當前位置：東莞市瑞力檢測設備有限公司>>力學類設備>>電池擠壓試驗機>>動力電池針刺試驗機

動力電池針刺試驗機

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質其他

所在地

在線詢價收藏產品查看聯系電話

聯系方式：黃先生查看聯系方式

更新時間：2023-04-04 07:10:51瀏覽次數：294次

聯系我時，請告知來自智能制造網

產品分類 品牌分類

暫無信息

東莞市瑞力檢測設備有限公司

經營模式：其他

商鋪產品：59條

所在地區：

聯系人：黃先生

詢價 給他留言

產品簡介

動力電池針刺試驗機

詳細介紹

產品用途Purpose:

電池針刺試驗機通過針刺試驗檢驗電池的安全性能，通過實時試驗數據(如電池電壓、電池表面溫度、壓力視頻數據進行實驗結果判定)針刺試驗結束后電池應不起火，不爆炸、不冒煙;也是各電池廠家及研究所的檢測設備。

產品特點 Product Feature

Qc743老標準要求:

用直徑@3mm~8mm的耐高溫鋼針、以IOmm/s~40mmls的速度，從垂直于蓄電池模塊極板的方向貫穿至少三個蓄電池單體(鋼針停留在蓄電池中)

QC743新標準要求:

用6mm-o10mm的耐高溫鋼針(針尖的角度為60度，針的表面光潔、無銹蝕、氧化層及油污)、以20~30mm/s的速度，從垂直于蓄電池極板的方向，直至貫穿3個單體蓄電池(鋼針停留在蓄電池中。試驗后觀察1h)

QC743 Old Standard Requirement:

With diameter o3mm-8mm high temperatureresistant steel needle, lOmmls~40mms speed, penetrate at least three storage battery monomer from vertical direction of store battery module pole board(steel needle stay in the storage battery)

QC743 New Standard Requirement:

With diameter 6mm-o10mm high temperature resistant steel needle(the angle of needle point is 60 degree, needle surface firish, no corrosion,oxidelayer and oilstin).20mmls-3Ommls speed,from vertical direoction of store battery module pole board, penetrate till hree monomer storage battery(steel needle stay in the storage battery, observe 1h after test)

標準依據 Standard Basis

GB/T 18332.2-2001電動道路車輛用金屬氫化物鎳蓄電池

QC/T 743電動汽車用鋰離子蓄電池

QC/T 744電動汽車用金屬氫化物鎳蓄電池汽車動力電池的相關標準國際標準(ISOIIECISAE/JEVA/CEN等)、國際標準協會及"863計劃"電動汽車重大專項相關測試規范

QB/T2947.3-2008電動自行車用蓄電池及充電器第3部分

DBI2/T246-2005電動自行車鋰電池測試標準

GB 19521.11-2005鋰電池組危險貨物危險特性檢驗安全規范

GB/T31485-2015電動汽車用動力蓄電池安全要求及試驗方法

GB/T31486-2015電動汽車用動力蓄電池電性能要求及試驗方法

GB/T31467.3-2015電動汽車用鋰離子動力蓄電池包和系統測試規程

GB/T 18332.2-2001 Nickle metal hydride storage battery for electric road vehicle

QC/T743 Lithium ion storage battery for electric vehicle

QC/T744Vehicle power batlery revelant international standards of nickle metal hydride storage battery for electric vehicle(SOVIECISAEUJEVACENetc).international standard association and "863 plan" electric vehicle major specific revelant test specification

QB/T2947.3-2008 Part 3 storage and charger for electric bicycle

DB12/T246-2005 Electric vehicle lithium battery test standard

GB 19521.11-2005Lithium battery pack dangerous goods dangerous property inspection safety specification

GB/T31485-2015 Power storage battery safety requirement and test method for electric vehicle

GB/T31486-2015 Power storage battery safety requirement and test method for electric vehicle

GB/T31467.3-2015Lithium ion power storage battery pack and system test procedure for electric vehicle

產品規格Product specifications

設備型號Equipment model	測試空間Test space(mm)	設備外形尺寸Machine External Dimension
RL-DZC-2T	200×200x200	W750xD650xH1800mm
RL-DZC-5T	600x600x600	W1000xD900xH2200mm
RL-DZC-9002D	800x800×800	W3000xD1200xH1300mm
RL-DzC-9002T	1000x1000x1000	W3300xD150OxH1500mm

輔助功能 Accessibility Function	電壓、溫度采集、視頻監控系統、滅火系統、安全防爆系統、煙霧排放系統、煙霧過濾系統 Voltage,Temperature acquisition,Camera monitoring system,Sprinkler system, Safety explosion proof system,Smog emission system, Smog filter system
針刺速度Nail Penetrating Speed	0~80mm/min（可調），可按要求定制到200mm/min 0~80mm/min (Adjustable )，Can customize to 200mm/min according to requirement
測試空間(mm)Test Space	200x200x200mm、500x500x500mm、800x800x800mm、1000x1000x1000mm(可按要求定制) Can customize according to requirement
外形尺寸External Dimension	依實際設計為準Subject to actual design

選

配

指

標

電壓選擇Voltage Select	0-10V,0-100V,0-1000v
溫度采集范圍Temperature Acquisition Range	0~1200°℃
電壓、溫度精度Accuracy of voltage and temperature	±1%FS
電壓分辨率Voltage Resolution	1mv
溫度分辨率Temperature Resolution	0.1C

主

要

技

術

指

標

速度Speed	0~80mm/min（可調），可按要求定制到200mm/min 0~80mm/min ( Adjustable ) , can customize to 200mm/min according to requirement
針刺行程N(yùn)ail Penetrating Stroke	0~1000mm范圍內可選0~1000mm range optional
結構 Structure	立式、臥式(可根據實際尺寸選擇)Vertical/Horizontal type(choose according to actual dimension)
耐高溫鋼針規格High Temperature Resistant Steel Needle Specification	直徑中3mm~$8mm/Diameter $3mm~8mm
針刺方式Nail Penetrating Method	橫向、縱向Landscape orientation,Portrait
針刺變形量Nail Penetrating Deformation Amount	無（如需要有則可選電腦控制）No (if need,please choose computer control type)
針刺保持時間Nail Penetrating Holding Time	0~99小時99分99秒/0~99 Hour 99 Minute 99 Second
驅動方式 Driving Method	液壓Hydraulic
針刺速度精度Accuracy of Nail Penetrating Speed	±0.1mm/s
力量精度Force Accuracy	±1%

結

構

箱體Chamber Body	立式或臥式結構與控制部分分開Vertical/ Horizontal type,apart with control part
通訊 Communication	無（如需要有則可選電腦控制）No (if need,please choose computer control type)
耐高溫鋼針 High Temperature Resistant Steel Needle	直徑中3mm~$8mm,可按要求定制Diameter o3mm~8mm,can customize by requirement
數據采集模塊Data Acquisition Module	獨立遠程采集隔離，多路電壓、溫度、電流采集通道、確保數據無誤Independent remote acquisition and isolation,multiplex voltage, temperature, current acquisition channel, ensure data correct(optional)
通道數量標配Channel Quantity Standard Configuration	2通道、4通道、8通道，多種數據采集系統（選配）2channel,4channel,8 channel,multiple data acquisition system(optional)
攝像監控系統 Camera Monitoring System	測試區域裝配高清攝像監控系統，并可遠程控制，具有防爆功能（選配）Test area install high definition video monitoring system,can remote control, explosion proof function(optional)

標準配置 Standard Configuration	針刺主機1套,控制柜1套，直徑v3mm~u8mm耐高溫鋼針1套Nail penetrating main body one set,control cabinet one set,diameter u3mm~u8mm high temperature resistant steel needle one set
測試夾具Test Clamp	特定制作，根據樣品實際使用條件而定Specific production,customize by sample actual usage condition
電源電壓Power Supply	AC380V 50HZ三相五線制AC380V 50HZ three phases five wires
使用環境 Usage Environment	0°C~45°℃