美國Cooper，LXT600-12000inlb扭矩傳感器
扭矩傳感器是將扭矩轉換成比例電信號的負載傳感器。Cooper Instruments提供旋轉式（以不同轉速360度運行）或僅反應式（可運行360度）。庫珀儀器提供各種物理配置和扭矩范圍從10英寸到10萬英寸磅。
A torque cell is a load transducer that will convert a torsional moment into a proportional electrical signal. Cooper Instruments offers a rotating variety, (operates in 360 degrees at various RPM) or a reaction-only style (can operate up to 360 degrees). Cooper Instruments offers a variety of physical configurations and torque ranges from 10 inoz to 100,000 in lbs.
品牌：美國Cooper
型號：LXT600-12000inlb
類別：扭矩傳感器
基本特征BASIC FEATURES：
·設計用于扭矩審計和校準
·可在各種扭矩范圍內使用
·堅固的不銹鋼結構
·可適應任何測試情況
·通過六針bendix連接輸出
·designed for torque auditing and calibration
·available in a variety of torque ranges
·sturdy stainless steel construction
·can be adapted to any test situation
·output by means of a six-pin bendix connection
規格Specifications：
| 量程Capacity – inlb | 1200–24000英寸磅（150-2712納米） |
| 額度輸出RATED OUTPUT | 額定2 mV/V |
| 安全過載SAFE OVERLOAD | 額定輸出的150% |
| 零點平衡ZERO BALANCE | 額定輸出的±1% |
| 勵磁電壓EXCITATION VOLTAGE | 20 Vdc或Vac |
| 橋電阻BRIDGE RESISTANCE | 700歐姆 |
| 非線性NONLINEARITY | 額定輸出的±0.1% |
| 滯后HYSTERESIS | 額定輸出的±0.1% |
| 非重復性NONREPEATABILITY | 額定輸出的±0.2% |
| 工作溫度OPERATING TEMPERATURE | -60至200℉（-50至92℉） |
| 重量WEIGHT | 46盎司（1.3千克） |
| H英寸（mm）H inches (mm) | 3.62（92） |
| 方傳動Square Drive | 1個 |
| 扭轉剛度（in-lb/rad）Torsional Stiffness (in-lb/rad) | 3.60 x 106英寸 |
產品描述
TDF系列600反作用扭矩傳感器使用方便機械扭矩扳手和其他用于生產和自動化的扭矩敏感裝置裝配應用程序。美國制造的17-4不銹鋼鋁蓋，這種堅固的裝置可以通過它的法蘭，并耦合到任何方驅動儀表以獲得精確的扭矩測量。它的多功能外殼設計可定制對任何測試情況，及其使用的金屬箔應變片技術確保精確測量。不同的扭矩范圍容量是提供不同尺寸的方形驅動器和法蘭配置。輸出通過Bendix六針PTO6E-10-6P插頭?？蛇x的提供配套插座。
The TDF Series 600 Reaction Torque Sensors allow easymonitoring and calibrationofmechanical torque wrenches andother torque-sensitive devices used in production and automatedassembly applications. Made in the USA of 17-4 stainless steel with an aluminum cover, this sturdydevice can be mounted anywhere by means of its flange, and coupled to anysquaredriveinstrumentfor accurate torque measurement. Its versatile housing design allows it to be customized toanytest situation, and its use of metalfoilstraingaugetechnologyassuresaccuratemeasurements.Different torque range capacities are available, as are differentsizedsquaredrivesandflangeconfigurations. Output is by means of a Bendix six-pin PTO6E-10-6P plug. Optional mating receptacleavailable.
瀏覽了該產品的用戶還瀏覽：
智能制造網