Erichsen壓力傳感器 Erichsen探針 Erichsen試驗棒
品牌介紹：
德ERICHSEN（儀力信）有超過90年歷史，是家舉世的油漆和涂料測試儀器生產廠家，包括機械、電子、化學和光學測量方法，檢定結果獲得*及保證，具性。儀器分為四大類：ERICHSEN板材測試，表面測試，耐腐蝕測試和材料測試。
常見型號：
0019.01.31 Mehrschneidengeraet 295/I壓力傳感器
0094.01.31 Ritzstift nach van Laar 426壓力傳感器
Model 234 R/II （0 - 50 um,Skalenteilung:2um）濕膜測厚儀
906-1000N NR. 0756.06.32壓力傳感器
Nr4 0.5mm OPEL探針
Haertepruefstab 318（including Nr1 0.75mm）試驗棒
Kraftaufnehmer 906-500 N ,ID-NR.0756.05.32壓力傳感器
906-100N, ART-NR.0756.03.32壓力傳感器
906-50N, ART-NR.0488.02.32壓力傳感器
906-50N, ART-NR.0756.02.32壓力傳感器
906-10 bar,Best.-Nr.0759.06.32壓力傳感器
DMS-Eingang fuer Sensoren （1-2,2 mV/V）,ID-NR.0746.01.32壓力傳感器
PHYSIMETER 906 MC-E , ID-NR.0260.01.31壓力傳感器
UNIMAT 052-5 kN ,ID-NR.0235.01.31壓力傳感器
Datenkabel XRJ45,ID-NR.0754.01.32電纜
Kraftaufnehmer 906-100 N ,ID-NR.0756.03.32壓力傳感器
Kraftaufnehmer 906-500 N ,ID-NR.0756.05.32壓力傳感器
Modell 318測試筆
0100.01.31刻刀
0430.03.32測試盤
0567.01.32砝碼組件
0539.05.32安裝附件
2 Stueck Bohrer 5 Nr：910928241
435Mar
509MC
P430
#295
DIN4
ISO4
Model:288 Width:230 mm
508 BVA
0756.02.32
Modell 527 TINT Chroma- Instrument
0488.02.32
318
906- 10 bar Order number: 0759.06.32
please see the picture
202EM
560MC
515
UNIMAT 052 -5kN
PHYSIMETER 906MC-E
Force transducer 906-100N
Force transducer 906-500N
Erichsen Data Cable
Erichsen Wire strain gauge
unimat.054, 10KN
PIG455
234R/II
508VBA
see the picture
58675 Hemer Model 333 10-60um/70-120um
0-25μm
Erichsen475
0001.01.31 model 200/paint on the metal plates used to detect adhesion ａnd flexibility on the / test results in line with DIN EN ISO 1520, ISO 1520, BS 3900, Part E4, SIS 18 41 77.NFT 30-019 / host includes a testing tool
0001.01.31 model 200/paint on the metal plates used to detect adhesion ａnd flexibility on the / test results in line with DIN EN ISO 1520, ISO 1520, BS 3900, Part E4, SIS 18 41 77.NFT 30-019 / host includes a testing tool
0051.02.31model 266S/Cylindrical bending tester in line with EN ISO 1519, EN13523-7, ASTM D 522. Host include: 14 axis （2,3,4,5,6,8,10,12,13,16,19,20, 25,32 mm） test sample thickness 0.3 or 1mm, the test sample width: 100mm
0051.02.31model 266S/Cylindrical bending tester in line with EN ISO 1519, EN13523-7, ASTM D 522. Host include: 14 axis （2,3,4,5,6,8,10,12,13,16,19,20, 25,32 mm） test sample thickness 0.3 or 1mm, the test sample width: 100mm
234 R/II 0-50um
234 R/II 0-50um
PT100/L=250/0-350℃
606/2*1000-1
606/2*1000-2
0539.05.32
0567.01.32
0430.03.32
ESR 71M4B 0.37kW
KNIFE/463
UNIMAT PLUS 052 + 50N
UNIMAT 052 + 906MC + 50N
E783T
Force sensor/E718/2KN
318
5 No
智能制造網