Half-Height, Half-Size x2 PCI Gen 2.0 Express Board
Half height bracket available
CoaXPress 1.1 compliant (supports 1.0 and 1.1. cameras)
Supports one CXP-6 camera
Supports CXP speeds from 1.250 to 6.250 Gb/S
Uses DIN 1.0/2.3 connectors
Provides power for camera (up to 13 Watts per link)
Provides Safe Power, full protection from all power line faults
Cameras are Plug and Play with automatic link speed detection
Cable lengths of up to 135 meters are supported
PCI Express x2 Gen 2.0 interface
Compatible with PCI Express Gen 1.0 slots
I/O connector on bracket
Compatbile with BitBox external I/O module
Highly deterministic, low latency frame grabber to camera trigger
FlowThru technology means no on-board memory is needed
StreamSync acquisition engine optimizes synchronization between acquisition and DMA
StreamSync buffer manager maximize DMA channel efficiency
Acquire variable length frames from line scan cameras
Acquire image sequences well beyond the 4GB barrier
No frame rate limit
Triggers and encoders for external control of acquisition
Programmable signal generator for camera control
Quadrature encoder support including sophisticated triggering schemes
Encoder divider/multiplier
Drivers, utilities and examples for Windows and Linux
Supported on both 32-bit and 64-bit platforms
Drivers for most 3rd party processing environments (e.g. HALCON, LabView, VisionPro, MATLAB, etc.)
Full GenICam support for control and capture
RoHS compliant