精品乱码一区内射人妻无码-亚洲中文AⅤ中文字幕在线-免费不卡国产福利在线观看-国产综合无码一区二区色蜜蜜

湖北澳星環保成套設備有限公司

當前位置：湖北澳星環保成套設備有限公司>>閥門>>翻板閥、鎖風閥、卸灰閥類>>鐘形卸灰閥

鐘形卸灰閥

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質其他

所在地荊州市

在線詢價收藏產品查看聯系電話

聯系方式：查看聯系方式

更新時間：2022-08-27 13:23:03瀏覽次數：307次

聯系我時，請告知來自智能制造網

產品分類 品牌分類

暫無信息

湖北澳星環保成套設備有限公司

經營模式：其他

商鋪產品：99條

所在地區：湖北荊州市

詢價 給他留言

產品簡介

本系列鐘形卸灰閥廣泛適用于冶金、建材、石化、電力等行業，作為各工業爐窯及除塵系統的卸灰裝置

詳細介紹

本系列鐘形卸灰閥廣泛適用于冶金、建材、石化、電力等行業，作為各工業爐窯及除塵系統的卸灰裝置。

This series valve is widely used in metallurgy, building material, oil chemical and electric power industries etc. It is the discharging device of stove and removing dust system.

結構特點：

Structure characteristic:

該鐘形卸灰閥由閥體、錐形閥塞、連桿、驅動裝置等組成，用連桿拉動閥塞上下運動完成啟閉動作。其中X型為橡膠軟密封，應用于冶煉高爐噴煤系統的煤粉輸送控制。W型為閥體本體材料密封，應用于除塵系統塵灰輸送控制。

This valve is made up of body, cone valve plug, connected pole, driving device etc. The plug drew by the connected pole moves up and down to complete the action of open and close. Type X denotes rubber soft seal, which is applied to carrying control of coal powder in smelt blast furnace gushing coal system. Type W denotes body material seal, which is applied to carrying control of dust powder in removing dust system.

性能參數：

Performance parameter:

公稱壓力

Nominal pressure

0.4MPa

適用溫度

Suitable temperature

80～150℃

密封試驗壓力

Seal test pressure

0.44MPa

強度試驗壓力

Strength test pressure

0.6MPa

適用介質

Suitable medium

含煤氣塵灰、煙氣塵灰煤粉等干燥細粉物料

Dust with coal gas and smoke, dry powder

工作原理：

Working principle:

手動鐘形卸灰閥利用力矩平衡的方法實現卸灰。當作用于錐形塞上的物料產生的力矩大于重錘搖桿產生的力矩時，錐形塞打開向下卸灰。一旦積灰卸去后，重錘與搖桿產生的力矩使錐形塞迅速關閥。落料的頻率及卸灰量依據工況需要來調整重錘位置。

執行機構得到程序指令后推動搖桿使錐形塞打開向下卸灰，積灰卸去后，依據程序規定時間，推桿推進使錐形塞關閉密閉。執行機構的推出與推進都有行程控制，同時反饋開關信號。

The valve realizes discharging using trimming moment. When the moment made by material on cone plug is greater than that of heavy hammer and rocker, the plug will open adown to discharge. After discharge the moment made by heavy hammer and rocker will drive cone plug close quickly. Dropping material frequency and discharge amount is determined by the working condition demａnd to adjust heavy hammer position.

Actuator drives the rocker after receives program order, and the rocker drives the plug open adown to discharge dust. Draw stem drives the plug to close according to the program time after discharge. Push and extrusion of actuator are controlled by journey and feed back switch signal at the same time.

XH--- X W系列外形連接尺寸：

Appearance joint dimension:

DN	200	250	300	350	400	450	500	600	700	800
D	370	420	480	530	620	670	720	835	935	1055
D1	330	380	440	490	570	620	670	780	880	990
D2	280	330	380	430	500	550	600	700	800	900
D3	390	440	500	550	650	700	750	865	965	1083
D4	350	400	460	510	600	650	700	810	910	1020
D5	240	290	340	390	450	500	550	650	750	850
H	350	400	450	500	550	600	640	680	730	760
H1	480	530	580	630	680	730	770	810	860	890
L1	755	805	855	925	975	1025	1075	1275	1375	1475
L2	740	790	840	910	960	1010	1060	1200	1300	1400
n-d	8-Φ18	12-Φ18	12-Φ22	12-Φ22	16-Φ22	16-Φ22	20-Φ22	20-Φ26	24-Φ26	24-Φ30
電動推桿 Electric draw stem	DTⅠA25-M P：0.025kw			DTⅠA63-M P：0.06kw				DTⅠA100-M P：0.25kw
氣動推桿 Pneumatic draw stem	10A-5TCC32B			10A-5TCC40B				10A-5TCC50B

使用說明：

Operation instruction:

l 安裝時請注意閘門本體上標明介質流向，清除內腔附著物。兩法蘭連接時必須加密封墊片，然后均勻鎖緊螺栓。

l 設備在運行時，請定期給傳動部分加潤滑油。執行部分定期維護和檢修。

l 若長期存放應使設備處于關閉狀態，各傳動部位加潤滑油，不允許露天存放或堆置。

l Pay attention to the direction of medium in valve body. Clean the inner body. Add seal cushion between two flanges connection and screw down bolt

l Please add lubricant to transmission when equipment is operating and maintain and check the actuator regularly.

l Add lubricant to transmission part when valve is long stored. It should not be placed or piled up in the open air.

關鍵詞：卸灰閥

以上信息由企業自行提供，信息內容的真實性、準確性和合法性由相關企業負責，智能制造網對此不承擔任何保證責任。溫馨提示：為規避購買風險，建議您在購買產品前務必確認供應商資質及產品質量。