature Weight
Isolator
(metal casing)
Frequency Inverter Unit MM420
for 3~
Line Choke
for 3~ Anti Vibration Rubber Buffers
16
RZA 11-0400
63 125 250 500 1000 2000 4000 8000 Hz
≤ 1.4 qVopt -9 -2 -3 0 -7 -9 -15 -25 dB
> 1.4 qVopt -12 -6 -6 0 -7 -7 -13 -25 dB
63 125 250 500 1000 2000 4000 8000 Hz
≤ 1.4 qVopt -5 -7 -5 -1 -6 -9 -16 -26 dB
> 1.4 qVopt -7 -11 -8 -1 -6 -8 -13 -26 dB
2000
1000
600
400
200
100
40
Pa
500
300
800
60
50
80
1500
150
1200
120
2000 3000 4000 m3/h
psF
5000 6000 8000
2330
2000
1800
1600
1400
1300
1200
N
1/min 80
76
69
62
55
48
45
f
Hz
qV
2200
41
m3/s
qV
0.6 0.7 0.8 0.9 1.0 1.5 2.0
10000 12000
3.0
1100 38
15000
4.0
83
86
89
74
80
77
L
WA6;7
95 dB
92
P
S
3.0
2.0
1.0
2.5
0.6
4.0
0.8
kW
1.5
ηesd (Nmax)
30
50
53 %
58
60
40
58
20
Direct driven centrifugal fans / RZA / Technical Data
Density of media 1.15 kg/m3.
Tolerance class 2 according to DIN 24166.
Measured in installation A according to ISO 5901 (unducted).
Technical Data
Determination of the Octave level
Inlet side
Discharge side Relative sound power level LWrel6 at octave band correction factors fc.
Relative sound power level LWrel7 at octave band correction factors fc.
Duty point
Duty point
Normal operation area
17
RZA 11-0400
RZA 11- V Hz kW kW A Hz 1/min °C kg
0400-4D 3 400 87 4.40 5.6 12 80 2330 40 68
RZA 11- V Hz kW A Hz 1/min 1/min °C kg
0400-4D-50 * 400 50 1.46 3.50 80 1480 2330 40 68
0400-4D-60 * 460 60 2.41 4.20 80 1770 2330 40 68
667
40
302 369
751
385
320
40
40
445
773
310 179
130
596
14 546
567
541
504
4 x 100
334
10
507
30
304
ZKF 15-2222 ZKE 15-2222 ZSG 01-0400
LG 0 LG 90 LG 180 LG 270 RD 0 RD 90 RD 180 RD 270
RZA 11- ESH 22- MM420 3AC 400V 6SE6400- ZBD 01-
0400-4D ESH 22-075-32 MM420 3AC 400V 5.50KW EMV B 6SE6400-3CC02-2CD3 ZBD 01-0606-A
RZA 11- ESH 22- MM420 3AC 400V 6SE6400- ZBD 01-
0400-4D-50 ESH 22-075-32 – – ZBD 01-0606-A
0400-4D-60 ESH 22-075-32 – – ZBD 01-0606-A
Direct driven centrifugal fans / RZA / Technical Data
Technical Data
Technical Data
Frequency Inverter Parameters
The following curves show the fans operating with frequency control:
The nominal frequency of the inverter is 87 Hz, i.e. the input frequency
400 V is increased to 87 Hz. The performance curves plot speed/frequency against volume and pressure, and the total efficiency
(ηinverter × ηmotor × ηimpeller) is expressed as a parabola.
The set up parameters for each inverter are provided in the accompanying literature.
Calculations formula
P
S = psF × qV / ηsS
L
Wokt7 = LWA6/7 + LWrel7
L
Wokt6 = LWA6/7 + LWrel6
3 = Stepless speed controllable via frequency converter
* = No speed control available
Dimensions in mm, Subject to change.
Accessories
Speed
control
Nominal
voltage
Nominal frequency
Nominal motor
power
Max. power
consumption
Max. output
current (FC)
Max. operating
frequency Max. fan speed
Max. media
temperature Weight
Speed
control
Nominal
voltage
Mains
frequency
Max. power
consumption
Nominal
motor
current
Max. operating
frequency
Nominal motor
speed Max. fan speed
Max. media
temperature Weight
Isolator
(metal casing)
Frequency Inverter Unit MM420
for 3~
Line Choke
for 3~ Anti Vibration Rubber Buffers
18
RZA 11-0450
63 125 250 500 1000 2000 4000 8000 Hz
≤ 1.4 qVopt -2 1 2 0 -7 -12 -16 -22 dB
> 1.4 qVopt -4 -2 1 0 -7 -10 -16 -24 dB
63 125 250 500 1000 2000 4000 8000 Hz
≤ 1.4 qVopt -3 -5 -3 -1 -6 -16 -19 -27 dB
> 1.4 qVopt -9 -8 -3 -1 -5 -14 -19 -29 dB
2000
1000
600
400
200
100
40
Pa
500
300
800
60
50
80
1500
150
1200
120
3000 4000 m3/h
psF
5000 6000 8000
2040
1800
1600
1400
1200
1100
N
1/min 70
62
55
48
41
f
Hz
qV
38
m3/s
qV
0.7 0.8 0.9 1.0 1.5 2.0
10000 12000
3.0
1000 35
15000
4.0
20000
6.0
ηesd (Nmax)
30
50
54 % 59
61
40
58
20
82
85
88
73
79
76
L
WA6;7
94 dB
91
P
S
3.0
2.0
1.0
4.0 5.0
0.8
kW
1.5
Direct driven centrifugal fans / RZA / Technical Data
Density of media 1.15 kg/m3.
Tolerance class 2 according to DIN 24166.
Measured in installation A according to ISO 5901 (unducted).
Technical Data
Determination of the Octave level
Inlet side
Discharge side Relative sound power level LWrel6 at octave band correction factors fc.
Relative sound power level LWrel7 at octave band correction factors fc.
Duty point
Duty point
Normal operation area
19
RZA 11-0450
RZA 11- V Hz kW kW A Hz 1/min °C kg
0450-4D 3 400 87 5.20 6.6 15.8 70 2040 40 85
RZA 11- V Hz kW A Hz 1/min 1/min °C kg
0450-4D-50 * 400 50 2.47 5.70 70 1480 2040 40 85
0450-4D-60 * 460 60 4.15 6.80 70 1770 2040 40 85
750
44
342 413
842
385
320
44
44
499
868
346 202
130
660
14 612
639
605
566
4 x 112
400
12
569
35
341
340
ZKF 15-2424 ZKE 15-2424 ZSG 01-0450
LG 0 LG 90 LG 180 LG 270 RD 0 RD 90 RD 180 RD 270
RZA 11- ESH 22- MM420 3AC 400V 6SE6400- ZBD 01-
0450-4D ESH 22-075-32 MM420 3AC 400V 7.50KW EMV B 6SE6400-3CC02-2CD3 ZBD 01-1010-A
RZA 11- ESH 22- MM420 3AC 400V 6SE6400- ZBD 01-
0450-4D-50 ESH 22-075-32 – – ZBD 01-1010-A
0450-4D-60 ESH 22-075-32 – – ZBD 01-1010-A
Direct driven centrifugal fans / RZA / Technical Data
Technical Data
Technical Data
Frequency Inverter Parameters
The following curves show the fans operating with frequency control:
The nominal frequency of the inverter is 87 Hz, i.e. the input frequency
400 V is increased to 87 Hz. The performance curves plot speed/frequency against volume and pressure, and the total efficiency
(ηinverter × ηmotor × ηimpeller) is expressed as a parabola.
The set up parameters for each inverter are provided in the accompanying literature.
Calculations formula
P
S = psF × qV / ηsS
L
Wokt7 = LWA6/7 + LWrel7
L
Wokt6 = LWA6/7 + LWrel6
3 = Stepless speed controllable via frequency converter
* = No speed control available
Dimensions in mm, Subject to change.
Accessories
Speed
control
Nominal
voltage
Nominal frequency
Nominal motor
power
Max. power
consumption
Max. output
current (FC)
Max. operating
frequency Max. fan speed
Max. media
temperature Weight
Speed
control
Nominal
voltage
Mains
frequency
Max. power
consumption
Nominal
motor
current
Max. operating
frequency
Nominal motor
speed Max. fan speed
Max. media
temperature Weight
Isolator
(metal casing)
Frequency Inverter Unit MM420
for 3~
Line Choke
for 3~ Anti Vibration Rubber Buffers
20
RZA 11-0500
63 125 250 500 1000 2000 4000 8000 Hz
≤ 1.4 qVopt -2 1 2 0 -7 -12 -16 -22 dB
> 1.4 qVopt -4 -2 1 0 -7 -10 -16 -24 dB
63 125 250 500 1000 2000 4000 8000 Hz
≤ 1.4 qVopt -3 -5 -3 -1 -6 -16 -19 -27 dB
> 1.4 qVopt -9 -8 -3 -1 -5 -14 -19 -29 dB
2000
1000
600
400
200
100
40
Pa
500
300
800
60
50
80
1500
150
1200
120
3000 4000 m3/h
psF
5000 6000 8000
1770
1600
1400
1300
1200
1000
N
1/min 90
81
71
66
61
f
Hz
qV
51
m3/s
qV
0.9 1.0 1.5 2.0
10000 12000
3.0
900 45
15000
4.0
20000
5.0 6.0 7.0
1100 56
81
84
87
72
78
75
L
WA6;7
93 dB
90
ηesd (Nmax)
30
50
53 % 59
61
40
58
20
P
S
3.0
2.0
1.0
4.0
5.0
kW
1.5
Direct driven centrifugal fans / RZA / Technical Data
Density of media 1.15 kg/m3.
Tolerance class 2 according to DIN 24166.
Measured in installation A according to ISO 5901 (unducted).
Technical Data
Determination of the Octave level
Inlet side
Discharge side Relative sound power level LWrel6 at octave band correction factors fc.
Relative sound power level LWrel7 at octave band correction factors fc.
Duty point
Duty point
Normal operation area
21
RZA 11-0500
RZA 11- V Hz kW kW A Hz 1/min °C kg
0500-6D 3 400 87 5.90 7.3 15.9 90 1770 40 103
RZA 11- V Hz kW A Hz 1/min 1/min °C kg
0500-6D * 400 50 1.39 5.70 90 990 1770 40 103
0500-6D-60 * 460 60 2.34 5.80 90 1180 1770 40 103
821
52
370 457
929
385
320
52
52
553
956
381 221
130
729
14 680
708
674
635
5 x 112
400
12
638
35
376
ZKF 15-2525 ZKE 15-2525 ZSG 01-0500
LG 0 LG 90 LG 180 LG 270 RD 0 RD 90 RD 180 RD 270
RZA 11- ESH 22- MM420 3AC 400V 6SE6400- ZBD 01-
0500-6D ESH 22-075-32 MM420 3AC 400V 7.50KW EMV B 6SE6400-3CC02-2CD3 ZBD 01-1010-A
RZA 11- ESH 22- MM420 3AC 400V 6SE6400- ZBD 01-
0500-6D-50 ESH 22-075-32 – – ZBD 01-1010-A
0500-6D-60 ESH 22-075-32 – – ZBD 01-1010-A
Direct driven centrifugal fans / RZA / Technical Data
Technical Data
Technical Data
Frequency Inverter Parameters
The following curves show the fans operating with frequency control:
The nominal frequency of the inverter is 87 Hz, i.e. the input frequency
400 V is increased to 87 Hz. The performance curves plot speed/frequency against volume and pressure, and the total efficiency
(ηinverter × ηmotor × ηimpeller) is expressed as a parabola.
The set up parameters for each inverter are provided in the accompanying literature.
Calculations formula
P
S = psF × qV / ηsS
L
Wokt7 = LWA6/7 + LWrel7
L
Wokt6 = LWA6/7 + LWrel6
3 = Stepless speed controllable via frequency converter
* = No speed control available
Dimensions in mm, Subject to change.
Accessories
Speed
control
Nominal
voltage
Nominal frequency
Nominal motor
power
Max. power
consumption
Max. output
current (FC)
Max. operating
frequency Max. fan speed
Max. media
temperature Weight
Speed
control
Nominal
voltage
Mains
frequency
Max. power
consumption
Nominal
motor
current
Max. operating
frequency
Nominal motor
speed Max. fan speed
Max. media
temperature Weight
Isolator
(metal casing)
Frequency Inverter Unit MM420
for 3~
Line Choke
for 3~ Anti Vibration Rubber Buffers
22
RZA 11-0560
63 125 250 500 1000 2000 4000 8000 Hz
≤ 1.4 qVopt -2 1 2 0 -7 -12 -16 -22 dB
> 1.4 qVopt -4 -2 1 0 -7 -10 -16 -24 dB
63 125 250 500 1000 2000 4000 8000 Hz
≤ 1.4 qVopt -17 0 1 -1 -6 -16 -19 -27 dB
> 1.4 qVopt -9 -3 1 -1 -5 -14 -19 -29 dB
2000
1000
600
400
200
100
40
Pa
500
300
800
60
50
80
1500
150
1200
120
4000 m3/h
psF
5000 6000 8000
1660
1500
1300
1200
1100
900
N
1/min 87
79
68
63
58
f
Hz
qV
47
m3/s
qV
1.5 2.0
10000 12000
3.0
800 42
15000
4.0
20000
5.0 6.0 7.0
1000 52
30000
8.0 9.0
ηesd (Nmax)
30
50
52 % 58
60
40
56
20
81
84
87
93
78
75
L
WA6;7
96 dB
90
P
S
3.0
2.0
6.0
4.0
5.0
kW
1.5
8.0
Direct driven centrifugal fans / RZA / Technical Data
Density of media 1.15 kg/m3.
Tolerance class 2 according to DIN 24166.
Measured in installation A according to ISO 5901 (unducted).
Technical Data
Determination of the Octave level
Inlet side
Discharge side Relative sound power level LWrel6 at octave band correction factors fc.
Relative sound power level LWrel7 at octave band correction factors fc.
Duty point
Duty point
Normal operation area
23
RZA 11-0560
RZA 11- V Hz kW kW A Hz 1/min °C kg
0560-6D 3 400 87 9.20 10.9 21.2 87 1660 40 154
RZA 11- V Hz kW A Hz 1/min 1/min °C kg
0560-6D-50 * 400 50 2.3 9.10 87 980 1660 40 154
0560-6D-60 * 460 60 3.7 9.20 87 1160 1660 40 154
914
59
409 512
1044
600
500
59
59
620
1071
431 247
130
805
14 756
785
751
712
6 x 112
462
12
715
35
421
400
ZKF 15-2727 ZKE 15-2727 ZSG 01-0560
LG 0 LG 90 LG 180 LG 270 RD 0 RD 90 RD 180 RD 270
RZA 11- ESH 22- MM420 3AC 400V 6SE6400- ZBD 01-
0560-6D ESH 22-0110-32 MM420 3AC 400V 11.0KW EMV B 6SE6400-3CC03-5CD3 ZBD 01-1010-A
RZA 11- ESH 22- MM420 3AC 400V 6SE6400- ZBD 01-
0560-6D-50 ESH 22-0110-32 – – ZBD 01-1010-A
0560-6D-60 ESH 22-0110-32 – – ZBD 01-1010-A
Direct driven centrifugal fans / RZA / Technical Data
Technical Data
Technical Data
Frequency Inverter Parameters
The following curves show the fans operating with frequency control:
The nominal frequency of the inverter is 87 Hz, i.e. the input frequency
400 V is increased to 87 Hz. The performance curves plot speed/frequency against volume and pressure, and the total efficiency
(ηinverter × ηmotor × ηimpeller) is expressed as a parabola.
The set up parameters for each inverter are provided in the accompanying literature.
Calculations formula
P
S = psF × qV / ηsS
L
Wokt7 = LWA6/7 + LWrel7
L
Wokt6 = LWA6/7 + LWrel6
3 = Stepless speed controllable via frequency converter
* = No speed control available
Dimensions in mm, Subject to change.
Accessories
Speed
control
Nominal
voltage
Nominal frequency
Nominal motor
power
Max. power
consumption
Max. output
current (FC)
Max. operating
frequency Max. fan speed
Max. media
temperature Weight
Speed
control
Nominal
voltage
Mains
frequency
Max. power
consumption
Nominal
motor
current
Max. operating
frequency
Nominal motor
speed Max. fan speed
Max. media
temperature Weight
Isolator
(metal casing)
Frequency Inverter Unit MM420
for 3~
Line Choke
for 3~ Anti Vibration Rubber Buffers
24
RZA 11-0225/-0560
Direct driven centrifugal fans / RZA / Ausschreibungstexte
Fan type RZA 11-
Casing position (anticlockwise) LG
Volume flow qV m3/h
Static pressure psF Pa
Air density at fan inlet r1 kg/m3
Air temperature t °C
Power consumption system Pe (PS) kW
Output current Inverter IA A
System efficiency ηesd %
Operating frequency f Hz
Max. operating frequency fmax Hz
Weight m kg
Specifications
High performance centrifugal fan RZA rotavent
double inlet, direct driven with an LowSlip external rotor motor.
Lap jointed scroll of galvanised sheet steel with discharge flange and bolt on
multipositioned feet.
High performance impeller with 11 backward curved blades (size 0225/-0280), with
12 hollow section true aerofoil blades (size 0315/-0560), inclined obliquely to the shaft
axis, welded in position and coated.
Throat plate inclined obliquely in opposition to blade inclination.
Inlet cones matched to the impeller to reduce entry losses.
Impeller fixed to the rotor of the LowSlip motor in IP54 type protection, compley
maintenance free, statically and dynamically balanced to DIN ISO 1940, vibration
isolated mounting, ready to connect with a metal connetction box.
The motor efficiency is optimised with the frequency inverters, speed control going
from 0 to 100 %. The capability of maintaining a constant operational speed.
Performance data in precision class 2 according to DIN 24166.
Ventilator Daten
Fittings / Accessories
Drain plug R1/2"
Inspection door
Corrosion protection S40
Volumeter IMV13

Discharge flange
Discahrge flexible connection
Inlet guards
Rubber AVM

Frequency inverter unit
3 phase line reactor
Difference pressure sensor
Universal control device
Isolator
25
Pos. 1
Pos. 3
Pos. 2
RZA 11- RZA 11-
0225/-0315 210 × 210 0355/-0560 310 × 310
RZA 11- ηe [%] "N" 2013 2015 Pe [kW] qV [m3/h] pF [Pa] N [1/min]
0225-4D 54.7 B 68.7 61 64 0.46 1748 523 2695 1.005
0250-4D 57.1 B 68.9 61 64 0.75 2361 655 2700 1.007
0280-4D 58.2 B 66.1 61 64 1.77 4061 914 2900 1.009
0315-4D 59.1 B 65.5 61 64 2.48 4884 1082 2750 1.011
0355-4D 62.7 B 67.4 61 64 3.60 6679 1218 2620 1.012
0400-4D 68.0 B 73.5 61 64 3.05 7683 973 2030 1.010
0450-4D 65.6 B 68.1 61 64 5.76 10753 1265 2040 1.013
0500-6D 66.0 B 68.0 61 64 6.49 12861 1200 1770 1.012
0560-6D 64.2 B 64.4 61 64 9.57 16748 1322 1660 1.013
Accessories
All options and accessories must be specified separay.
Please take the technical data and dimensions from the corresponding page of the
catalogue.
Drain Plug
If the fan is installed outside, or if conveying a medium containing humidty, condensation of water may accumulate inside the fan scroll.
For extraction of this water a condense water drain has to be installed at the lowest
point of the scroll. The drain will be provided with a thread R1/2" for connecting it to
a piping.
At order please indicate the required casing position.
Inspection Door
For the purposes of maintenance and cleaning there is an opening, which can be
securely closed by means of an access door, in the fan casing.
As it can only be opened with a tool, the access door complies with safety and
accident prevention regulations. Additional securing with locking bars can be supplied
on request.
The site and orientation of the inspection opening depends on the casing position.
The position should be specified when ordering according to the following diagram:
e.g. Access door, Pos. 2.
Dimensions in mm, subject to change.
Fittings / Accessories
Direct driven centrifugal fans / RZA / Accessories
Overall
efficiency
Measurement
category
Efficiency
category
achieved efficiency grade at
optimum energy
efficiency
required
efficiency
grade acc. to
ErP since
Speed
control (VSD)
Rated motor power at optimum
energy efficiency
Flow rate at optimum energy
efficiency
Pressure at optimum energy
efficiency
Speed at optimum energy
efficiency
"specific
ratio"
TOTAL
TOTAL
TOTAL
TOTAL
TOTAL
TOTAL
TOTAL
TOTAL
TOTAL
must be
installed
must be
installed
must be
installed
must be
installed
must be
installed
must be
installed
must be
installed
must be
installed
must be
installed
Technical Data according to ErP-REGULATION 327/2011/EU
Corrosion Protection Systems
Nicotra Gebhardt fans are treated with high quality corrosion protection as standard.
Under extreme operating conditions, however, additional corrosion protection is
advisable.
Corrosion protection - Class S40
Degreasing, ironphosphating
Powder coating
Layer thickness ≥40 μm, Colour RAL 7039
Wet lacquering
Layer thickness ≥40 μm (primer + lacquer finish), Colour RAL 7039
Technical Data
26
H
G
A E F
K
ZBD ZBD A E F G H K
01-0405A* 01-0405C* 20 25 16 M6 M6 6.5
03-0503A* 03-0503C* 25 15 11 M6 M6 6.5
01-0504A* 01-0504C* 25 20 11 M6 M6 6.5
03-0806A* 03-0806C* 40 30 21 M8 M8 9.5
03-1007A* 03-1007C* 50 34 26.5 M10 M10 10.5
03-1510A* 03-1510C* 75 50 39 M12 M12 12.5
02-2008A* 02-2008C* 100 40 44 M16 M16 16.5
Fittings / Accessories
Anti Vibration Rubber Buffers
Anti Vibration Mounts (AVM) are designed to prevent noise and vibrations being
transmitted through the base of the fan. AVMs should be mounted beneath the fan
base frame so the weight and spring deflections are evenly distributed.
They should not be mounted symmetrically around the centre of gravity of the system
when idle, because a counter force is induced into the system by the pressure
created by the working fan.
It is difficult for the manufacturer to establish the position of the AV mounts to suit all
types of application.
Vibration and noise insulation can also be improved by ensuring that the fan is connected to its external environment by a flexible coupling.
Rubber buffers
for both vibration and noise insulation at fan speeds above 1400 rpm or 850 rpm
Rubber buffers
for noise insulation only at fan speeds under 800 rpm or 1700 rpm
Dimensions in mm, subject to change.
* A = for U-profile; C = for CC-profile
Protection guards
The fans are designed for installation in equipment and as standard are not equipped
with protective guards.
They should not be put into operation before all protective devices are fitted
and connected!
Protective measures must be carried out as set out in DIN EN ISO 12100 "Safety of
machinery - Basic concepts, general principles for design".
If the application of the fan allows free access to the inlet and discharge apertures,
safety devices must be put in place on the fan in accordance with DIN EN ISO 13857!
Suitable safety guards are available as an optional extra.
Flanges and Flexible Connections
Made from galvanized or painted steel, to connect ducts and system components to
the fan outlet side.
Connecting piece with elastic intermediate section for the vibration or impact-noise
decoupled connection of the fan to the system or unit. Made out of two connecting
flanges with elastic intermediate section.
Temperature range / Application
Standard up to +80 °C
ATEX max. +60 °C
27
pin
pin
RZA 11- K [m2s/h] RZA 11- K [m2s/h] RZA 11- K [m2s/h]
0225 112 0315 180 0450 330
0250 125 0355 215 0500 410
0280 160 0400 255 0560 550
qV = K × — × 2 ?pDü
?
0
4000
8000
12000
16000
20000
24000
28000
0 1000 2000
pFI
Pa
0280
0315
0355
0400
0450
0500
m3/h
qV
500 1500
RZA 11-
32000
0560
0250
0225
Fittings / Accessories
Volumeter
With the flow measuring device it is possible to easilymeasure / monitor the flow rate
after the fan is installed. A pressure tapping at a predetermined position on the inlet
cone is provided whereby the differential pressure in relation to the static pressure is
measured in front ofthe inlet cone in a static atmosphere.
volume flow qV [m3/h]
calibration factor K [m2s/h]
density of media r [kg/m3]
pressure difference at cone DpDü [Pa]
In order to calculate the flow rate, a calibrating factor "K" is required. This factor is
determined by comparativemeasurement on a standard test rig.
Calibration factors
Standard-calibration faktor K
Where fans are built into a plenum, the pressure difference between the static pressure in the inlet side plenum and the pressure on the inlet cone is to bemeasured.
It must be ensured that the static pressureto be measured in front of the inlet cone
is not tampered by dynamic pressure fractions. It is often recommended to arrange
a ring of points on the wall facing the outlet side as illustrated in the sketch. When
using the K-factors specified below, a minimum clearance of 0.5×D between the inlet
cone of the fan and the side wall of the plenum must be maintained. Indentations that
obstruct the flow to the cone canlead to faults when measuring the flow rate. In the
event that the differential pressure is fed via a pressure sensor, the signal can also be
used for regulating purposes.
Measuring connector in inlet cone
Hose pipe to connecting piece in the side wall
Connecting piece (external diameter of 6mm) for the pressure
measurement
Volume flow determination
With the represented chart and a measured difference pressure at the nozzle can
streamed determined become the volumes in the indicated density. The chart can be
used also to the determination of the needed pressure area of a manometer. In addition the difference pressure is determined at the nozzle for the maximally appearing
volume current with the chart.
Electrical accessories (Frequency converter, Differential pressure sensor, Universal
control device, Isolator) see chapter "Accessories".
Electrical accessories
28
f
BP =—
N × z
60
Direct driven centrifugal fans / RZA / Accessories
Description
Performance data
The performance curves of the fans are determined at the plenum test rig according
to ISO 5801.
The curves show the pressure increase for a fan with free discharge as a function of
the flow rate. The diagramme scale is a double logarithmical net.
The throttle curves (system resistance parabolas) are then represented by straight
lines.
All fan curve and related data are based on a reference density of r1 = 1.15 kg/m3 for
the conveyed medium at fan intake.
For a medium density r1 different to this standard value the fan curves and the motor
load, as a consequence, will be changing.
The efficiencies and power consumption given in the performance curves include all
losses due to the motor and the frequency converter unit.
The data are established for a fan with free discharge i.e. without duct connection at
the presurre side, installation A.
Sound
Sound measurement and analysis are carried out in accordance with DIN 45635-38
”Sound measurement at machines; fans”.
The sound data of the fan curves are given as “A” weighted sound power levels LWA.
The “A” weighted sound power level are identical for fan intake (LWA7) as well as for
fan discharge (LWA6).
An approximation of the “A” weighted sound pressure levels LpA7/LpA6 at a distance
of 1 m at fan Inlet or discharge may be obtained by subtracting 7 dB from the relative
“A” weighted sound power levels.
If should be noted that site acoustics, duct design, reverberation, natural frequencies
etc. can all influence noise to a greater or lesser extent.
For more accurate calculations to determine noise protection measures, the sound
power level in each octave band is of more value.
The noise correction data, in function of the fan speed and flow rate, are to be found
with the corresponding table on the fan curve page.
Inlet: LWfc7 = LWA6/7 + LWrel7
Discharge: LWfc6 = LWA6/7 + LWrel6
In some cases the noise level - calculated by this way - may in some cases be higher
than expected at the blade passing frequency.
Blade passing frequency
f
BP = Blade passing frequency in Hz
N = Fan speed in 1/min
z = No of blades ... sizes 0225/-0280 = 11
sizes 0315/-0560 = 12
Media
This range of fans are specially designed for use into air handling units (AHU) and
ventilation systems.
The centrifugal fans are ideal for conveying clean air. The allowed air temperature
comes from -20 °C to +40 °C.
Safety
The fans are designed for installation in equipment and as standard are not equipped
with protective guards.
They should not be put into operation before all protective devices are fitted
and connected!
Protective measures must be carried out as set out in DIN EN ISO 12100 "Safety of
machinery - Basic concepts, general principles for design".
If the application of the fan allows free access to the inlet and discharge apertures,
safety devices must be put in place on the fan in accordance with DIN EN ISO 13857!
Suitable safety guards are available as an optional extra.
29
V
400
230
50 87 Hz
Direct driven centrifugal fans / RZA / Description
Motors
The specially developed integral motors are designated as having protection class
IP54 and heat class F.
They are optimised to a high rate of efficiency, with speed that can be adjusted
between 0 and 100 % via the frequency inverter.
The motors are fitted with an easily accessible metal clamping box. To prevent
overloading, PTC are inserted in the windings of the motors. In conjunction with
PTC release equipment or a frequency inverter with PTC connection, effective motor
protection is guaranteed.
The motors ex works are in star connection (Y). When operating with a
frequency inverter, the links must be placed in delta connection (g) (see
wiring diagram).
Electric connection
All fans are delivered ready for connection. Electrical connection takes place in
accordance with the enclosed operating instructions and observing the relevant
applicable local regulations and directives. Every fan is accompanied by a connection
circuit diagram. You can also find the relevant circuit diagram online at:
www.nicotra-gebhardt。。ｃｏｍ.
Frequency inverter operation
Frequency inverter operation with a nominal voltage of 400 V the edge frequency of
87 Hz must be set. The motor must then be delta (g) connected.
The inverter exit voltage is a square function of the frequency and the voltagefre-quency-curve has a corresponding shape. In the case of direct mains (400 V)
operation the motor should be star (Y) connected.
If frequency inverters are allocated by the customer, then it must be ensured that the
voltage gradient of the frequency inverter does not exceed the figure of 500 V/μs
and the maximum peak voltage at the motor terminals is kept to 1200 V. Depending
on the frequency inverter employed and the length of cable between the frequency
inver-ter and the motor, additional units (such as motor choke, active sinus filter, for
examp-le) may be needed to ensure that the limits named above are kept to.
Non-compliance may lead to damage to the motor!
Description
30
ηe(s)
ηe(s)d
2013 2015
A, C
0.125 ≤ P ≤ 10
58 61
10 < P ≤ 500
B, D
0.125 ≤ P ≤ 10
61 64
10 < P ≤ 500
ηm ηr
P
ed Pe Pu(s)
C
c
N
F = ηe - [4.56 · ln(Pe)] + 10.5
Highest system performance and best energy efficiency
The RZP rotavent serie
Economic, quiet and compact.
Through the combination of two pioneering technologies - the aerodynamics of the
rotavent impeller combined with energy efficient brushless integral motors, Nicotra
Gebhardt has developed a series of controllable direct drive centrifugal fans setting
new standards for economy and quiet operation.
Your benefits:
a greater motor efficiency due to the elimination of all slip losses and marked
reduction in copper losses
a compact range of fans from using built-in brushless DC motors (no belt drives)
maintenance and wear free drive (no V-belts)
short payback time due to high energy saving, especially with long operating
periods
higher comfort levels through particularly low noise fans and motors
setting unrelated to mains frequency – same operating point for 50/60 Hz
problrm free speed control from 0 up to 100 %
reduced motor heat from higher motor efficiency – reduced energy expenditure for
the cooling systems
System efficiency
The given System Efficiency is the efficiency of the whole system and includes the
individual efficiencies of the component Fan – Motor – Control electronics.
ErP conformity
Depending on the model of the fan, the efficiency grade "N" set in accordance with
the ErP Directive must be achieved from 2013 and 2015 respectively.
The efficiency grade designates a parameter in the calculation of the target energy
efficiency of a fan depending on the electric input power when operating at the
optimal energy efficiency point. The figure of parameter "N" corresponds to the target
energy efficiency with a power of 10 kW.
Efficiency grade "N" to ErP Directive
Centrifugal fans with backward curved blades with housing
Year
static
total
Measurement
category
Efficiency
category
Efficiency grade
"N"
Power range P
Control [kW]
electronics
VSD
Motor Impeller
ηtarget = 4.56 · ln(P) - 10.5 + N
ηtarget = 1.10 · ln(P) - 2.60 + N
ηtarget = 4.56 · ln(P) - 10.5 + N
ηtarget = 1.10 · ln(P) - 2.60 + N
Target energy efficiency
Calculation example for fan type: RZP 11-0315-EC-51
Measurement category / Efficiency category = B / TOTAL
VSD power range at optimum Ped = 4.12 kW (<10 kW)
Efficiency grade according to ErP Directive N2015 = 64
Calculation of the ErP energy efficiency ηtarget required 2015:
ηtarget = 4.56 · ln(4.12) - 10.5 + 64 ηtarget ≈ 60.0 %
Fan energy efficiency ηe:
System efficiency (total) by proSELECTA II ηe ≈ 65.6 %
Calculation of the Fan efficiency grade "NF":
N
F = 65.6 - [4.56 · ln(4.12)] + 10.5 NF = 69.6
Result: ηe 65.6 % > ηtarget 60.0 % resp. NF 69.6 > N2015 64
The energy efficiency of the fan surpasses the requirements of the ErP for 2015.
A technical data list according to ErP-REGULATION 327/2011/EU of all fans is
available at the end of this chapter "RZP".
Make use of our technical selection program
proSELECTA II. You receive all technical data for your
fan, easy–quick–reliable.
ηtarget = 4.56 · ln(Ped) - 10.5 + 64
31
RZP 11-0200/-0400
The compact pioneering technology
optimal Aerodynamics
Low turbulance velocity for both inlet and discharge due to the large
free cross section and minimal flow restraint of the impeller, an example of aerodynamics and performance of the rotavent.
Acoustics
Reduction of high frequency noise levels is just one of the advantages
of the rotavent, together with optimised brushless integral motors.
Minimal sound levels due to low blade passing frequencies from the
optimised impeller geometry of the rotavent. The impeller has obliquely
inclined blades with trailing edges, and the throat plate is inclined
opposingly.
high efficiency
A 10% up to 20% better system efficiency is achieved in comparison
to similar performance data for voltage controllable fan systems.
Your benefits:
negligible sensitivity to built in disturbances
minor pressure loss with free discharge operation
smaller, yet greater energy performance
Your benefits:
reduced size and costs of attenuation and silencers
Your benefits:
low running costs
high efficiency
Die Produktvorteile des RZP
Die Hochwertigen und pr?zisen Baulemente des rotavent, gefertigt mit modernsten Einrichtungen und h?chster Wiederholgenauigkeit, bilden die
Basis für ein Produkt welches auch h?chsten Ansprüchen genügt:
Version Description Figure
The motors
The vibration free motor suspension
The trouble-free speed
regulation
Lock formed scroll made of galvanised steel sheet, equipped with multi-position bolted
brackets and discharge flange.
High performance impeller with backward curved true aerofoil blades, welded and coated.
A drive unit involving an electronically commutated motor differs from the DC motors of old
through it‘s lack of collector and carbon brushes. These subject to wear components have
been replaced in electronically commutated motors with maintenance free electronics.
The anti-vibration system, specially developped for this application, ensure smooth running
of the unit whithout transmission of vibration to other parts of the installation or to the building.
from 0 to 100 % by an efficient Control electronics system.
Benefits:
high flexibility
easy adaptation to varying operational conditions
high efficiency at part load
32
RZP 11-0200-EC-11
EKE 07-0065-5E-IM
2000
1000
600
400
200
100
40
Pa
500
300
800
60
50
80
1500
150
1200
120
2000 3000 m3/h
psF
1000 1500 2500
3300
3700
2900
2600
2300
2100
1900
N
1/min
qV
0.15 0.2
400 500 600 800
m3/s
qV
0.3 0.4 0.5 0.6 0.7 0.8 0.9
ηesd (Nmax)
30
20
40
45 %
50
52
46
50
81
72
69
66
78
75 L
WA7
84
87 dB
P
1S
0.3
0.4
0.6
0.5
0.1
0.2
kW
0.15
r1 = 1.15 kg/m3
63 125 250 500 1000 2000 4000 8000 Hz
≤2342 1/min 0.70–1.4 qVopt -7 -10 +4 -4 -5 -10 -22 -27 dB
>2342 1/min 0.70–1.4 qVopt -12 -15 -8 -4 -4 -7 -15 -24 dB
63 125 250 500 1000 2000 4000 8000 Hz
≤2342 1/min 0.70–1.4 qVopt -8 -5 +2 -2 -5 -12 -21 -34 dB
>2342 1/min 0.70–1.4 qVopt -11 -11 -9 0 -7 -9 -14 -29 dB
Direct driven centrifugal fans / RZP / Technical data
Technical data
Determination of the Octave level
Inlet side
Discharge side Relative sound power level LWrel6 at octave band correction factors fc.
Relative sound power level LWrel7 at octave band correction factors fc.
Duty point
Speed Duty point
Speed
Density of media 1.15 kg/m3.
Measured in installation A according to ISO 5801 (unducted).
Normal operation area
33
RZP 11-0200-EC-11
EKE 07-0065-5E-IM
RZP 11- ZBD
0200-EC-11 ZBD 01-0506-A
358
22
168 190
393
200
160
22
22
228
409
167 89
130
309
8 286
306
286
254
2 x 90
7
256
25
157
ZKF 15-1616 ZKE 15-1616 ZSG 03-0200
LG 0 LG 90 LG 180 LG 270 RD 0 RD 90 RD 180 RD 270
RZP 11- EKE 07- V HZ kW A 1/min °C ~kg
0200-EC-11 0065-5E-IM 230 1~ 50/60 0.66 2.8 3700 IP54 F 40 15
Direct driven centrifugal fans / RZP / Technical data
Technical data
Control
electronics Voltage Phases
Mains
frequency
Max. power
consumption
Max. current
consumption
Nominal
motor speed
Motor
protection
class
Motor
thermal class
Max. media
temperature Weight
Dimensions in mm, subject to change.
Accessories
Anti Vibration Rubber Buffers
The system efficiency ηesd is the efficiency of the whole system, Fan–Motor–Control
electronics.
Attention! The performance curves relates to the fan in combination with the given
Control electronics.
34
RZP 11-0225-EC-12
EKE 07-0065-5E-IM
2000
1000
600
400
200
100
40
Pa
500
300
800
60
50
80
1500
150
1200
120
2000 3000 m3/h
psF
1000 1500 2500
3200
3500
2900
2600
2300
2000
1800
N
1/min
qV
0.15 0.2
500 600 800 4000
m3/s
qV
0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
ηesd (Nmax)
30
20
40
49 %
53
55
50
54
80
74
71
68
77
L
WA7
83
86 dB
P
1S
0.3
0.4
0.6
0.5
0.8
0.2
kW
0.15
r1 = 1.15 kg/m3
63 125 250 500 1000 2000 4000 8000 Hz
≤2342 1/min 0.70–1.4 qVopt -7 -9 0 -5 -3 -9 -19 -27 dB
>2342 1/min 0.70–1.4 qVopt -12 -13 -8 -6 -3 -8 -13 -23 dB
63 125 250 500 1000 2000 4000 8000 Hz
≤2342 1/min 0.70–1.4 qVopt -9 -6 -2 -1 -5 -10 -20 -32 dB
>2342 1/min 0.70–1.4 qVopt -12 -10 -7 -2 -4 -7 -13 -26 dB
Direct driven centrifugal fans / RZP / Technical data
Technical data
Determination of the Octave level
Inlet side
Discharge side Relative sound power level LWrel6 at octave band correction factors fc.
Relative sound power level LWrel7 at octave band correction factors fc.
Duty point
Speed Duty point
Speed
Density of media 1.15 kg/m3.
Measured in installation A according to ISO 5801 (unducted).
Normal operation area
Please note coloured area!
N do not use in this area
35
RZP 11-0225-EC-12
EKE 07-0065-5E-IM
RZP 11- ZBD
0225-EC-12 ZBD 01-0506-A
399
26
191 212
447
270
220
26
26
255
468
194 100
130
348
10.5 322
348
322
286
2 x 100
180
10
288
30
176
180
ZKF 15-1717 ZKE 15-1717 ZSG 03-0225
LG 0 LG 90 LG 180 LG 270 RD 0 RD 90 RD 180 RD 270
RZP 11- EKE 07- V HZ kW A 1/min °C ~kg
0225-EC-12 0065-5E-IM 230 1~ 50/60 0.85 3.7 3400 IP54 F 40 20
Direct driven centrifugal fans / RZP / Technical data
Technical data
Dimensions in mm, subject to change.
Accessories
Anti Vibration Rubber Buffers
The system efficiency ηesd is the efficiency of the whole system, Fan–Motor–Control
electronics.
Attention! The performance curves relates to the fan in combination with the given
Control electronics.
Control
electronics Voltage Phases
Mains
frequency
Max. power
consumption
Max. current
consumption
Nominal
motor speed
Motor
protection
class
Motor
thermal class
Max. media
temperature Weight
36
RZP 11-0250-EC-12
EKE 07-0065-5E-IM
2000
1000
600
400
200
100
40
Pa
500
300
800
60
50
80
1500
150
1200
120
2000 3000 m3/h
psF
1000 1500 2500
2900
3200
2600
2300
2000
1800
1600
N
1/min
qV
0.2
600 800 4000 5000
m3/s
qV
0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.5
ηesd (Nmax)
30
20
40
50 %
55
57
50
55
81
72
69
78
75 L
WA7
84
87 dB
P
1S
0.3
0.4
0.6
0.5
0.8
1.0
0.2
kW
0.15
r1 = 1.15 kg/m3
63 125 250 500 1000 2000 4000 8000 Hz
≤2342 1/min 0.70–1.4 qVopt -5 -6 0 -4 -3 -10 -18 -28 dB
>2342 1/min 0.70–1.4 qVopt -9 -12 -7 -5 -3 -8 -12 -22 dB
63 125 250 500 1000 2000 4000 8000 Hz
≤2342 1/min 0.70–1.4 qVopt -9 -8 -1 -1 -5 -11 -21 -31 dB
>2342 1/min 0.70–1.4 qVopt -12 -11 -8 -1 -5 -8 -16 -27 dB
Direct driven centrifugal fans / RZP / Technical data
Technical data
Determination of the Octave level
Inlet side
Discharge side Relative sound power level LWrel6 at octave band correction factors fc.
Relative sound power level LWrel7 at octave band correction factors fc.
Duty point
Speed Duty point
Speed
Density of media 1.15 kg/m3.
Measured in installation A according to ISO 5801 (unducted).
Normal operation area
Please note coloured area!
N do not use in this area
37
RZP 11-0250-EC-12
EKE 07-0065-5E-IM
RZP 11- ZBD
0250-EC-12 ZBD 01-0506-A
438
28
206 234
490
270
220
28
28
282
511
210 110
130
381
10.5 356
382
356
320
3 x 100
200
10
322
30
194
200
ZKF 15-1818 ZKE 15-1818 ZSG 03-0250
LG 0 LG 90 LG 180 LG 270 RD 0 RD 90 RD 180 RD 270
RZP 11- EKE 07- V HZ kW A 1/min °C ~kg
0250-EC-12 0065-5E-IM 230 1~ 50/60 1.1 4.5 3100 IP54 F 40 22
Direct driven centrifugal fans / RZP / Technical data
Technical data
Dimensions in mm, subject to change.
Accessories
Anti Vibration Rubber Buffers
The system efficiency ηesd is the efficiency of the whole system, Fan–Motor–Control
electronics.
Attention! The performance curves relates to the fan in combination with the given
Control electronics.
Control
electronics Voltage Phases
Mains
frequency
Max. power
consumption
Max. current
consumption
Nominal
motor speed
Motor
protection
class
Motor
thermal class
Max. media
temperature Weight
38
RZP 11-0280-EC-31
EKE 07-0065-5E-IM
2000
1000
600
400
200
100
40
Pa
500
300
800
60
50
80
1500
150
1200
120
2000 3000 m3/h
psF
1000 1500 2500
2800
3200
2400
2100
1800
1600
1400
N
1/min
qV
800 4000 5000 6000
m3/s
qV
0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.5
ηesd (Nmax)
30
20
40
48 %
52
54
50
53
81
72
69
87
78
75 L
WA7
84
90 dB
P
1S
0.3
0.4
0.6
0.8
1.0
0.5
0.2
kW
1.5
r1 = 1.15 kg/m3
63 125 250 500 1000 2000 4000 8000 Hz
≤2342 1/min 0.70–1.4 qVopt -4 -7 -1 -3 -3 -10 -17 -26 dB
>2342 1/min 0.70–1.4 qVopt -9 -10 -7 -5 -3 -8 -12 -22 dB
63 125 250 500 1000 2000 4000 8000 Hz
≤2342 1/min 0.70–1.4 qVopt -7 -7 -2 0 -5 -10 -20 -31 dB
>2342 1/min 0.70–1.4 qVopt -11 -9 -6 -1 -5 -8 -15 -26 dB
Direct driven centrifugal fans / RZP / Technical data
Technical data
Determination of the Octave level
Inlet side
Discharge side Relative sound power level LWrel6 at octave band correction factors fc.
Relative sound power level LWrel7 at octave band correction factors fc.
Duty point
Speed Duty point
Speed
Density of media 1.15 kg/m3.
Measured in installation A according to ISO 5801 (unducted).
Normal operation area
Please note coloured area!
N do not use in this area
39
RZP 11-0280-EC-31
EKE 07-0065-5E-IM
RZP 11- ZBD
0280-EC-31 ZBD 01-0506-A
484
30
226 263
548
270
220
30
30
315
570
236 123
130
421
10.5 395
421
395
358
3 x 100
225
10
361
30
216
225
ZKF 15-1919 ZKE 15-1919 ZSG 03-0280
LG 0 LG 90 LG 180 LG 270 RD 0 RD 90 RD 180 RD 270
RZP 11- EKE 07- V HZ kW A 1/min °C ~kg
0280-EC-31 0065-5E-IM 230 1~ 50/60 1.8 7.8 3100 IP54 F 40 32
Direct driven centrifugal fans / RZP / Technical data
Technical data
Dimensions in mm, subject to change.
Accessories
Anti Vibration Rubber Buffers
The system efficiency ηesd is the efficiency of the whole system, Fan–Motor–Control
electronics.
Attention! The performance curves relates to the fan in combination with the given
Control electronics.
Control
electronics Voltage Phases
Mains
frequency
Max. power
consumption
Max. current
consumption
Nominal
motor speed
Motor
protection
class
Motor
thermal class
Max. media
temperature Weight
40