| Ethernet Interface | |
| Number of Ports | 1 |
| Speed | 10/100 Mbps, auto MDI/MDIX |
| Connector | RJ45 |
| Magnetic Isolation Protection | 1.5 kV built-in |
| • WLAN Interface | |
| Standards Compliance | 802.11a/b/g/n |
| Network Modes | Infrastructure, Ad-Hoc |
| TX Transmit Power | 802.11b: Typ. 16 dBm ±1.5 dBm @ 1 Mbps, Typ. 16 dBm ±1.5 dBm @ 11 Mbps 802.11a: Typ. 15 dBm ±1.5 dBm @ 6 Mbps, Typ. 14 dBm ±1.5 dBm @ 54 Mbps 802.11g: Typ. 16 dBm ±1.5 dBm @ 6 Mbps, Typ. 14 dBm ±1.5 dBm @ 54 Mbps 802.11n 2.4 |
| RX Sensitivity | 802.11b: -92 dBm @ 1 Mbps, -84 dBm @ 11 Mbps 802.11a: -91 dBm @ 6 Mbps, -74 dBm @ 54 Mbps 802.11g: -91 dBm @ 6 Mbps, -73 dBm @ 54 Mbps 802.11n 2.4 GHz -89 dBm @ 6.5 Mbps (20 MHz), -71 dBm @ 72.2 Mbps (20 MHz) 802.11n 5 GHz -89 dBm |
| Radio Frequency Type | DSSS/OFDM |
| Transmission Rate | 802.11a: 54 Mbps 802.11b: 11 Mbps 802.11g: 6 to 54 Mbps 802.11n: 6.5 to 150 Mbps |
| Transmission Distance | Up to 100 meters (in open areas) |
| Wireless Security | • WEP: 64-bit/128-bit data encryption • WPA, WPA2, 802.11i: Enterprise mode and Pre-Share Key (PSK mode • Encryption: 128-bit TKIP/AES-CCMP EAP-TLS, PEAP/GTC, PEAPMD5, PEAP/MSCHAPV2, EAP-TTLS/PAP, EAP-TTLS/CHAP, EAP-TTLS/MSCHAP, EAP-TTLS |
| Antenna Connector | Reverse SMA |
| • Serial Interface | |
| Number of Ports | NPort IAW5150A-6I/O: 1 NPort IAW5250A-6I/O: 2 |
| Serial Standards | RS-232/422/485 (DB9 male connector) |
| Serial Line Surge Protection | 4 kV (level 4) |
| Off-line Port Buffering | NPort IAW5150A-6I/O: 20 MB NPort IAW5250A-6I/O: 10 MB |
| • Serial Communication Parameters | |
| Data Bits | 5, 6, 7, 8 |
| Stop Bits | 1, 1.5, 2 |
| Parity | None, Even, Odd, Space, Mark |
| Flow Control | RTS/CTS and XON/XOFF |
| Baudrate | 50 bps to 921.6 kbps |
| Serial Data Log | 64 KB |
| • Serial Signals | |
| RS-232 | TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND |
| RS-422 | Tx+, Tx-, Rx+, Rx-, GND |
| RS-485-4w | Tx+, Tx-, Rx+, Rx-, GND |
| RS-485-2w | Data+, Data-, GND |
| • Digital Input/Output | |
| Digital Inputs | 4 channels |
| Digital Outputs | 2 channels |
| Isolation | 3k VDC or 2k Vrms |
| • Digital Input | |
| Sensor Type | Wet Contact (NPN or PNP), Dry Contact |
| I/O Mode | DI or Event Counter |
| Dry Contact | • On: short to GND • Off: open |
| Wet Contact (DI to COM) | • On: 10 to 30 VDC • Off: 0 to 3 VDC |
| Counter Frequency | 20 Hz |
| Digital Filtering Time Interval | Software Configurable |
| • Digital Output | |
| Type | Sink |
| I/O Mode | DO or Pulse Output |
| Over-Voltage Protection | 45 VDC |
| Over-Current Protection | 2.6 A |
| Over-Temperature Shutdown | 175°C (typical), 150°C (min.) |
| Current Rating | 200 mA per channel |
| Storage Card Slot | 1 microSD (SDHC) card slot; supports up to 32 GB |
| • Software | |
| Network Protocols | ICMP, IPv4, TCP, UDP, DHCP, Telnet, DNS, SNMP V1/V2c/V3, HTTP, SMTP, SNTP, SSH, HTTPS , Modbus TCP (for I/O communication) |
| Configuration Options | Web Console, Serial Console, Telnet Console, Windows Utility |
| Secure Configuration Options | HTTPS, SSH |
| Windows Real COM Drivers | Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded |
| Fixed TTY Drivers | SCO Unix, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X |
| Linux Real TTY Drivers | Linux 2.4.x, 2.6.x, 3.x |
| Utilities | Device Search Utility and NPort Windows Driver manager |
| Management | SNMP MIB-II |
| • Physical Characteristics | |
| Housing | Aluminum sheet metal |
| Weight | NPort IAW5150A-6I/O: without the box: 739.50 g (1.63 lb) with the box: 936.40 g (2.06 lb) NPort IAW5250A-6I/O: without the box: 756.50 g (1.67 lb) with the box: 953.45 g (2.10 lb) |
| Dimensions | 59.6 x 101.7 x 134 mm (2.35 x 4 x 5.28 in) |
| Antenna Length | 109.79 mm (4.32 in) |
| • Environmental Limits | |
| Operating Temperature | Standard Models: 0 to 60°C (32 to 131°F)) |
| Storage Temperature | -40 to 75°C (-4 to 167°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
| • Power Requirements | |
| Input Voltage | 12 to 48 VDC |
| Power Consumption | NPort IAW5150A-6I/O: 300 mA @ 12 V NPort IAW5250A-6I/O: 300 mA @ 12 V |
| Connector | Terminal block |
| • Standards and Certifications | |
| Safety | UL 60950-1, EN 60950-1 |
| EMC | EN 61000-6-2/6-4 |
| EMI | CISPR 22, FCC Part 15B Class A |
| EMS | IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV IEC 61000-4-5 Surge: Power 1 kV; Signal: Ethernet (2 kV), Serial (4 kV) IEC 61000-4-6 CS: 10 V IEC 61000-4-8 |
| Radio | CE (ETSI EN 301 893, ETSI EN 300 328), ARIB RCR STD-33, ARIB STD-66 |
| • Reliability | |
| Alert Tool | RTC (real-time clock) |
| Automatic Reboot Trigger | Built-in WDT (watchdog timer) |
| • MTBF (mean time between failures) | |
| Time | NPort IAW5150A-6I/O: 282,087 hrs NPort IAW5250A-6I/O: 237,037 hrs |
| Standard | Telcordia (Bellcore) Standard TR/SR |
| • Warranty | |
| Warranty Period | 5 years |
Available Models
| Model No. | Description | |
|---|---|---|
| NPort IAW5150A-6I/O | 1-port RS-232/422/485 IEEE 802.11a/b/g/n wireless device server with 4DIs and 2DOs, 0 to 60°C operating temperature | |
| NPort IAW5250A-6I/O | 2-port RS-232/422/485 IEEE 802.11a/b/g/n wireless device server with 4DIs and 2DOs, 0 to 60°C operating temperature |
Optional Accessories
Wireless AP Mounting Kit
| Model No. | Description | |
|---|---|---|
| WK-51-01 | Wall-mounting kit, 51mm wide |
Connectors
| Model No. | Description | |
|---|---|---|
| Mini DB9F-to-TB | DB9 Female to Terminal Block connector |
智能制造網(wǎng)