MR-ISO-H高速隔離轉換器High speed isolation converter

[MR-ISO-D] DUAL channel IN/OUT isolation converter

[MR-MPC] Multiplier isolation converter

[MR-PSC2] DC power supply(2wire loop usp) (2ch)

[MR-PSC] DC power supply(2wire loop usp) (1ch)

[MR-PSA] Potentiometer alarm setter with signal out

[MR-RSA] RTD temperature alarm setter with signal out

[MR-DSA] DC signal alarm setter with signal out

[MR-PMS4] Potentiometer alarm setter (4alarm)

This is a high speed of converter used for transmitting
or converting DC signal.
With built-in noise removal filter, transfers correct
signal, and precision isolation circuits enable
perfect signal transfer not affected by withstand
insulation voltage, transfer speed, noise, etc.

FEATURES
Small size(mm) : 83(H), 51(W), 102(D).
Isolation : input to output to power supply.
Power supply : AC or DC supply.
Wiring : terminal socket wiring.
Case & color : black ABS plastic case.
Weight : about 400g
INPUT SIGNAL SPECIFICATION
OUTPUT SIGNAL SPECIFICATION
Output voltage signal : 12VDC max.
Output voltage impedance : 2Kohm min.
Output voltage noise : 10mV p-p max.
Output current signal : 30mADC max.
Output load resistance : 750ohm max.
Output current noise(250ohm load) : 10mV p-p.
Input voltage signal : -300 ~ 300 VDC.
Input voltage impedance : 1Mohm min.
Input current signal : 30mADC max.
Input current load resistance : 100ohm max.(at 20mA)

GENERAL SPECIFICATION'S
Operating ambient temperature : 0 - 50'C.
Non operating ambient temperature : -20 ~ 80'C.
Temperature coefficient : 0.015%/'C.
Operating ambient humidity : 90% RH max.(non condensing)
Insulation resistance : greater than 100Mohm with 500VDC.
Dielectric strength : 1500VAC @ 1minute (input/out1/out2/power).
Adjustment range : 20% (zero & span) min.
Conversion accuracy : 0.2% max.
Response time : 0 - 90%(1mS).