818
精確的溫度控制器和程序控制器
96W x 96H x 219D mm

應用為:
單區(qū)或多區(qū)的爐子，擴散爐，測試爐，高溫滅菌，環(huán)境艙

采樣頻率:
8 times per second

供電電源:
85 to 264Vac, or 20 to 40V dc/ac

消耗功率:
8.5 watts

工作溫度:
0 - 55 °C

相對濕度:
0 to 90% non-condensing

輸入選擇:
31 Different sensor linearisations + square root & linear

輸出選擇:
Relay, logic, triac, or DC analogue

防護等級:
IP54

The model 818 is a 1/4 DIN, Temperature/Process Controller or Temperature/Process Programmer. With a range of 'Plug In' modules and Software Configuration the 818 series can be made to cover most applications. The 818S offers single loop PID control, while the 818P/P4/P15 give the ability of running complex profiles.

The features include: Self and adaptive tuning Dual display

Choose from: Heat/cool/motorised valave outputs Up to 2 alarms Ramp to setpoint feature on 818S, 1 stored program of 8 ramps and 8 dwells on 818P, 4 stored programs of 8 ramps and 8 dwells on 818P4, 15 programs of 8 ramps and 8 dwells on 818P15. Auto/manual operation.

818 產(chǎn)品擴展

818S-MPC Melt Pressure Controller For Plastics Extrusion

Designed for melt pressure control or melt pump inlet pressure control

Analog retransmission of measured value, setpoint, error or output level to a chart recorder

Adjustable output accel/decel rate limiting

Incorporated transducer excitation power supply

Front panel, push-button calibration of strain gauge

Two fast-acting alarm outputs

818CP 熱處理碳勢控制

與標準氧探頭匹配

0.10% 到 2.00% 碳勢控制

可記錄的模擬傳送信號

可插入報警和通訊板