The USB 100BASE-T1 Converter from Technica Engineering allows you to expａnd your PC/Laptop with an additional Network Interface Card with the in-built USB-LAN chip and to interact directly with your 100BASE-T1 (a.k.a. BroadR-Reach ™) device with only one device. The power supply for the converter is provided by the USB port.
來自Technica Engineering的100BASE-T1 USB轉換器允許您使用內置USB-LAN芯片來擴展您的PC/筆記本電腦網絡接口，并與您的100BASE-T1（也稱為BroadR-Reach™）設備直接交互。轉換器的電源由USB端口提供。

Windows and Linux drivers available.
提供Windows和Linux驅動程序。

It uses the widely used micro-USB and one Broadcom BCM 89811 phy.
它使用廣泛使用的micro-USB和一個Broadcom BCM 89811 phy。

Thus the USB 100BASE-T1 Converter is the ideal solution for working quickly and efficiently with the new 100BASE-T1 technology.
因此，100BASE-T1 USB轉換器是使用新型100BASE-T1技術快速高效工作的理想解決方案。

Feature產品特點

• Converts 100Base-T1 100 MBit/s full duplex 1x unshielded twisted pair (UTP) to USB-LAN
  將100Base-T1信號全雙工方式以非屏蔽雙絞線轉換到USB-LAN

• Master/slave configuration through a windows tool(Linux driver available)
  通過windows工具進行主從配置（也提供Linux驅動）

• Status LEDs
  狀態燈

• Standard Tyco MQS Connector(100BASE-T1)
  標準Tyco MQS接插件(100BASE-T1)

• Standard USB Connector
  標準USB接插頭

• Power requirement: 5V DC provided from USB 2.0,No additional power supply Needed
  電源需求：5V，由USB2.0供電,不需額外供電

• Size: 60 x 42 x 19 mm
  尺寸：60 x 42 x 19 毫米

User Case 使用案例

• 通過100Base-T1 USB Converter,上位機和控制器實現雙向通信
  

• 通過100Base-T1 USB Converter,上位機得以擴展多個以太網網口，進而實現節點仿真