橫河SC29C-PTP29氧化還原電極SC29C-PTP29傳感器
SC29
SC29 Redox/pH
This combined electrode can be used in processes with a
constant pH value or for processes where the Redox potential is dependent on the pH in order to achieve a pH compensated Redox potential. In such a case a pH/Redox converter with a high input is required. All pH/Redox converters of Yokogawa have such an input.
SC29（C） Redox/Reference
Additional features for type SC29C-PTP29
• General purpose redox measurements
• Diaphragm resistance （25ºC） < 5 kΩ
• High quality Ag/AgCl reference system （pin） which can stand high temperatures and temperature fluctuations
• Double junction, thickened saturated KCl-solution
• Built-in salt bridge prevents poisoning of the reference.
• Large area PTFE junction to resist fouling.
Additional features of type SC29-PTG29
• Bulb shaped glass membrane.
• Ag/AgCl wire reference system
• Glass Resistance （25ºC）: 50 to 100 MΩ
Additional features for types SC29C-PTC55
• Heavy duty pH sensitive glass.
• Flowing reference system for pollution resistance,
and highly stable reference potential.
• PG13.5 standard DIN electrode connection.
• Adapter to ensure compatibility with full fitting program.
Specifications Redox Electrodes
Type | Temperature range | Process pressure | Metal surface |
SM29-PT9 SC29C（D）-PTP29 SC29-PTG29 SC29C-PTC55 | 0 - 130ºC -10 - 100ºC 0 - 100ºC -10 - 100ºC | max. 1000 kPa max. 500 kPa max. 1000 kPa max. 500 kPa | Platinum Platinum Platinum Platinum |
SC29-PTC54
D. COMBINED ELECTRODES
The combined electrodes are for applications where installation of separate sensors is not possible.
Basically, there are two types:
1. REDOX/REFERENCE
The combined redox/reference electrode for general applications. It has a large KCl-reservoir for long operating life. For atmospheric conditions this electrode can be mounted in a mounting kit FP20- S13. For higher process pressure KCl-ratings the reservoir should be pressurised （the pressure on the reference liquid should be over the process pressure）. For this application the mounting kit FP20- S14 can be used.
FEATURES
● Polarisation free measurement by （patented） inert metal surface.
● Steam sterilisable.
● Dome shaped surface.
● Refillable at the side.
● Temperature range: 0…130°C.
● Process pressure: max. 500 kPa （5 bar）.
● Mounting kit （accessory） for fixing in a fitting.
SPECIFICATIONS
TYPE | TEMP. RANGE | PROCESS PRESSURE | MEMBRANE | REFERENCE LIQUID | REFERENCE SYSTEM | DIAPHRAGM | FLOW |
SC29-PTC54 | 0…130°C | 0…500 kPa | platinum | KCl-solution （1m.） thickened | Ag/AgCl silver-silver- chloride | Ceramic resistance: <10 kOhm | max 0,5 ml/day at 10 kPa overpressure |
SC29-AUG28
2. REDOX /PH
This combined electrode can be used in processes with a constant pH value or for processes where the Redox potential is dependent on pH in order to achieve pH compensated Redox potential.
A Redox-converter with a high impedance reference input is required.
FEATURES
● Polarisation free measurement by （patented） inert metal surface.
● Process pressure: max. 1MPa （10 bar）.
● Temperature range: 0…100°C.
● Bulb shaped glass membrane.
● Ring shaped gold surface.
SPECIFICATIONS
TYPE | TEMP. RANGE | PROCESS PRESSURE | REFERENCE SYSTEM | MEMBRANES | |
GLASS | METAL | ||||
SC29-AUG28 | 0…100°C | 0…1 MPa | Ag/AgCl （wire） silver-silverchloride 1m. KCl | universal pH- glass resistance: 50…100 MOhm/25°C Bulb （shockproof） | gold |
pH電極又稱pH探頭、pH傳感器，英文名稱pH electrode或pH sensor，是PH計上與被測物質接觸的部分，用來測電極電位的裝置。
通常有兩種方法測量水相溶液中的pH值，比色法（pH試紙和比色皿）和電位法。電位法是能夠?qū)崿F(xiàn)連續在線測量和過程監控的*方法，而且電位法可獲得精確且結果可重復的pH值，pH電極測量的核心理論是能斯特方程。
電位分析法所用的電極被稱為原電池。原電池是一個系統，它的作用是使化學反應能量轉成為電能。此電池的電壓被稱為電動勢（EMF）。此電動勢（EMF）由二個半電池構成。其中一個半電池稱作測量電極，它的電位與特定的離子活度有關；另一個半電池為參比半電池，通常稱作參比電極，它一般是與測量溶液相通，并且與測量?jī)x表相連。zui熟悉也是zui常用的PH指示電極是玻璃電極。
一套工業在線pH測量系統通常由pH傳感器即pH電極、pH變送器、電極護套及電纜等四部分構成。
zui初人們對酸堿的意識是入口食物的味道，譬如醋是酸的，檸檬也是酸的，嘗起來澀澀的堿面是堿性的，這是pH值或酸堿度zui初的由來，簡單直觀。
以摩爾值表示水相溶液中的氫離子濃度，濃度從100（1）到10-14，再以10為底的負對數換算，pH范圍即為0-14。pH是拉丁文pondus hydrogenii的縮寫，pondus =壓強，hydrogenii =氫。因此，更精準的pH值定義應是水相溶液中氫離子活度的負對數值，理解這一點非常重要。您可以因此了解到*: 相對而言，液體更容易實現精確的pH值測量，第二: 水相溶液環境里更容易實現精確的pH值測量。
而且，日常生活工作和生產中大部分的pH[1]值測量都是圍繞液體工作的。例如人類攝入的食物藥物以及液體居多，即使終產品不是液體其來源環境也是液體，譬如人類的液體食物有很多:白酒、啤酒、碳酸飲料、果汁、咖啡和茶葉，pH值影響著食物的風味和品質，pH值是藥物生產中的重要指標。而pH值檢測并不簡單，工業制藥生產液態物質比固態物質多得多（由此不難理解工業上水的重要性了），常見工業用水有冷卻水、清洗用水、加熱水、蒸汽和溶劑用水等，除此之外，還包括需要進一步做環保處理的污水。那么，工業生產中，物質經歷著各種變化，相當一部分反應又伴隨著氫離子濃度的變化，因此檢測水相溶液中氫離子濃度的大小即pH值尤為重要。
精確的pH測量可以幫助實現:
1、生產出我們預期想要的產品
2、盡可能的以*生產
3、防止物料損壞、人員傷亡和環境污染
4、滿足法規要求
5、研發工作順利進行
智能制造網