價格好BaumerNE212.013AXA2 計數器其他
￥面議
北京康拉德科技有限公司
免費會員您現在的位置： 北京康拉德科技有限公司>>其他>> 其他Motovario其他 Lambrecht 00.14567.100.040 24V DC; Output 4-
其他Motovario其他 Lambrecht 00.14567.100.040 24V DC; Output 4-
| 參考價: | 面議 |
具體成交價以合同協議為準- 其他Motovario 產品型號
- 品牌
- 0 廠商性質
- 北京市 所在地
訪問次數：190更新時間：2022-03-07 14:38:52
聯系我們時請說明是智能制造網上看到的信息，謝謝!
產品簡介
Lutz 1PLH150-35DE10B 齒輪泵
Lutz MD-2/400W 0004-088 電機其他 Lambrecht 00.14567.100.040 24V DC; Output 4-20mA
產品介紹
Lambrecht 00.14567.100.040 24V DC; Output 4-20mA
Lambrecht 00.14577.100040 風速測量儀
Lambrecht 36.09339.000000 軟件
Lambrecht 34.02520.022000 記錄紙
Lammers 0401000374 7AA 71 M-04 電機
Lammers 0401000184 7AA 63M-04, 0.18KW 電機
Land LI-099.402 煙塵分析儀
Land LI-805660 煙塵分析儀其他 Lambrecht 00.14567.100.040 24V DC; Output 4-20mA
Land LI-801962 煙塵分析儀
Land LI-406.531 插頭
Land LI-406.528 插頭
Landefeld KH 34 P-V 球閥
Landefeld SN 3434 HD 管接頭
Lanny 89060202;Kolben unten komplett DDM0051 泵用活塞
Lanny GmbH EFL1B99JU V1 減壓閥
LAP LAP 30PDL/PDL-00008+Schutzkappe PDL-00010 激光器
Lapp 22260603 插頭
Lapp 22260766 插頭
Lapp H-BE 10SS 10192000 16A 500V 6KW 插頭
Lapp H-BE 6SS 10190000 16A 500V 6KW 插頭
Lapp ART-NR.:0029590
Lapp ART-NR.:0023302
lapp kabel Deutschland UNITRONIC FD CP (TP) plus 6X2X0,75 500 M 電纜
lapp kabel Deutschland OELFLEX CLASSIC 100 4G4, 200 M 電其他 Lambrecht 00.14567.100.040 24V DC; Output 4-20mA 纜
lapp kabel Deutschland 73220227
LAPPORT FORM 9011 20x20x200 Nr. 509 油石
LAPPORT FORM 9011 10x10x100 Nr. 502 油石
LARU 224.058.02.A0 液壓缸用活塞桿
LASER 11-1208839-00208 印刷用版
LASER 11-1208839-02206 印刷用版
LASER 11-1208839-02208 印刷用版
LASER 11-0020080-00050 印刷用版
■ Environmental
Operating temperature
-40 to 80°C (-40° to 176°F).
Storage temperature
-40 to 85°C (-40 to 185°F).
Relative humidity
5 to 95% non-condensing.
Power Requirement
12-32V DC SELV (Safety Extra Low Voltage),
1.3W max.
Isolation
1500V AC peak. 250V AC (354V DC) continuous
isolation between input, output, and power (3-way).
Shock and Vibration Immunity
Vibration: 4g, per IEC 60068-2-64.
Shock: 25g, per IEC 60068-2-27
Approvals其他 Lambrecht 00.14567.100.040 24V DC; Output 4-20mA
CE compliant. UL/cUL Class I Div. 2 Zone 2..
Electromagnetic Compatibility (EMC) Compliance
Radiated Emissions: BS EN 61000-6-4, CISPR 16.
RFI: BS EN 61000-6-2, IEC 61000-4-3.
Conducted RFI: BS EN 61000-6-2, IEC 61000-4-6.
ESD: BS EN 61000-6-2, IEC 61000-4-2.
EFT: BS EN 61000-6-2, IEC 61000-4-4.
Surge Immunity: BS EN 61000-6-2, IEC 61000-4-5.
■ Physical
General
General-purpose enclosure designed for mounting on
35mm “T-type” DIN rail.
Case Material
Self-extinguishing polyamide, UL94 V-0 rated, color
light gray. General-purpose NEMA Type 1 enclosure.
I/O Connectors
Removable plug-in terminal blocks rated for 12A/250V;
AWG #26-12, stranded or solid copper wire.
Dimensions
17.5 x 114.5 x 99.0 mm (0.7 x 4.51 x 3.90 inches).
Shipping Weight
0.22 kg (0.5 pounds) packed.
Ordering Information
Models
TT334-0700
Four-wire transmitter, potentiometer/thermistor input
Services
TT330-Config/Cal
Factory custom configuration/calibration service.
Specify input type, input/output zero and full-scale
values, filtering, and sensor fault settings on order.
Software
TTC-SIP (recommend one kit per customer)
Software Interface Package for Acromag TT Series
transmitters. Includes configuration software CD-ROM
(5040-944), isolator (USB-ISOLATOR) and two USB
cables (4001-112, 4001-113).
Accessories
See for more information.
USB-ISOLATOR
USB-to-USB isolator, includes USB cable (4001-112).
TTBUS-KIT
DIN rail bus power connector and left/right terminal
blocks. One kit supports multiple transmitters.
IMPORTANT: To prevent damage or errors
from grounded PCs and surges, Acromag
strongly recommends use of their USB-ISOLATOR
when configuring a TT330 Series transmitter.
248-295-0880 ■ 248-624-9234 ■ ■ ■ 30765
Wixom Rd, Wixom, MI 48393 USA
Transmitters: TT330 Series
Bulletin #8400-668b
Description
The TT335 model is a space-saving four-wire
transmitter that isolates and converts an RTD
sensor input to a proportional control signal. DC
current and voltage output are both supported
on a single model. An optional DIN rail bus can
deliver primary or redundant power to multiple
units without wiring.
High-voltage isolation separates the input from
the output circuit. Isolation protects from surges,
reduces noise, and eliminates ground loop errors.
Setup and calibration are fast and easy with
a convenient USB connection to your PC and
Acromag’s Windows configuration software.
Advanced signal processing capabilities, variable
range input, and convenient USB programming
make this instrument a very versatile temperature
measurement device. These transmitters can
withstand harsh industrial environments and
operate reliably across a wide temperature range
with very low drift. They feature RFI, EMI, ESD,
EFT, and surge protection plus low radiated
emissions.
Key Features & Benefits
■ Easy setup and digital calibration via USB with
Windows configuration software
■ Selectable RTD or linear resistance input type:
Pt RTD (100Ω, 200Ω, 500Ω, or 1000Ω),
Ni RTD (120Ω), Cu RTD (10Ω), or
Resistance (0-450Ω)
■ Universal output connections support ranges
up to ±21mA or ±10.5V DC without rewiring
■ Pluggable terminals for convenient wiring
■ High accuracy, linearity, stability, and reliability
■ User-selectable filtering (none, low, med., high)
■ Fast response (as low as 32ms)
■ Supports normal or reverse-acting output
■ Selectable upscale or downscale operation for
sensor faults and lead-break detection
■ Bus power, local power, or both for redundant
power supplies
■ 1500V isolation, 3-way (power, input, output)
■ Shock (25g) and vibration (4g) resistant
■ Wide ambient operation (-40 to 80°C)
■ CE and UL/cUL Class 1 Div 2 Zone 2 approvals
RTD (Pt, Ni, Cu) or 0-450 ohm input ◆ Universal
current/voltage output ◆ 12-32V DC local/bus power
TT335 Isolated RTD/resistance input four-wire transmitter
9 8 7
12 11 10
BOTTOM VIEW
(INPUT SIDE)
TOP VIEW
(OUTPUT & POWER SIDE)
17.5 mm
(0.69 in.)
99.0 mm
(3.90 in.)
SIDE VIEW
OUTPUT
POWER
114.5 mm
(4.51 in.)
TB1
TB2
TB3
TB4
2 1 3
5 4 6
+
–
DC SUPPLY
(12-32V DC)
EARTH
GROUND
+
–
12
11
10 –
FUSE
+
+
–
R
–
+
9
8
7
SHIELDED
CABLE
–
–
+
+
–
R
–
EARTH
GROUND
I
CURRENT
OUTPUT
VOLTAGE
OUTPUT
OPTIONAL
GROUND
RAIL BUS
POWER
35mm DIN Rail
Rail Bus Connector
#1005-063
TT300
Series
USB
TT300
Series
USB
TT300
Series
USB
TT300
Series
USB
TT300
Series
USB
TT300
Series
USB
RTD Sensor or Resistance Input
1
2-WIRE 3-WIRE 4-WIRE
2
5
4
2
5
1
4
2
5
1
4
TT330 Series Transmitter
Configuration Software
is downloadable (FREE)
from .
Windows® XP, Vista,
7, and 8
USB
Configured
TT335 Model software allows you to configure transmitters
offline,
save the file, and download into units later, at your
convenience.
248-295-0880 ■ 248-624-9234 ■ ■ ■ 30765
Wixom Rd, Wixom, MI 48393 USA
All trademarks are property of their respective owners.
Copyright © Acromag, Inc. 2013. Data subject to change
without notice. Printed in USA 8/2013
Transmitters: TT330 Series
TT335 Isolated RTD/resistance input four-wire transmitter
Performance Specifications
■ USB Interface
USB Connector
Type: USB Mini-B type socket, 5-pin.
Data rate: 12Mbps. USB v1.1 and 2.0 compatible.
Maximum cable length: 5.0 meters.
USB Transient Protection
Transient voltage suppression on power and data lines.
Driver
Not required. Uses Windows HID drivers.
■ Input
Default Configuration
100Ω Pt RTD, α=0.00385, -200 to 850°C input,
4-20mA output, upscale break detect, medium filter.
Input Configuration
Two-, three- or four-wire sensor input connections.
Programs in °C, °K, °F, or ohmic integer values only.
Input Ranges
Input Type Input Range Accuracy 2
RTD, Pt 100Ω
RTD, Pt 200Ω
RTD, Pt 500Ω
RTD, Pt 1000Ω
RTD, Ni 120Ω
(Minco 7-120)
RTD, Cu 10Ω
(Minco 16-9)
Resistance (linear) 1
-200 to 850°C
(-328 to 1562°F)
-200 to 850°C
-200 to 850°C
-200 to 850°C
-80 to 320°C
(-112 to 608°F)
-200 to 270°C
(-328 to 518°F)
0 to 450Ω
±0.2°C, ±0.019%
±0.3°C, ±0.029%
±0.5°C, ±0.048%
±1.0°C, ±0.095%
±0.08°C, ±0.020%
±0.5°C, ±0.106%
±0.05Ω, ±0.010%
Note 1: Linear resistance input range approaches but
does not include 0Ω and 500Ω. If exactly 0Ω or 500Ω
is measured, break detection is triggered.
Note 2: Rated accuracy (in °C and % of span) applies
for input spans greater than 5% of input full-scale.
Input Scaling Adjust
Zero: 0 to 95% of range, typical.
Full scale: 5 to * of full scale range, typical.
Lead Break (Sensor Burnout) Detection
Configurable for either upscale or downscale.
■ Output
Output Range
Range Over-Range Resolution
±10V
±5V
0 to 10V
0 to 5V
±20mA
0 to 20mA
4 to 20mA
±10.5V
±5.25V
–0.5527 to +10.5V
–0.27634 to +5.25V
±21mA
–1.1054 to 21mA
–1.1054 to 21mA
1 part in 62558
1 part in 31278
1 part in 59293
1 part in 60414
1 part in 62400
1 part in 58732
1 part in 46984
Output Accuracy
Better than ±0.05% of span, typical (±0.1% max.)
for for nominal input spans. Includes the effects
of repeatability, terminal point conformity, and
linearization, but does not include sensor error.
Output Load
Voltage output: 1K ohms minimum.
Current output: 0-525 ohms.
Output Response Time (for step input change)
No filter: 32ms.
Low filter: 50ms.
Medium filter: 160ms.
High filter: 1210ms.
Output Ambient Temperature Drift
Better than ±80ppm/°C (±0.0080%/°C).
■ Environmental
Operating temperature
-40 to 80°C (-40° to 176°F).
Storage temperature
-40 to 85°C (-40 to 185°F).
Relative humidity
5 to 95% non-condensing.
Power Requirement
12-32V DC SELV (Safety Extra Low Voltage),
1.3W max.
Isolation
1500V AC peak. 250V AC (354V DC) continuous
isolation between input, output, and power (3-way).
Shock and Vibration Immunity
Vibration: 4g, per IEC 60068-2-64.
Shock: 25g, per IEC 60068-2-27
Electromagnetic Compatibility (EMC) Compliance
Radiated Emissions: BS EN 61000-6-4, CISPR 16.
RFI: BS EN 61000-6-2, IEC 61000-4-3.
Conducted RFI: BS EN 61000-6-2, IEC 61000-4-6.
ESD: BS EN 61000-6-2, IEC 61000-4-2.
EFT: BS EN 61000-6-2, IEC 61000-4-4.
Surge Immunity: BS EN 61000-6-2, IEC 61000-4-5.
Approvals
CE compliant. UL/cUL Class I Div. 2 Zone 2.
■ Physical
General
General-purpose enclosure designed for mounting on
35mm “T-type” DIN rail.
Case Material
Self-extinguishing polyamide, UL94 V-0 rated, color
light gray. General-purpose NEMA Type 1 enclosure.
I/O Connectors
Removable plug-in terminal blocks rated for 12A/250V;
AWG #26-12, stranded or solid copper wire.
Dimensions
17.5 x 114.5 x 99.0 mm (0.7 x 4.51 x 3.90 inches).
Shipping Weight
0.22 kg (0.5 pounds) packed.
Ordering Information
Models
TT335-0700
Four-wire transmitter, isolated RTD/resistance input
Services
TT330-Config/Cal
Factory custom configuration/calibration service.
Specify input type, input/output zero and full-scale
values, filtering, and sensor fault settings on order.
Software
TTC-SIP (recommend one kit per customer)
Software Interface Package for Acromag TT Series
transmitters. Includes configuration software CD-ROM
(5040-944), isolator (USB-ISOLATOR) and two USB
cables (4001-112, 4001-113).
Accessories
See for more information.
USB-ISOLATOR
USB-to-USB isolator, includes USB cable (4001-112).
TTBUS-KIT
DIN rail bus power connector and left/right terminal
blocks. One kit supports multiple transmitters.
IMPORTANT: To prevent damage or errors
from grounded PCs and surges, Acromag
strongly recommends use of their USB-ISOLATOR
when configuring a TT330 Series transmitter.
248-295-0880 ■ 248-624-9234 ■ ■ ■ 30765
Wixom Rd, Wixom, MI 48393 USA
Transmitters: TT330 Series
Bulletin #8400-669c
Description
The TT336 model is a space-saving four-wire
transmitter that isolates and converts a DC
current or low voltage input to a proportional
control signal. DC current and voltage output are
both supported on a single model. An optional
DIN rail bus can deliver primary or redundant
power to multiple units without wiring.
High-voltage isolation separates the input from
the output circuit. Isolation protects from surges,
reduces noise, and eliminates ground loop errors.
Setup and calibration are fast and easy with
a convenient USB connection to your PC and
Acromag’s Windows configuration software.
Advanced signal processing capabilities, variable
range input, and convenient USB programming
make this instrument a very versatile temperature
measurement device. These transmitters can
withstand harsh industrial environments and
operate reliably across a wide temperature range
with very low drift. They feature RFI, EMI, ESD,
EFT, and surge protection plus low radiated
emissions.
Key Features & Benefits
■ Easy setup and digital calibration via USB with
Windows configuration software
■ Single unit supports unipolar and bipolar input
ranges up to ±20mA or ±500mV DC
■ Compatible with 0-20A AC sensor input
■ Universal output connections support ranges
up to ±21mA or ±10.5V DC without rewiring
■ Space-saving 17.5mm (0.7 inch) unit with
pluggable terminals for convenient wiring
■ High accuracy, linearity, stability, and reliability
■ User-selectable filtering (none, low, med., high)
■ Adjustable response times (10ms to 1200ms)
■ Supports reverse-acting (inverse) output
■ Bus power, local power, or both
■ Redundant power ready (rail/local)
■ 1500V input isolation, 3-way (power, input,
output)
■ Shock (25g) and vibration (4g) resistant
■ Mounts on Type T DIN-rail
■ Wide ambient operation (-40 to 80°C)
■ CE compliant. UL/cUL Class 1 Div 2 Zone 2
approvals
Multi-range ±20mA or ±500mV input ◆ Universal
current/voltage output ◆ 12-32V DC local/bus power
TT336 Current/millivolt input four-wire transmitter
9 8 7
12 11 10
BOTTOM VIEW
(INPUT SIDE)
TOP VIEW
(OUTPUT & POWER SIDE)
17.5 mm
(0.69 in.)
99.0 mm
(3.90 in.)
SIDE VIEW
INPUT
INPUT
OUTPUT
POWER
1
2
4
3 NC
5
114.5 mm
(4.51 in.)
TB1
TB2
TB3
TB4
CURRENT
(mA DC)
I
VOLTAGE
(V DC)
V V
SHIELDED
CABLE
SHIELDED
CABLE
+
–
+
–
+
–
OPTIONAL
GROUND
6 NC
2 1 3
5 4 6
+
–
DC SUPPLY
(12-32V DC)
EARTH
GROUND
+
–
12
11
10 –
FUSE
+
+
–
R
–
+
9
8
7
SHIELDED
CABLE
–
–
+
+
–
R
–
EARTH
GROUND
I
CURRENT
OUTPUT
VOLTAGE
OUTPUT
OPTIONAL
GROUND
RAIL BUS
POWER
35mm DIN Rail
Rail Bus Connector
#1005-063
TT300
Series
USB
TT300
Series
USB
TT300
Series
USB
TT300
Series
USB
TT300
Series
USB
TT300
Series
USB
TT330 Series Transmitter
Configuration Software
is downloadable (FREE)
from .
Windows® XP, Vista,
7, and 8
USB
Configured
TT336 Model software allows you to configure transmitters
offline,
save the file, and download into units later, at your
convenience.
The Agility™ Config Tool
is downloadable (FREE) at
the Google Play Store
For Android Devices only
248-295-0880 ■ 248-624-9234 ■ ■ ■ 30765
Wixom Rd, Wixom, MI 48393 USA
All trademarks are property of their respective owners.
Copyright © Acromag, Inc. 2015. Data subject to change
without notice. Printed in USA 5/2015
Transmitters: TT330 Series
TT336 Current/millivolt input four-wire transmitter
Performance Specifications
■ USB Interface
USB Connector
USB Mini-B type socket, 5-pin.
USB Data Rate
12Mbps. USB v1.1 and 2.0 compatible.
USB Transient Protection
Transient voltage suppression on power and data lines.
USB Cable Length
5.0 meters maximum.
Driver
Not required. Uses built-in Human Interface Device
(HID) USB drivers of the Windows operating system.
■ Input
Default Configuration/Calibration
Input: 4 to 20mA, medium filter.
Output: 4 to 20mA.
Input Ranges and Accuracy
Range Accuracy
±500mV
0 to 500mV
±20mA
0 to 20mA
4 to 20mA
0 to 11.17mA (for AC sensor)
±1mA
±0.05% of span
±0.05% of span
±0.05% of span
±0.05% of span
±0.05% of span
±0.05% of span
±0.05% of span
Error includes the effects of repeatability, terminal
point conformity, and linearization.
Ambient Temperature Effect
Better than ±80ppm/°C (±0.008%/°C).
Zero Scaling Adjust
0 to 95% of range, typical.
Full Scale Adjust
5 to * of full scale range, typical.
Input Over-Voltage Protection
Bipolar Transient Voltage Suppressers (TVS),
5.6V clamp level typical.
Input Resolution
Bipolar input: 1 part in 50000 (±25000)
Unipolar input: 1 part in 25000
Input Impedance
Current input: 24.9 ohms.
Voltage input: 15M ohms
Input Filter
Selectable digital filtering settings (none, low, medium,
and high).
Noise Rejection
Normal mode @ 60Hz:
>4dB (no filter), >80dB (high filter)
Common mode @ 60Hz:
>90dB (no filter), >120dB (high filter)
■ Output
Output Range
Range Over-Range Resolution
±10V
±5V
0 to 10V
0 to 5V
±20mA
0 to 20mA
4 to 20mA
±10.5V
±5V
–0.5527 to +10.5V
–0.27634 to +5.25V
±21mA
–1.1054 to 21mA
–1.1054 to 21mA
1 part in 62415
1 part in 31208
1 part in 59240
1 part in 60262
1 part in 62259
1 part in 59596
1 part in 46877
Output Load
Voltage output: 1K ohms minimum.
Current output: 0-550 ohms.
Output Response Time (for step input change)
Time to reach 98% of final output value (typical)
TB1 (±20mA) TB2 (±500mV)
No filter
Low filter
10 milliseconds
34 milliseconds
15 milliseconds
45 milliseconds
Medium filter 136 milliseconds 120 milliseconds
High filter 1168 milliseconds 1072milliseconds
Output Ripple
Less than ±0.1% of output span.
Output Ambient Temperature Drift
Better than ±80ppm/°C (±0.0080%/°C.
■ Environmental
Operating temperature
-40 to 80°C (-40° to 176°F).
Storage temperature
-40 to 85°C (-40 to 185°F).
Relative humidity
5 to 95% non-condensing.
Power Requirement
12-32V DC SELV (Safety Extra Low Voltage),
24mA max.
Isolation
1500V AC peak. 250V AC (354V DC) continuous
isolation between input, output, and power (3-way).
Shock and Vibration Immunity
Vibration: 5g, per IEC 60068-2-64.
Shock: 50g, per IEC 60068-2-27
Approvals
CE compliant. UL/cUL listing.
Designed for Class I; Division 2; Groups ABCD; Zone 2.
Electromagnetic Compatibility (EMC) Compliance
Radiated Emissions: BS EN 61000-6-4, CISPR 16.
RFI: BS EN 61000-6-2, IEC 61000-4-3.
Conducted RFI: BS EN 61000-6-2, IEC 61000-4-6.
ESD: BS EN 61000-6-2, IEC 61000-4-2.
EFT: BS EN 61000-6-2, IEC 61000-4-4.
Surge Immunity: BS EN 61000-6-2, IEC 61000-4-5.
■ Physical
General
General-purpose enclosure designed for mounting on
35mm “T-type” DIN rail.
Case Material
Self-extinguishing polyamide, UL94 V-0 rated, color
light gray. General-purpose NEMA Type 1 enclosure.
I/O Connectors
Removable plug-in terminal blocks rated for 12A/250V;
AWG #26-12, stranded or solid copper wire.
Dimensions
17.5 x 114.5 x 99.0 mm (0.7 x 4.51 x 3.90 inches).
Shipping Weight
0.22 kg (0.5 pounds) packed.
Ordering Information
Models
TT336-0700
Four-wire transmitter, current/millivolt input.
Services
TT330-Config/Cal
Factory custom configuration/calibration service.
Specify input type, input/output zero and full-scale
values, filtering, and sensor fault settings on order.
Software
TTC-SIP (recommend one kit per customer)
Software Interface Package for Acromag TT Series
transmitters. Includes configuration software CD-ROM
(5040-944), isolator (USB-ISOLATOR) and two USB
cables (4001-112, 4001-113).
Accessories
See for more information.
USB-ISOLATOR
USB-to-USB isolator, includes USB cable (4001-112).
TTBUS-KIT
DIN rail bus power connector and left/right terminal
blocks. One kit supports multiple transmitters.
5020-350
AC current sensor (toroidal transformer);
converts 0-20A AC to 0-11.17mA DC.
IMPORTANT: To prevent damage or errors
from grounded PCs and surges, Acromag
strongly recommends use of their USB-ISOLATOR
when configuring a TT330 Series transmitter.
248-295-0880 ■ 248-624-9234 ■ ■ ■ 30765
Wixom Rd, Wixom, MI 48393 USA
Transmitters: TT330 Series
Bulletin #8400-670d
Description
The TT337 model is a space-saving four-wire
transmitter that isolates and converts a process
level DC voltage input to a proportional control
signal. DC current and voltage output are both
supported on a single model. An optional DIN rail
bus can deliver primary or redundant power to
multiple units without wiring.
High-voltage isolation separates the input from
the output circuit. Isolation protects from surges,
reduces noise, and eliminates ground loop errors.
Setup and calibration are fast and easy with
a convenient USB connection to your PC and
Acromag’s Windows configuration software.
Advanced signal processing capabilities, variable
range input, and convenient USB programming
make this instrument a very versatile temperature
measurement device. These transmitters can
withstand harsh industrial environments and
operate reliably across a wide temperature range
with very low drift. They feature RFI, EMI, ESD,
EFT, and surge protection plus low radiated
emissions.
Key Features & Benefits
■ Easy setup and digital calibration via USB with
Windows configuration software
■ Single unit supports ±1V, ±5V, and ±10V DC
input ranges
■ Universal output connections support ranges
up to ±21mA or ±10.5V DC without rewiring
■ Space-saving 17.5mm (0.7 inch) unit with
pluggable terminals for convenient wiring
■ High accuracy, linearity, stability, and reliability
■ User-selectable filtering (none, low, med., high)
■ Adjustable response times (12ms to 1200ms)
■ Supports reverse-acting (inverse) output
■ Bus power, local power, or both
■ Redundant ready power
■ 1500V input isolation
■ Shock (25g) and vibration (4g) resistant
■ Mounts on Type T DIN-rail
■ Wide ambient operation (-40 to 80°C)
■ CE compliant. UL/cUL Class 1 Div 2 Zone 2
approvals
Multi-range ±1V, ±5V, or ±10V input ◆ Universal
current/voltage output ◆ 12-32V DC local/bus power
TT337 Process voltage input four-wire transmitter
9 8 7
12 11 10
BOTTOM VIEW
(INPUT SIDE)
TOP VIEW
(OUTPUT & POWER SIDE)
17.5 mm
(0.69 in.)
99.0 mm
(3.90 in.)
SIDE VIEW
OUTPUT
POWER
114.5 mm
(4.51 in.)
TB1
TB2
TB3
TB4
2 1 3
5 4 6
+
–
DC SUPPLY
(12-32V DC)
EARTH
GROUND
+
–
12
11
10 –
FUSE
+
+
–
R
–
+
9
8
7
SHIELDED
CABLE
–
–
+
+
–
R
–
EARTH
GROUND
I
CURRENT
OUTPUT
VOLTAGE
OUTPUT
OPTIONAL
GROUND
RAIL BUS
POWER
35mm DIN Rail
Rail Bus Connector
#1005-063
TT300
Series
USB
TT300
Series
USB
TT300
Series
USB
TT300
Series
USB
TT300
Series
USB
TT300
Series
USB
INPUT
INPUT
1
2
4
3 NC
5
VOLTAGE
(±1V DC)
VOLTAGE
(±5V DC,
±10V DC)
V V
V
SHIELDED
CABLE
SHIELDED
CABLE
+
–
+
–
+
–
OPTIONAL
GROUND
6 NC
TT330 Series Transmitter
Configuration Software
is downloadable (FREE)
from .
Windows® XP, Vista,
7, and 8
USB
Configured
TT337 Model software allows you to configure transmitters
offline,
save the file, and download into units later, at your
convenience.
The Agility™ Config Tool
is downloadable (FREE) at
the Google Play Store
For Android Devices only
248-295-0880 ■ 248-624-9234 ■ ■ ■ 30765
Wixom Rd, Wixom, MI 48393 USA
All trademarks are property of their respective owners.
Copyright © Acromag, Inc. 2015. Data subject to change
without notice. Printed in USA 5/2015
Transmitters: TT330 Series
TT337 Process voltage input four-wire transmitter
Performance Specifications
■ USB Interface
USB Connector
USB Mini-B type socket, 5-pin.
USB Data Rate
12Mbps. USB v1.1 and 2.0 compatible.
USB Transient Protection
Transient voltage suppression on power and data lines.
USB Cable Length
5.0 meters maximum.
Driver
Not required. Uses built-in Human Interface Device
(HID) USB drivers of the Windows operating system.
■ Input
Default Configuration/Calibration
Input: ±10V, medium filter.
Output: 4 to 20mA.
Input Ranges and Accuracy
Range Accuracy
±1V DC
±5V DC
±10V DC
±0.05% of span
±0.05% of span
±0.05% of span
Error includes the effects of repeatability, terminal
point conformity, and linearization.
Ambient Temperature Effect
Better than ±80ppm/°C (±0.008%/°C).
Zero Scaling Adjust
0 to 95% of range, typical.
Full Scale Adjust
5 to * of full scale range, typical.
Input Over-Voltage Protection
Bipolar Transient Voltage Suppressers (TVS),
14V working and 18V clamp level typical.
Input Resolution
Bipolar input: 1 part in 50000 (±25000)
Unipolar input: 1 part in 25000
Input Impedance
±1V input: 15M ohms.
±5V input: >1M ohms.
±10V input: >1M ohms.
Input Filter
Selectable digital filtering settings (none, low, medium,
and high).
Noise Rejection
Normal mode @ 60Hz:
>1dB (no filter), >80dB (high filter)
Common mode @ 60Hz:
>80dB (no filter), >120dB (high filter)
■ Output
Output Range
Range Over-Range Resolution
±10V
±5V
0 to 10V
0 to 5V
±20mA
0 to 20mA
4 to 20mA
±10.5V
±5V
–0.5527 to +10.5V
–0.27634 to +5.25V
±21mA
–1.1054 to 21mA
–1.1054 to 21mA
1 part in 62415
1 part in 31208
1 part in 59293
1 part in 59293
1 part in 62415
1 part in 59293
1 part in 47434
Output Load
Voltage output: 1K ohms minimum.
Current output: 0-550 ohms.
Output Response Time (for step input change)
Time to reach 98% of final output value (typical)
TB1 (±1V) TB2 (±5V, ±10V)
No filter
Low filter
12 milliseconds
28 milliseconds
78 milliseconds
98 milliseconds
Medium filter 115 milliseconds 208 milliseconds
High filter 1116 milliseconds 1164 milliseconds
Output Ripple
Less than ±0.1% of output span.
Output Ambient Temperature Drift
Better than ±80ppm/°C (±0.0080%/°C.
■ Environmental
Operating temperature
-40 to 80°C (-40° to 176°F).
Storage temperature
-40 to 85°C (-40 to 185°F).
Relative humidity
5 to 95% non-condensing.
Power Requirement
12-32V DC SELV (Safety Extra Low Voltage),
24mA max.
Isolation
1500V AC peak. 250V AC (354V DC) continuous
isolation between input, output, and power (3-way).
Shock and Vibration Immunity
Vibration: 5g, per IEC 60068-2-64.
Shock: 50g, per IEC 60068-2-27
Approvals
CE compliant. UL/cUL listing.
Designed for Class I; Division 2; Groups ABCD; Zone 2.
Electromagnetic Compatibility (EMC) Compliance
Radiated Emissions: BS EN 61000-6-4, CISPR 16.
RFI: BS EN 61000-6-2, IEC 61000-4-3.
Conducted RFI: BS EN 61000-6-2, IEC 61000-4-6.
ESD: BS EN 61000-6-2, IEC 61000-4-2.
EFT: BS EN 61000-6-2, IEC 61000-4-4.
Surge Immunity: BS EN 61000-6-2, IEC 61000-4-5.
■ Physical
General
General-purpose enclosure designed for mounting on
35mm “T-type” DIN rail.
Case Material
Self-extinguishing polyamide, UL94 V-0 rated, color
light gray. General-purpose NEMA Type 1 enclosure.
I/O Connectors
Removable plug-in terminal blocks rated for 12A/250V;
AWG #26-12, stranded or solid copper wire.
Dimensions
17.5 x 114.5 x 99.0 mm (0.7 x 4.51 x 3.90 inches).
Shipping Weight
0.22 kg (0.5 pounds) packed.
Ordering Information
Models
TT337-0700
Four-wire transmitter, process voltage input.
Services
TT330-Config/Cal
Factory custom configuration/calibration service.
Specify input type, input/output zero and full-scale
values, filtering, and sensor fault settings on order.
Software
TTC-SIP (recommend one kit per customer)
Software Interface Package for Acromag TT Series
transmitters. Includes configuration software CD-ROM
(5040-944), isolator (USB-ISOLATOR) and two USB
cables (4001-112, 4001-113).
Accessories
See for more information.
USB-ISOLATOR
USB-to-USB isolator, includes USB cable (4001-112).
TTBUS-KIT
DIN rail bus power connector and left/right terminal
blocks. One kit supports multiple transmitters.
IMPORTANT: To prevent damage or errors
from grounded PCs and surges, Acromag
strongly recommends use of their USB-ISOLATOR
when configuring a TT330 Series transmitter.
248-295-0880 ■ 248-624-9234 ■ ■ ■ 30765
Wixom Rd, Wixom, MI 48393 USA
Transmitters: TT330 Series
Bulletin #8400-671e
Description
The TT338 model is a space-saving four-wire
transmitter that isolates and converts a high
level DC voltage input to a proportional control
signal. DC current and voltage output are both
supported on a single model. An optional DIN rail
bus can deliver primary or redundant power to
multiple units without wiring.
High-voltage isolation separates the input from
the output circuit. Isolation protects from surges,
reduces noise, and eliminates ground loop errors.
Setup and calibration are fast and easy with
a convenient USB connection to your PC and
Acromag’s Windows configuration software.
Advanced signal processing capabilities, variable
range input, and convenient USB programming
make this instrument a very versatile temperature
measurement device. These transmitters can
withstand harsh industrial environments and
operate reliably across a wide temperature range
with very low drift. They feature RFI, EMI, ESD,
EFT, and surge protection plus low radiated
emissions.
Key Features & Benefits
■ Easy setup and digital calibration via USB with
Windows configuration software
■ Single unit supports ±15V, ±75V, and ±150V
DC input ranges
■ Universal output connections support ranges
up to ±21mA or ±10.5V DC without rewiring
■ Space-saving 17.5mm (0.7 inch) unit with
pluggable terminals for convenient wiring
■ High accuracy, linearity, stability, and reliability
■ User-selectable filtering (none, low, med., high)
■ Adjustable response times (50ms to 1200ms)
■ Supports reverse-acting (inverse) output
■ Bus power, local power, or both
■ Redundant ready power
■ 1500V input isolation
■ Shock (25g) and vibration (4g) resistant
■ Mounts on Type T DIN-rail
■ Wide ambient operation (-40 to 80°C)
■ CE compliant. UL/cUL Class 1 Div 2 Zone 2
approvals
Multi-range ±15, ±75, or ±150V input ◆ Universal
current/voltage output ◆ 12-32V DC local/bus power
TT338 High voltage input four-wire transmitter
9 8 7
12 11 10
BOTTOM VIEW
(INPUT SIDE)
TOP VIEW
(OUTPUT & POWER SIDE)
17.5 mm
(0.69 in.)
99.0 mm
(3.90 in.)
SIDE VIEW
OUTPUT
POWER
114.5 mm
(4.51 in.)
TB1
TB2
TB3
TB4
2 1 3
5 4 6
+
–
DC SUPPLY
(12-32V DC)
EARTH
GROUND
+
–
12
11
10 –
FUSE
+
+
–
R
–
+
9
8
7
SHIELDED
CABLE
–
–
+
+
–
R
–
EARTH
GROUND
I
CURRENT
OUTPUT
VOLTAGE
OUTPUT
OPTIONAL
GROUND
RAIL BUS
POWER
35mm DIN Rail
Rail Bus Connector
#1005-063
TT300
Series
USB
TT300
Series
USB
TT300
Series
USB
TT300
Series
USB
TT300
Series
USB
TT300
Series
USB
INPUT
INPUT
1
2
4
3 NC
5
VOLTAGE
(±15V DC)
V V
V
SHIELDED
CABLE
SHIELDED
CABLE
+
–
+
–
+
–
OPTIONAL
GROUND
6 NC
VOLTAGE
(±75V DC,
±150V DC)
TT330 Series Transmitter
Configuration Software
is downloadable (FREE)
from .
Windows® XP, Vista,
7, and 8
USB
Configured
TT338 Model software allows you to configure transmitters
offline,
save the file, and download into units later, at your
convenience.
The Agility™ Config Tool
is downloadable (FREE) at
the Google Play Store
For Android Devices only
248-295-0880 ■ 248-624-9234 ■ ■ ■ 30765
Wixom Rd, Wixom, MI 48393 USA
All trademarks are property of their respective owners.
Copyright © Acromag, Inc. 2015. Data subject to change
without notice. Printed in USA 5/2015
Transmitters: TT330 Series
TT338 High voltage input four-wire transmitter
Performance Specifications
■ USB Interface
USB Connector
USB Mini-B type socket, 5-pin.
USB Data Rate
12Mbps. USB v1.1 and 2.0 compatible.
USB Transient Protection
Transient voltage suppression on power and data lines.
USB Cable Length
5.0 meters maximum.
Driver
Not required. Uses built-in Human Interface Device
(HID) USB drivers of the Windows operating system.
■ Input
Default Configuration/Calibration
Input: ±15V, medium filter.
Output: 4 to 20mA.
Input Ranges and Accuracy
Range Accuracy
±15V DC
±75V DC
±150V DC
±0.05% of span
±0.05% of span
±0.05% of span
Error includes the effects of repeatability, terminal
point conformity, and linearization.
Ambient Temperature Effect
Better than ±80ppm/°C (±0.008%/°C).
Zero Scaling Adjust
0 to 95% of range, typical.
Full Scale Adjust
5 to * of full scale range, typical.
Input Over-Voltage Protection
Bipolar Transient Voltage Suppressers (TVS),
220V working typical.
Input Resolution
Bipolar input: 1 part in 50000 (±25000)
Unipolar input: 1 part in 25000
Input Impedance
Greater than 1M ohms.
Input Filter
Selectable digital filtering settings (none, low, medium,
and high).
Noise Rejection
Normal mode @ 60Hz:
>15dB (no filter), >80dB (high filter)
Common mode @ 60Hz:
>70B (no filter), >120dB (high filter)
■ Output
Output Range
Range Over-Range Resolution
±10V
±5
0 to 10V
0 to 5V
±20mA
0 to 20mA
4 to 20mA
±10.5V
±5V
–0.5527 to +10.5V
–0.27634 to +5.25V
±21mA
–1.1054 to 21mA
–1.1054 to 21mA
1 part in 62415
1 part in 31208
1 part in 59293
1 part in 59293
1 part in 62415
1 part in 59293
1 part in 47434
Output Load
Voltage output: 1K ohms minimum.
Current output: 0-525 ohms.
Output Response Time (for step input change)
Time to reach 98% of final output value (typical)
TB1 (±15V) TB2 (±75V,±150V)
No filter
Low filter
49 milliseconds
69 milliseconds
49 milliseconds
68 milliseconds
Medium filter 175 milliseconds 152 milliseconds
High filter 1164 milliseconds 944 milliseconds
Output Ripple
Less than ±0.1% of output span.
Output Ambient Temperature Drift
Better than ±80ppm/°C (±0.0080%/°C.)
■ Environmental
Operating temperature
-40 to 80°C (-40° to 176°F).
Storage temperature
-40 to 85°C (-40 to 185°F).
Relative humidity
5 to 95% non-condensing.
Power Requirement
12-32V DC SELV (Safety Extra Low Voltage),
24mA max.
Isolation
1500V AC peak. 250V AC (354V DC) continuous
isolation between input, output, and power (3-way).
Shock and Vibration Immunity
Vibration: 5g, per IEC 60068-2-64.
Shock: 50g, per IEC 60068-2-27
Approvals
CE compliant. UL/cUL listing.
Designed for Class I; Division 2; Groups ABCD; Zone 2.
Electromagnetic Compatibility (EMC) Compliance
Radiated Emissions: BS EN 61000-6-4, CISPR 16.
RFI: BS EN 61000-6-2, IEC 61000-4-3.
Conducted RFI: BS EN 61000-6-2, IEC 61000-4-6.
ESD: BS EN 61000-6-2, IEC 61000-4-2.
EFT: BS EN 61000-6-2, IEC 61000-4-4.
Surge Immunity: BS EN 61000-6-2, IEC 61000-4-5.
■ Physical
General
General-purpose enclosure designed for mounting on
35mm “T-type” DIN rail.
Case Material
Self-extinguishing polyamide, UL94 V-0 rated, color
light gray. General-purpose NEMA Type 1 enclosure.
I/O Connectors
Removable plug-in terminal blocks rated for 12A/250V;
AWG #26-12, stranded or solid copper wire.
Dimensions
17.5 x 114.5 x 99.0 mm (0.7 x 4.51 x 3.90 inches).
Shipping Weight
0.22 kg (0.5 pounds) packed.
Ordering Information
Models
TT338-0700
Four-wire transmitter, high voltage input.
Services
TT330-Config/Cal
Factory custom configuration/calibration service.
Specify input type, input/output zero and full-scale
values, filtering, and sensor fault settings on order.
Software
TTC-SIP (recommend one kit per customer)
Software Interface Package for Acromag TT Series
transmitters. Includes configuration software CD-ROM
(5040-944), isolator (USB-ISOLATOR) and two USB
cables (4001-112, 4001-113).
Accessories
See for more information.
USB-ISOLATOR
USB-to-USB isolator, includes USB cable (4001-112).
TTBUS-KIT
DIN rail bus power connector and left/right terminal
blocks. One kit supports multiple transmitters.
IMPORTANT: To prevent damage or errors
from grounded PCs and surges, Acromag
strongly recommends use of their USB-ISOLATOR
when configuring a TT330 Series transmitter.
248-295-0880 ■ 248-624-9234 ■ ■ ■ 30765
Wixom Rd, Wixom, MI 48393 USA
Transmitters: TT330 Series
Bulletin #8400-672e
Description
The TT339 model is a space-saving four-wire
transmitter that isolates and converts frequency,
pulse, or pulse-width modulation (PWM) input
to a proportional control signal. DC current and
voltage output are both supported on a single
model. An optional DIN rail bus can deliver
primary or redundant power to multiple units
without wiring.
High-voltage isolation separates the input from
the output circuit. Isolation protects from surges,
reduces noise, and eliminates ground loop errors.
Setup and calibration are fast and easy with
a convenient USB connection to your PC and
Acromag’s Windows configuration software.
Advanced signal processing capabilities, variable
range input, and convenient USB programming
make this instrument a very versatile frequency
measurement device. These transmitters can
withstand harsh industrial environments and
operate reliably across a wide temperature range
with very low drift. They feature RFI, EMI, ESD,
EFT, and surge protection plus low radiated
emissions.
Amplifier applications include:
• Speed pickup
• Line frequency monitoring
• Turbine flowmeter interface
• PWM sensing/feedback circuits
• Shaft encoder interface
Key Features & Benefits
■ Easy setup and digital calibration via USB with
Windows configuration software
■ Measures frequency or duty cycle and
interfaces many input types up to 100KHz
■ Accepts input amplitudes up to 120V rms
(±170V DC, unipolar or bipolar)
■ Adjustable 0Hz cut-off, sample averaging,
debounce, and output update time
■ Universal output connections support ranges
up to ±21mA or ±10.5V DC without rewiring
■ Supports normal or reverse-acting output
■ Fast response time and high accuracy
■ Space-saving 17.5mm (0.7 inch) unit with
pluggable terminals for convenient wiring
■ Redundant power ready (rail/local)
■ 1500V isolation, 3-way (power, input, output)
■ Shock (25g) and vibration (4g) resistant
■ Mounts on Type T DIN-rail
■ Wide ambient operation (-40 to 80°C)
■ CE Compliant and UL/cUL Class 1 Div 2 Zone 2
approvals
Multi-range frequency/pulse input ◆ Universal
current/voltage output ◆ 12-32V DC local/bus power
TT339 Frequency/pulse/PWM input four-wire transmitter
9 8 7
12 11 10
BOTTOM VIEW
(INPUT SIDE)
TOP VIEW
(OUTPUT & POWER SIDE)
17.5 mm
(0.69 in.)
99.0 mm
(3.90 in.)
SIDE VIEW
OUTPUT
POWER
1
2
4
3
5
114.5 mm
(4.51 in.)
TB1
TB2
TB3
TB4
+IN
–RTN
COM
COM
+EXC
COM
+
6
2 1 3
5 4 6
+
–
DC SUPPLY
(12-32V DC)
EARTH
GROUND
+
–
12
11
10 –
FUSE
+
+
–
R
–
+
9
8
7
SHIELDED
CABLE
–
–
+
+
–
R
–
EARTH
GROUND
I
CURRENT
OUTPUT
VOLTAGE
OUTPUT
OPTIONAL
GROUND
RAIL BUS
POWER
35mm DIN Rail
Rail Bus Connector
#1005-063
TT300
Series
USB
TT300
Series
USB
TT300
Series
USB
TT300
Series
USB
TT300
Series
USB
TT300
Series
USB
–
Frequency/Pulse Input
MAG PICKUP
ENCODER
LINE FREQ
TTL/PNP/NPN
DRY CONTACT
2/3-WIRE PROX SWITCH
TURBINE FLOWMETER
PULSE UNI/BIPOLAR
PWM/DUTY CYCLE
TT330 Series Transmitter
Configuration Software is
downloadable (FREE) from
.
Windows® XP, Vista, 7, 8
USB
Configured
TT339 Model software allows you to configure
transmitters offline, save the file, and download into
units later, at your convenience.
248-295-0880 ■ 248-624-9234 ■ ■ ■ 30765
Wixom Rd, Wixom, MI 48393 USA
All trademarks are property of their respective owners.
Copyright © Acromag, Inc. 2013. Data subject to change
without notice. Printed in USA 10/2013
Transmitters: TT330 Series
TT339 Frequency/pulse/PWM input four-wire transmitter
Performance Specifications
■ USB Interface
USB Connector
USB Mini-B type socket, 5-pin.
USB Data Rate
12Mbps. USB v1.1 and 2.0 compatible.
USB Transient Protection
Transient voltage suppression on power and data lines.
USB Cable Length
5.0 meters maximum.
Driver
Not required. Uses built-in Human Interface Device
(HID) USB drivers of the Windows operating system.
■ Input
Default Configuration/Calibration
±5.0V Square Wave; Input Threshold = Bipolar 0.0V;
Hysteresis ±25mV; Pull Up/Down = Disabled; Excitation
= Enabled; 0Hz Cutoff = 0.5Hz; Sample Average = 1;
Output Range = 4-20mA; I/O Scaling = 0Hz to 10KHz,
Normal Acting; Output Update = 100ms.
Frequency Input
Configurable for any range from 0Hz to 100KHz.
Accepts unipolar (non-zero crossing) or bipolar
(zero crossing) input signals. 0.5Hz minimum span.
1µs minimum pulse width.
Duty Cycle Input
Carrier frequency range: Any range from 0 to 20KHz.
Duty cycle range: 1 to 99%, depending on freq. range.
Input Scaling Adjust
Zero: Adjustable over 0 to 99% of full-scale input.
Full scale: Adjustable over 0.5Hz to 100KHz.
Cut-off frequency: Adjustable over 0.01Hz to 100KHz.
Unipolar Signal Configuration:
Amplitude: 0 to 3V DC min., 0 to 170V DC max.
Thresholds: Configurable for 1.6V DC (±25mV
hysteresis) or 5V DC (±83mV hysteresis), typical.
Bipolar Signal Configuration:
Amplitude: ±50 to ±200mV min. (depending on range
and hysteresis), 120V rms max. (±170V DC).
Thresholds: 0mV nominal (±25 or ±83mV hysteresis).
Input Pull-up/Pull-down (Internal)
Software-selectable 2.7KΩ input pull-up to +5V and a
1KΩ input pull-down to –FRTN, or disabled. 15V DC
maximum input when used.
Input Excitation Supply
+5V DC, current limited to +20mA typical.
Input Filter Bandwidth
-3dB at 35KHz, typical.
Input Impedance
37.2K ohms, typical.
Noise Rejection
Normal mode @ 60Hz: Not applicable.
Common mode @ 60Hz: 90dB.
■ Output
Output Range
Range Over-Range Resolution
±10V
±5V
0 to 10V
0 to 5V
±20mA
0 to 20mA
4 to 20mA
±10.5V
±5.25V
–0.5527 to +10.5V
–0.27634 to +5.25V
±21mA
–1.1054 to +21mA
–1.1054 to +21mA
1 part in 62558
1 part in 31278
1 part in 59293
1 part in 60414
1 part in 62400
1 part in 58732
1 part in 46984
Output Load
Voltage output: 1000 ohms minimum.
Current output: 525 ohms maximum.
Output Update
Software configurable from 10 to 5000ms. Determines
rate at which output signal updates, unless optionally
overridden by the 0Hz cutoff setting.
Output Accuracy
Better than ±0.05% of span, typical (±0.1% max.)
for for nominal input spans. Includes the effects
of repeatability, terminal point conformity, and
linearization, but does not include sensor error.
Output Ripple
Less than ±0.1% of output span.
Output Ambient Temperature Drift
Better than ±40ppm/°C (±0.0040%/°C).
■ Environmental
Operating temperature
-40 to 80°C (-40° to 176°F).
Storage temperature
-40 to 85°C (-40 to 185°F).
Relative humidity
5 to 95% non-condensing.
Power Requirement
12-32V DC SELV (Safety Extra Low Voltage), 24mA max.
Isolation
1500V AC peak. 250V AC (354V DC) continuous
isolation between input, output, and power (3-way).
Shock and Vibration Immunity
Vibration: 4g, per IEC 60068-2-64.
Shock: 25g, per IEC 60068-2-27
Approvals
CE compliant. UL/cUL Class I Div. 2 Zone 2.
Electromagnetic Compatibility (EMC) Compliance
Radiated Emissions: BS EN 61000-6-4, CISPR 16.
RFI: BS EN 61000-6-2, IEC 61000-4-3.
Conducted RFI: BS EN 61000-6-2, IEC 61000-4-6.
ESD: BS EN 61000-6-2, IEC 61000-4-2.
EFT: BS EN 61000-6-2, IEC 61000-4-4.
Surge Immunity: BS EN 61000-6-2, IEC 61000-4-5.
■ Physical
General
General-purpose enclosure designed for mounting on
35mm “T-type” DIN rail.
Case Material
Self-extinguishing polyamide, UL94 V-0 rated, color
light gray. General-purpose NEMA Type 1 enclosure.
I/O Connectors
Removable plug-in terminal blocks rated for 12A/250V;
AWG #26-12, stranded or solid copper wire.
Dimensions
17.5 x 114.5 x 99.0 mm (0.7 x 4.51 x 3.90 inches).
Shipping Weight
0.22 kg (0.5 pounds) packed.
Ordering Information
Models
TT339-0700
Transmitter, isolated frequency/pulse/PWM input
Services
TT330-Config/Cal
Factory custom configuration/calibration service.
Specify input type, input/output zero and full-scale
values, filtering, and sensor fault settings on order.
Software
TTC-SIP (recommend one kit per customer)
Software Interface Package for Acromag TT Series
transmitters. Includes configuration software CD-ROM
(5040-944), isolator (USB-ISOLATOR) and two USB
cables (4001-112, 4001-113).
Accessories
See for more information.
USB-ISOLATOR
USB-to-USB isolator, includes USB cable (4001-112).
TTBUS-KIT
DIN rail bus power connector and left/right terminal
blocks. One kit supports multiple transmitters.
IMPORTANT: To prevent damage or errors
from grounded PCs and surges, Acromag
strongly recommends use of their USB-ISOLATOR
when configuring a TT330 Series transmitter.
248-295-0880 I 248-624-9234 I I I 30765 Wixom
Rd, Wixom, MI 48393 USA
Transmitters: TT Series
Bulletin #8400-836
The Agility™ Config Tool is a
application that allows easy setup and
configuration of Acromag TT Series
transmitters via a tethered device.
This free app is available for Android
devices at the Google Play store
at Acromag Agility™ Config Tool.
Acromag Agility™ Config Tool Application
Key Features & Benefits
I Connects to Acromag TT Series transmitters
(except models TT231 and TT233)
I Requires the use of USB OTG Cable
(Acromag part #: 5028-565) and USB A to
Mini B Cable (Acromag part #: 4001-113)
I Configures and calibrates TT Series products
via phone or tablet running Android 4.0 ICS
(Ice Cream Sandwich) or later.
I View wiring diagrams, even without an
internet connection
I Perform quick and easy field diagnostics and
troubleshooting
I Ideal for field technicians
With a couple of taps, quickly configure input, output,
unit and scaling options.
Quick and easy access to the wiring diagram, even offline
without internet access.
248-295-0880 ■ 248-624-9234 ■ ■ ■ 30765
Wixom Rd, Wixom, MI 48393 USA
Accessories
Bulletin #8400-742c
Description
This compact, industrial-grade isolator provides
a high-voltage isolation barrier between a
computer and a connected USB device. The
isolation protects equipment from electrical
surges and transient voltage spikes. It also
eliminates ground loop currents flowing between
the PC and peripherals which can cause damage
and inaccurate measurements. Additionally,
isolation minimizes conducted noise from static
discharge, magnetic fields, and radio frequency
interference.
Acromag’s USB isolator is very easy to use. The
isolator inserts in-line with the USB connection
and operates transparently. No special software
drivers are required. The unit receives power from
the PC’s USB port and isolates that power to the
connected device. High noise immunity and low
radiated emissions ensure reliable data transfer in
sensitive applications.
A number of high-performance features help
provide convenient and dependable operation.
The green LED indicates that power is being
received and blinks if the connected device draws
too much current. An internal jumper lets you
switch from Full Speed (12 Mbps) to Low Speed
(1.5 Mbps) communication. The reset button
offers a simple way to reinitialize a connected
device without breaking the cable connection.
High-retention USB sockets keep cables securely
attached under shock and vibration.
Key Features & Benefits
■ Isolates and protects a USB peripheral from a
USB host
■ Electrical isolation up to 1500V AC / 2100V DC
■ Common mode filtering on all data lines
■ Built-in surge/transient suppression up to 8kV
on all ports
■ Self-powered through the USB port
■ Supports USB 2.0 full speed (12 Mbps) and
USB 1.1 low speed (1.5 Mbps) data rates with
jumper-selection
■ LED for power indication and diagnostics
■ Reset button to reinitialize and re-enumerate
peripheral devices
■ Output short circuit protection with auto-retry
■ No software or configuration required
(transparent operation)
■ Uses standard high-retention USB Type A/B
cable connections (includes 1m cable)
■ Compact size and rugged design for harsh
environments
■ Wide ambient temperature operation
-40 to 70°C (-40 to 158°F)
■ CE, FCC, UL/cUL approvals
Ordering Information
Models
USB-ISOLATOR
USB isolator, includes USB cable (Part # 4001-112) for
isolator-to-PC connection
TTC-SIP
CD-ROM (Part #5040-944), USB isolator and two USB
cables (Part # 4001-112, 4001-113) for configuration
of Acromag TT Series transmitters
Accessories
4001-112
USB cable, 1 meter, with Type A to Type B plugs
4001-113
USB cable, 1 meter, with Type A to Mini-B plugs
USB-powered, USB 2.0 and 1.1 compatible ◆ 1500V AC /
2100V DC isolation ◆ No drivers required
USB-ISOLATOR USB-to-USB Isolator
DEVICE
CONNECT
PC
CONNECT
POWER
RESET
CONNECTION
MODEL: USB-ISOLATOR
1.85” (46.99mm)
0.93” (23.50mm) 2.40” (60.96mm)
2 1
3 4
3 4 1 2
USB
TYPE B
USB
TYPE A
LEFT SIDE TOP VIEW RIGHT SIDE
248-295-0880 ■ 248-624-9234 ■ ■ ■ 30765
Wixom Rd, Wixom, MI 48393 USA
All trademarks are property of their respective owners.
Copyright © Acromag, Inc. 2013. Data subject to change
without notice. Printed in USA 12/2013
Accessories
USB-ISOLATOR USB-to-USB Isolator
Performance Specifications
■ USB Port Interface
Standards
USB 1.1 and 2.0 compatible, full speed (12Mbps,
default) and low speed (1.5Mbps) data rates
supported. For low speed data rates, an internal
jumper is provided for user setting. Connection is
transparent, no software or configuration is required.
Isolator will not be enumerated in the device manager.
■ Physical
Dimensions
2.40” Length x 1.85” Wide x 0.925” High
(60.96mm x 46.99mm x 23.495mm).
Connectors
Standard high retention USB A/B connectors with
minimum withdrawal force of 15 Newtons. 1 meter
A/B cable included.
PC Connector
USB Type B receptacle
Device Connector
USB Type A receptacle
LED Indicator
Green LED indicates isolator receiving 5V power from
the USB computer bus. Flashing indicates short circuit/
retries on peripheral side.
Reset Button
Resets the connection to the USB peripheral device for
reinitialization and re-enumeration.
Enclosure Material
ABS Resin, UL94 rated, IP30 plastic case.
■ Environmental
Operating temperature
-40 to 70°C (-40° to 158°F).
Storage temperature
-40 to 85°C (-40 to 185°F).
Relative humidity
5 to 95% non-condensing.
Power
PC Connect Side: Standard USB bus power (5V DC).
Device Connect Side: 5V DC / 120mA with full power
connection from PC. Includes over-current protection
with auto-retry.
Isolation
1500V AC / 2100V DC peak isolation.
250V AC continuous safety isolation.
Agency Approvals:
CE and FCC compliant. UL/cUL Class 1 Div. 2 Zone 2.
Radiated Field Immunity (RFI)
Designed to comply with IEC1000-4-3 Level 3 and
EN50082-1.
Electromagnetic Compatibility (EMC)
Minimum immunity per EN61000-6-2:2001
Electrostatic Discharge (ESD) Immunity
Per IEC61000-4-2.
Radiated Field Immunity (RFI)
Per IEC61000-4-3.
Electrical Fast Transient Immunity (EFT)
Per IEC61000-4-4. Complies with IEC1000-4-4 Level 3
and EN50082-1.
Surge Immunity
Complies with IEC1000-4-5 Level 3 and EN50082-1.
Per IEC61000-4-5.
Conducted RF Immunity (CRFI)
Per IEC61000-4-6.
Emissions
Per EN61000-6-4:2001.
Radiated Frequency Emissions
Per CISPR11 Class A. Meets or exceeds EN50081-1 for
Class B equipment.
PERSONAL COMPUTER
RUNNING WINDOWS OS
1 METER CABLE
USB-A MALE
TO HOST USB PORT HOST
USB
HOST USB SERIAL
PORT CONNECTOR
AT BACK OF PC
CONFIGURATION
SOFTWARE
ACROMAG
HOST PC RUNNING
USB-B MALE
DEVICE
CONNECT
PC
CONNECT
POWER
RESET
CONNECTION
Acromag
THE LEADER IN INDUSTRIAL I/O
R
USB-A MALE
USB-ISOLATOR
USB MiniB Socket
(Front-Panel of Module)
MODEL TT2XX TRANSMITTER
USB MiniB MALE
TT SERIES USB TRANSMITTER CONNECTIONS
LED
(RECOMMENDED)
CABLE Model 4001-113
MODEL NO. - USB-ISOLATOR
CABLE Model 4001-112
248-295-0880 ■ 248-624-9234 ■ ■ ■ 30765
Wixom Rd, Wixom, MI 48393 USA
ST131 RTD input head-mount transmitter
Transmitters: ST130 Series
Bulletin #8400-625j
Description
The ST131 is a low-cost two-wire transmitter
that converts a 100 ohm Platinum RTD sensor
input to a proportional 4-20mA signal. Power
is received from the output loop current. The
transmitter provides sensor excitation and
includes linearization, lead-wire compensation,
and lead-break detection functions. Setup and
calibration are fast and easy with a convenient
USB connection to your PC and Acromag’s
Windows configuration software.
Advanced signal processing capabilities, variable
range input, and convenient USB programming
make this instrument a very versatile temperature
transmitter for RTD and resistance elements.
These transmitters are designed to withstand
harsh industrial environments and operate
reliably across a wide temperature range with
very low drift. They feature RFI, EMI, ESD, EFT,
and surge protection plus low radiated emissions.
Key Features & Benefits
■ Easy setup and digital calibration via USB with
Windows configuration software
■ Flexible RTD or linear resistance input ranges
■ Supports any 100 ohm Pt RTD (375-393 alpha)
■ High accuracy and linearity
■ Advanced analog signal conditioning ASIC
eliminates digitization errors
■ Low temperature drift
■ Fast response time (< 500µS)
■ Programmable over/under-range limits
■ Selectable upscale or downscale operation for
sensor errors and lead-break detection
■ NAMUR NE43 compliant fault response
■ Reverse polarity protected with non-polarized
output
■ Mounts in DIN Form B sensor heads
■ Optional DIN rail adapter
■ Wide ambient operation (-40 to 80°C)
■ Hardened for harsh environments
■ CE Compliant. UL/cUL Class 1 Div 2 Zone 2
approvals. ATEX Certified.
100 ohm Pt RTD or 0-900 ohm input ◆ 4-20mA output ◆
Loop-powered, 9-32V DC
2-WIRE 3-WIRE 4-WIRE
PT RTD OR RESISTANCE
DC SUPPLY
(9-32V)
EARTH
GROUND
R LOAD
4-20mA
I
T1
T2
T3
T4 T5
T6
+
–
1
2
3
4 5
6
OUT IN
+
–
USB
1
2
3
4
IN +
IN –
INPUT
TERMINALS
ADD JUMPER (2-WIRE ONLY)
INPUT CONNECTIONS
OUTPUT CONNECTIONS
T1
T2
T3
T4 T5
T6
+
–
1
2
3
4 5
6
OUT IN
+
–
USB
OUTPUT
TERMINALS
+
–
– +
–
+
OUT +
OUT –
6
5
DIMENSIONS
Dimensions in
millimeters (inches)
33.00
(1.299)
16.50
(0.650)
5.15
(0.203)
Ø
6.48
(0.255)
Ø
5.28
(0.208)
20.0°
44.50
(1.752)
23.40
(0.921)
10.44
(0.411)
12.96
(0.510)
ST130 Series Transmitter
Configuration Software
is downloadable (FREE)
from .
USB
Configured
248-295-0880 ■ 248-624-9234 ■ ■ ■ 30765
Wixom Rd, Wixom, MI 48393 USA
All trademarks are property of their respective owners.
Copyright © Acromag, Inc. 2013. Data subject to change
without notice. Printed in USA 12/2013
Transmitters: ST130 Series
ST131 RTD input head-mount transmitter
Performance Specifications
■ USB Interface
USB Connector
USB Mini-B type socket, 5-pin.
USB Data Rate
12Mbps. USB v1.1 and 2.0 compatible.
USB Transient Protection
Transient voltage suppression on power and data lines.
USB Cable Length
5.0 meters maximum.
Driver
Not required. Uses built-in Human Interface Device
(HID) USB drivers of the Windows operating system.
■ Input
Input Configuration
Two-, three- or four-wire sensor input connections.
Input Ranges
100 ohm Platinum RTD, alpha = 375-393,
385 (default), -50 to 900°C (-58 to 1652°F).
0 to 900 ohms linear resistance.
Programs in °C or ohmic integers only.
Zero Adjust
RTD 3/4 wire: -50, -17.78, or 0°C (-58, 0, 32°F).
RTD 2 wire: 0°C (32°F) fixed.
RES: 0 or 100 ohms.
Full-Scale Adjust
RTD: up to 900°C (1652°F), 50°C (58°F) span minimum.
Resistance: up to 900 ohms, 8 ohm span minimum.
Excitation Current
0.5mA, nominal.
Lead-Wire Compensation
25 ohms per lead.
Lead Break (Sensor Burnout) Detection
Configurable for either upscale or downscale.
■ Output
Output Range
4 to 20mA DC.
Under-scale limit adjustable for 2.1 to 3.6mA, nominal.
Over-scale limit adjustable for 21 to 30mA, nominal.
Output Fault Limits (Sensor Fault)
0.4mA below selected under-scale threshold and
1.0mA above over-scale threshold, typical.
Output Compliance
R load = (V supply - 9V) / 0.02A.
R load = 0 to 750 ohms @ 24V DC.
Output Accuracy
Better than ±0.1% of span, typical for spans less than
500°C. Includes the effects of repeatability, terminal
point conformity, and linearization, but does not
include sensor error.
Ambient Temperature Effect
Better than ±0.010% per °C of input span or
±80ppm/°C, typical. Includes the combined effects of
zero and span drift over temperature.
Output Response Time
500µS, typical with 250 ohm load.
■ Environmental
Operating temperature
-40 to 80°C (-40° to 176°F).
Storage temperature
-40 to 85°C (-40 to 185°F).
Relative humidity
5 to 95% non-condensing.
Power Requirement
9-32V DC SELV (Safety Extra Low Voltage), 28mA max.
Isolation
Not isolated.
Shock and Vibration Immunity
Vibration: 5g, per IEC 60068-2-64.
Shock: 50g, per IEC 60068-2-27.
Radiated Emissions
BS EN 61000-6-4, CISPR 16.
Radiated Field Immunity (RFI)
BS EN 61000-6-2, IEC 61000-4-3.
Conducted RF Immunity (CRFI)
BS EN 61000-6-2, IEC 61000-4-6.
Electrostatic Discharge (ESD)
BS EN 61000-6-2, IEC 61000-4-2.
Electrical Fast Transient (EFT)
BS EN 61000-6-2, IEC 61000-4-4.
Surge Immunity
BS EN 61000-6-2, IEC 61000-4-5.
Approvals
CE compliant. UL/cUL listings. ATEX Certified.
Designed for Class I; Division 2; Groups ABCD; Zone 2.
II 3 G Ex nA IIC T4 Gc -40°C < Ta < +80°C
■ Physical
General
General purpose enclosure with potted circuit designed
for mounting in DIN Form B connection heads.
DIN-Rail Mounting
Using optional ST130-DIN adapter, unit can mount to
35x15mm, T-type or G-type DIN rails.
Case Material
Self-extinguishing polycarbonate ABS plastic, UL94
V-0 rated base material. USB dust cap material is
Santoprene, 251-70W232.
Printed Circuit Board
Military grade fire-retardant epoxy glass per IPC-
4101/98 with humi-seal conformal coating.
I/O Connectors
Barrier strip type, captive screw terminals.
Wire range: AWG #14-28 solid or stranded.
Dimensions
Diameter = 44.5mm (1.752 inches),
Height = 23.4mm (0.921 inches).
Conforms to DIN 43 729 Form B size requirements.
Shipping Weight
0.5 pounds (0.22 Kg) packed.
Ordering Information
Models
ST131-0600
Transmitter, 100 ohm Pt RTD input, CE Compliant.
Default calibration: Pt385 RTD, 3-wire, 0-200°C input,
4-20mA output, upscale fault detect.
ST131-0610
Same as ST131-0600 plus UL/cUL Class 1 Div 2 Zone 2
approval and ATEX Certified.
If mounting screws are required,
order one ST130-MTG with each unit.
Services
ST13x-Config/Cal
Factory custom configuration/calibration service.
Specify input type, input/output zero and full-scale
values, filtering, and sensor fault settings on order.
Software
ST13C-SIP
Software Interface Package. Includes configuration
software (ST130-CONFIG), isolator (USB-Isolator) and
two USB cables (Part # 4001-112, 4001-113) for
Acromag ST130 Series head-mount transmitters.
One (1) kit recommended per customer.
Accessories
Connection Head Enclosures
See Bulletin 8400-630 or for info.
ST130-DIN
DIN-rail adapter.
ST130-MTG
Replacement mounting kit (screws and relief springs)
for installing ST130 transmitter in a DIN Form B
connection head.
USB-ISOLATOR
USB-to-USB isolator, includes USB cable (4001-112).
IMPORTANT: To prevent damage or errors
from grounded PCs and surges, Acromag
strongly recommends use of the USB-ISOLATOR
when configuring an ST130 transmitter.
248-295-0880 ■ 248-624-9234 ■ ■ ■ 30765
Wixom Rd, Wixom, MI 48393 USA
Transmitters: ST130 Series
Bulletin #8400-631g
Description
The ST132 is a low-cost two-wire transmitter that
converts a millivolt or thermocouple sensor input
to a proportional 4-20mA control signal. Power
is received from the output loop current. The
transmitter performs signal linearization, cold-
junction compensation, and lead-break detection
functions.
Setup and calibration are fast and easy with
a convenient USB connection to your PC and
Acromag’s Windows configuration software.
Advanced signal processing capabilities, variable
range input, and convenient USB programming
make this instrument a very versatile temperature
measurement device. These transmitters can
withstand harsh industrial environments and
operate reliably across a wide temperature range
with very low drift. They feature RFI, EMI, ESD,
EFT, and surge protection plus low radiated
emissions.
Key Features & Benefits
■ Easy setup and digital calibration via USB with
Windows configuration software
■ Flexible thermocouple or millivolt input ranges
(TC Type J, K, T, R, S, E, B, N or ±100mV)
■ 24-bit A/D microcontroller
■ High accuracy, linearity, stability, and reliability
■ Low temperature drift (<75ppm/°C)
■ Fast response time (as low as 8ms)
■ Supports reverse-acting (inverse) output
■ Selectable upscale or downscale operation for
sensor errors and lead-break detection
■ Non-polarized output/power connection
■ Mounts in DIN Form B sensor heads
■ Shock (50g) and vibration (5g) resistant
■ Optional DIN rail adapter
■ Wide ambient operation (-40 to 80°C)
■ Hardened for harsh environments
■ CE compliant. UL/cUL Class 1 Div 2 Zone 2
approvals. ATEX Certified.
Universal thermocouple (8 types) or ±100mV input ◆ 4-
20mA output ◆ Loop-powered, 7-32V DC
ST132 Thermocouple/millivolt input head-mount transmitter
MILLIVOLT OR
THERMOCOUPLE
DC SUPPLY
(7-32V)
EARTH
GROUND
R LOAD
4-20mA
I
T1
T2
T3
T4 T5
T6
+
–
1
2
3
4 5
6
OUT IN
+
–
USB
1
2
3
4
IN +
IN –
INPUT
TERMINALS
INPUT CONNECTIONS
OUTPUT CONNECTIONS
T1
T2
T3
T4 T5
T6
+
–
1
2
3
4 5
6
OUT IN
+
–
USB
OUTPUT
TERMINALS
+
–
– +
–
+
OUT +
OUT –
6
5
DIMENSIONS
Dimensions in
millimeters (inches)
33.00
(1.299)
16.50
(0.650)
5.15
(0.203)
Ø
6.48
(0.255)
Ø
5.28
(0.208)
20.0°
44.50
(1.752)
23.40
(0.921)
10.44
(0.411)
12.96
(0.510)
±100mV
NC
NC
TYPE J, K, T,
R, S, E, B, N
ST130 Series Transmitter
Configuration Software
is downloadable (FREE)
from .
USB
Configured
ST132 software allows you to configure transmitters
offline, save the file, and
download settings into units later, at your convenience.
248-295-0880 ■ 248-624-9234 ■ ■ ■ 30765
Wixom Rd, Wixom, MI 48393 USA
All trademarks are property of their respective owners.
Copyright © Acromag, Inc. 2013. Data subject to change
without notice. Printed in USA 12/2013
Transmitters: ST130 Series
ST132 Thermocouple input head-mount transmitter with USB-
configuration
Performance Specifications
■ USB Interface
USB Connector
USB Mini-B type socket, 5-pin.
USB Data Rate
12Mbps. USB v1.1 and 2.0 compatible.
USB Transient Protection
Transient voltage suppression on power and data lines.
USB Cable Length
5.0 meters maximum.
Driver
Not required. Uses built-in Human Interface Device
(HID) USB drivers of the Windows operating system.
■ Input
Default Configuration/Calibration
Input: TC J, -17.78 to 60°C, upscale break, high filter.
Output: 4 to 20mA.
Input Ranges and Accuracy
Input Range Accuracy
TC J
TC K
TC T
TC R
TC S
TC E
TC B
TC N
mV
-210 to 760°C (-346 to 1400°F)
-200 to 1372°C (-328 to 2502°F)
-260 to 400°C (-436 to 752°F)
-50 to 1768°C (-58 to 3214°F)
-50 to 1768°C (-58 to 3214°F)
-200 to 1000°C (-328 to 1832°F)
260 to 1820°C (500 to 3308°F)
-230 to 1300°C (-382 to 2372°F)
-100 to 100mV
±0.5°C
±0.5°C
±0.5°C
±1.0°C
±1.0°C
±0.5°C
±1.0°C
±1.0°C
±0.1mV
Error includes the effects of repeatability, terminal
point conformity, and linearization at 25°C operating
ambient temperature.
Thermocouple Reference
(Cold Junction Compensation)
±0.1°C typical, ±0.3°C maximum at 25°C.
Ambient Temperature Effect
Better than ±75ppm/°C (±0.0075%/°C).
Zero Scaling Adjust
0 to 95% of range, typical.
Full Scale Adjust
5 to * of full scale range, typical.
Lead Break (Sensor Burnout) Detection
Configurable for either upscale or downscale.
Thermocouple Input Bias Current
±250nA typical (TC break).
Input Over-Voltage Protection
Bipolar Transient Voltage Suppressers (TVS),
5.6V clamp level typical.
Input Filter Bandwidth
-3dB at 55Hz, typical, normal mode filter.
Resolution
Millivolt input: 0.005% (1 part in 20,000)
Thermocouple input: 0.1°C.
Input Filter
Normal mode filtering, plus selectable digital filtering
settings (none, low, medium, high) optimized and
fixed per input range within the A/D converter.
Noise Rejection (Normal Mode)
75dB @ 60Hz, typical with 100 ohm input unbalance.
■ Output
Output Range
4 to 20mA DC.
Output Compliance
R load = (V supply - 7V) / 0.02A.
R load = 0 to 850 ohms @ 24V DC.
Output Response Time (for step input change)
Time to reach 98% of final output value ranges from
8ms (with no filtering) to 800ms (with high filtering).
■ Environmental
Operating temperature
-40 to 80°C (-40° to 176°F).
Storage temperature
-40 to 85°C (-40 to 185°F).
Relative humidity
5 to 95% non-condensing.
Power Requirement
7-32V DC SELV (Safety Extra Low Voltage), 25mA max.
Isolation
Not isolated.
Shock and Vibration Immunity
Vibration: 5g, per IEC 60068-2-64.
Shock: 50g, per IEC 60068-2-27.
Electromagnetic Compatibility (EMC) Compliance
Radiated Emissions: BS EN 61000-6-4, CISPR 16.
RFI: BS EN 61000-6-2, IEC 61000-4-3.
Conducted RFI: BS EN 61000-6-2, IEC 61000-4-6.
ESD: BS EN 61000-6-2, IEC 61000-4-2.
EFT: BS EN 61000-6-2, IEC 61000-4-4.
Surge Immunity: BS EN 61000-6-2, IEC 61000-4-5.
Approvals
CE compliant. UL/cUL listings. ATEX Certified.
Designed for Class I; Division 2; Groups ABCD; Zone 2.
II 3 G Ex nA IIC T4 Gc -40°C < Ta < +80°C
■ Physical
General
General purpose enclosure with potted circuit designed
for mounting in DIN Form B connection heads.
Case Material
Self-extinguishing polycarbonate ABS plastic, UL94
V-0 rated base material. USB dust cap material is
Santoprene, 251-70W232.
I/O Connectors
Barrier strip type, captive screw terminals.
Wire range: AWG #14-28 solid or stranded.
Shipping Weight
0.5 pounds (0.22 Kg) packed.
Ordering Information
Models
ST132-0600
Transmitter, thermocouple/millivolt input, CE approval.
ST132-0610
Same as ST132-0600 plus UL/cUL Class 1 Division 2
Zone 2 approval and ATEX Certified.
If mounting screws are required,
order one ST130-MTG with each unit.
Services
ST13x-Config/Cal
Factory custom configuration/calibration service.
Specify input type, input/output zero and full-scale
values, filtering, and sensor fault settings on order.
Software
ST13C-SIP (recommend one kit per customer)
Software Interface Package. Includes configuration
software (ST130-CONFIG), isolator (USB-ISOLATOR)
and two USB cables (Part # 4001-112, 4001-113) for
Acromag ST130 Series head-mount transmitters.
Accessories
Connection Head Enclosures
See Bulletin 8400-630 or for info.
ST130-DIN
DIN-rail adapter (Type G or T).
ST130-MTG
Replacement mounting kit (screws and relief springs)
for installing ST130 transmitter in a DIN Form B
connection head.
USB-ISOLATOR
USB-to-USB isolator, includes USB cable (4001-112).
IMPORTANT: To prevent damage or errors
from grounded PCs and surges, Acromag
strongly recommends use of the USB-ISOLATOR
when configuring an ST130 transmitter.
248-295-0880 ■ 248-624-9234 ■ ■ ■ 30765
Wixom Rd, Wixom, MI 48393 USA
Transmitters: ST130 Series
Bulletin #8400-632f
Description
The ST133 is a low-cost two-wire transmitter that
isolates and converts a millivolt or thermocouple
sensor input to a proportional 4-20mA control
signal. Power is received from the output
loop current. The transmitter performs signal
linearization, cold-junction compensation, and
lead-break detection functions.
High-voltage isolation separates the input from
the output circuit. Isolation protects from surges,
reduces noise, and eliminates ground loop errors.
Setup and calibration are fast and easy with
a convenient USB connection to your PC and
Acromag’s Windows configuration software.
Advanced signal processing capabilities, variable
range input, and convenient USB programming
make this instrument a very versatile temperature
measurement device. These transmitters can
withstand harsh industrial environments and
operate reliably across a wide temperature range
with very low drift. They feature RFI, EMI, ESD,
EFT, and surge protection plus low radiated
emissions.
Key Features & Benefits
■ Easy setup and digital calibration via USB with
Windows configuration software
■ Flexible thermocouple or millivolt input ranges
(TC Type J, K, T, R, S, E, B, N or ±100mV)
■ 1500V input isolation
■ 24-bit A/D microcontroller
■ High accuracy, linearity, stability, and reliability
■ Low temperature drift (<75ppm/°C)
■ User selectable filtering (none, low, med. high)
■ Fast response time (as low as 90ms)
■ Supports reverse-acting (inverse) output
■ Selectable upscale or downscale operation for
sensor errors and lead-break detection
■ Non-polarized output/power connection
■ Mounts in DIN Form B sensor heads
■ Shock (50g) and vibration (5g) resistant
■ Optional DIN rail adapter
■ Wide ambient operation (-40 to 80°C)
■ Hardened for harsh environments
■ CE compliant. UL/cUL Class 1 Div 2 Zone 2
approvals. ATEX Certified.
Thermocouple (8 types) or ±100mV input ◆ 4-20mA output
◆ 1500V isolation ◆ Loop-powered
ST133 Isolated thermocouple/mV input head-mount
transmitter
MILLIVOLT OR
THERMOCOUPLE
DC SUPPLY
(12-32V)
EARTH
GROUND
R LOAD
4-20mA
I
T1
T2
T3
T4 T5
T6
+
–
1
2
3
4 5
6
OUT IN
+
–
USB
1
2
3
4
IN +
IN –
INPUT
TERMINALS
INPUT CONNECTIONS
OUTPUT CONNECTIONS
T1
T2
T3
T4 T5
T6
+
–
1
2
3
4 5
6
OUT IN
+
–
USB
OUTPUT
TERMINALS
+
–
– +
–
+
OUT +
OUT –
6
5
DIMENSIONS
Dimensions in
millimeters (inches)
33.00
(1.299)
16.50
(0.650)
5.15
(0.203)
Ø
6.48
(0.255)
Ø
5.28
(0.208)
20.0°
44.50
(1.752)
23.40
(0.921)
10.44
(0.411)
12.96
(0.510)
±100mV
OPT GND
NC
TYPE J, K, T,
R, S, E, B, N
ST130 Series Transmitter
Configuration Software
is downloadable (FREE)
from .
USB
Configured
ST133 software allows you to configure transmitters
offline, save the file, and
download settings into units later, at your convenience.
248-295-0880 ■ 248-624-9234 ■ ■ ■ 30765
Wixom Rd, Wixom, MI 48393 USA
All trademarks are property of their respective owners.
Copyright © Acromag, Inc. 2013. Data subject to change
without notice. Printed in USA 4122013
Transmitters: ST130 Series
ST133 Isolated thermocouple input head-mount transmitter
with USB-configuration
Performance Specifications
■ USB Interface
USB Connector
USB Mini-B type socket, 5-pin.
USB Data Rate
12Mbps. USB v1.1 and 2.0 compatible.
USB Transient Protection
Transient voltage suppression on power and data lines.
USB Cable Length
5.0 meters maximum.
Driver
Not required. Uses built-in Human Interface Device
(HID) USB drivers of the Windows operating system.
■ Input
Default Configuration/Calibration
Input: TC J, -210 to 760°C, upscale fault, high filter.
Output: 4 to 20mA.
Input Ranges and Accuracy
Input Range Accuracy
TC J
TC K
TC T
TC R
TC S
TC E
TC B
TC N
mV
-210 to 760°C (-346 to 1400°F)
-200 to 1372°C (-328 to 2502°F)
-260 to 400°C (-436 to 752°F)
-50 to 1768°C (-58 to 3214°F)
-50 to 1768°C (-58 to 3214°F)
-200 to 1000°C (-328 to 1832°F)
260 to 1820°C (500 to 3308°F)
-230 to 1300°C (-382 to 2372°F)
-100 to 100mV
±0.5°C
±0.5°C
±0.5°C
±1.0°C
±1.0°C
±0.5°C
±1.0°C
±1.0°C
±0.1mV
Error includes the effects of repeatability, terminal
point conformity, and linearization at 25°C operating
ambient temperature.
Thermocouple Reference
(Cold Junction Compensation)
±0.1°C typical, ±0.3°C maximum at 25°C.
Ambient Temperature Effect
Better than ±75ppm/°C (±0.0075%/°C).
Zero Scaling Adjust
0 to 95% of range, typical.
Full Scale Adjust
5 to * of full scale range, typical.
Lead Break (Sensor Burnout) Detection
Configurable for either upscale (24mA) or downscale
(3.3mA) operation.
Thermocouple Input Bias Current
±250nA typical (TC break).
Input Over-Voltage Protection
Bipolar Transient Voltage Suppressers (TVS),
5.6V clamp level typical.
Resolution
Millivolt input: 0.0025% (1 part in 40,000)
Thermocouple input: 0.1°C.
Input Filter
Normal mode filtering, plus selectable digital filtering
settings (none, low, medium, high) optimized and
fixed per input range within the A/D converter.
Noise Rejection (Normal Mode)
75dB @ 60Hz, typical with 100 ohm input unbalance.
■ Output
Output Range
4 to 20mA DC.
Output Compliance
R load = (V supply - 12V) / 0.024A.
R load = 0 to 500 ohms @ 24V DC.
Output Response Time (for step input change)
Time to reach 98% of final output value (typical)
No filtering 90 to 125ms
Low filter 240 to 420ms
Medium filter 550 to 1020ms
High filter 900 to 1500ms
■ Environmental
Operating temperature
-40 to 80°C (-40° to 176°F).
Storage temperature
-40 to 85°C (-40 to 185°F).
Relative humidity
5 to 95% non-condensing.
Power Requirement
12-32V DC SELV (Safety Extra Low Voltage),
24mA max.
Isolation
1500V AC peak. 250V AC (354V DC) continuous
isolation between input and output circuits.
Shock and Vibration Immunity
Vibration: 5g, per IEC 60068-2-64.
Shock: 50g, per IEC 60068-2-27.
Electromagnetic Compatibility (EMC) Compliance
Radiated Emissions: BS EN 61000-6-4, CISPR 16.
RFI: BS EN 61000-6-2, IEC 61000-4-3.
Conducted RFI: BS EN 61000-6-2, IEC 61000-4-6.
ESD: BS EN 61000-6-2, IEC 61000-4-2.
EFT: BS EN 61000-6-2, IEC 61000-4-4.
Surge Immunity: BS EN 61000-6-2, IEC 61000-4-5.
Approvals
CE compliant. UL/cUL listings. ATEX Certified.
Designed for Class I; Division 2; Groups ABCD; Zone 2.
II 3 G Ex nA IIC T4 Gc -40°C < Ta < +80°C
■ Physical
General
General purpose enclosure with potted circuit designed
for mounting in DIN Form B connection heads.
Case Material
Self-extinguishing polycarbonate ABS plastic, UL94
V-0 rated base material. USB dust cap material is
Santoprene, 251-70W232.
I/O Connectors
Barrier strip type, captive screw terminals.
Wire range: AWG #14-28 solid or stranded.
Shipping Weight
0.5 pounds (0.22 Kg) packed.
Ordering Information
Models
ST133-1600
Transmitter, thermocouple/millivolt input, CE approval.
ST133-1610
Same as ST133-1600 plus UL/cUL Class 1 Division 2
Zone 2 approval and ATEX Certified.
If mounting screws are required,
order one ST130-MTG with each unit.
Services
ST13x-Config/Cal
Factory custom configuration/calibration service.
Specify input type, input/output zero and full-scale
values, filtering, and sensor fault settings on order.
Software
ST13C-SIP (recommend one kit per customer)
Software Interface Package. Includes configuration
software (ST130-CONFIG), isolator (USB-ISOLATOR)
and two USB cables (Part # 4001-112, 4001-113) for
Acromag ST130 Series head-mount transmitters.
Accessories
Connection Head Enclosures
See Bulletin 8400-630 or for info.
ST130-DIN
DIN-rail adapter (Type G or T).
USB-ISOLATOR
USB-to-USB isolator, includes USB cable (4001-112).
IMPORTANT: To prevent damage or errors
from grounded PCs and surges, Acromag
strongly recommends use of the USB-ISOLATOR
when configuring an ST130 transmitter.
: 248-295-0880 ■ ■ ■ ■ 30765 S Wixom Rd, Wixom,
MI 48393 USA
Bulletin #8400-630c
Description
For your convenience, Acromag offers a variety
of head-mount enclosures and other mounting
accessories to simplify your system installation.
Ordering Information
NOTE: For more information visit .
Mounting Accessories
ST130-MTG
Replacement mounting Kit – Includes two (2) M4
mounting screws, (2) 6-32 mounting screws, and (2)
two relief springs for mounting an ST130 transmitter
in a DIN Form B connection head.
4001-115K
Explosion-Proof Aluminum Connection Head –
FM/FMC, Class I, Division 1, Groups A, B, C, D, T6;
Class II, III, Division 1, Groups E, F, G, T6; NEMA 4
rated. Includes M4 mounting screws and springs.
4001-116K
Explosion-Proof Stainless Steel Connection Head –
FM/FMC, Class I, Division 1, Groups A, B, C, D, T6;
Class II, Division 1, Groups E, F, G, T6; Class III,
NEMA 4X rated. Includes M4 mtg screws and springs.
4001-117K
General-Purpose Aluminum Connection Head –
NEMA 4X and IP68 rated. Includes M4 mounting
screws and springs.
4001-119K
General-Purpose Cast Iron Connection Head –
NEMA 4X rated. Includes M4 mtg screws and springs.
ST130-DIN
Series ST DIN Rail Adapter – Includes a DIN rail bracket
with mounting screws that connects a ST130 transmit-
ter to a 35mm T-type or G-type DIN rail. Includes M4
mounting screws and springs.
Simplifies mounting of ST130 Series transmitters ◆ Ideal
for mounting in the field or in a control room
Mounting Accessories Enclosures, adapters, mounting kits
Transmitters: ST130 Series
4001-115K Aluminum
Explosion-Proof,
NEMA-4 rated
4001-117K Aluminum
General-Purpose,
NEMA-4X rated
4001-116K Stainless
Steel Explosion-Proof,
NEMA-4X rated
4001-119K Cast Iron
General-Purpose,
NEMA-4X rated
3.84
4.37
1.69
1.299
1.575
Ø 3.31
1.81
3.35
1.89
Ø 1.30
1/2”~3/4” PIPE THREAD &
SOCKET DIAMETER
Ø 3.39
1.85
3.43
1.89
Ø 1.42
1/2”~3/4” PIPE THREAD &
SOCKET DIAMETER
ST130-DIN
DIN-rail Adapter
ST130-MTG
Mounting Kit
Dimensions:
4001-117K
Dimensions:
4001-119K
Dimensions: 4001-115K and 4001-116K
Required to mount ST130
transmitter in connection
head enclosure.
Includes ST130-MTG
All trademarks are property of their respective owners.
Copyright © Acromag, Inc. 2011. Data subject to change
without notice. Printed in USA 6/2011
◆ 800M Math/Computation ◆ 800A Inligent Alarms ◆
800T Inligent Transmitters
800 Series Models by Function Guide
InliPack transmitter units convert sensor inputs to
isolated process current or voltage output signals.
Alarm units monitor sensor inputs and provide relay
actuation if conditions exceed user-defined limits.
InliPack math modules perform complex
mathematical computations.
801T 811T 841T 851T 801A 811/812A 822A 832A
892/894M 895/896M
PRIMARY FUNCTIONS
Isolated transmitter x x x x x x
Single channel alarm x x x x x x
Dual channel alarm x x x
Dual channel math/computation x x
Quad channel math/computation x
POWER CONFIGURATION
DC-powered x x x x x x x x x x
INPUTS
DC voltage/current input x x x x
DC millivolt input x x x x
Thermocouple input x x x
RTD input x x x
Resistance input x x x
Frequency input x
AC current input (requires external sensor) x x x x
Strain gauge/load cell x
OUTPUTS
DC current x x x x x
DC voltage x x x x x
Frequency/pulse/pulse-width modulation x
SPDT or SPST relay x x x x x x x x x
DPDT relay x x
InliPack ® : 800 Series
: 248-295-0880 ■ ■ ■ ■ 30765 S Wixom Rd, Wixom,
MI 48393 USA
– 1 –
InliPack 800 Series Signal Conditioners
Inligent Transmitters ◆ Inligent Alarms ◆
Inligent Math Modules
InliPack ® Inligent
Transmitters, Alarms,
and Math Modules
The InliPack series is a high-performance line
of multi-function I/O modules. InliPack units
feature universal input/output ranges and an
inligent microcontroller to provide extreme
flexibility and powerful signal conditioning
capabilities.
Since each InliPack module supports many I/O
configurations, you can handle a broad range of
applications with only a few models. Now you
can reduce your spare inventory stock and still
remain covered in an emergency.
Windows ® XP ®/ /Vista/7 software helps you quickly
configure InliPacks for your application. With
just a few mouse clicks, you can select your
desired input/output ranges and other operating
parameters from a list of available options. And
if your operating requirements change, a simple
reconfiguration lets you adapt in a hurry with
minimal downtime.
Once configured, InliPacks are very easy to
adjust in the field with standard calibrators (no
PC required). Front panel push buttons simplify
changes to setpoints, deadbands, and zero/full-
scale values. LEDs clearly indicate the status and
mode of operation.
Key Features & Benefits
■ Universal I/O ranges cover a wide range of
applications to reduce stock inventories.
■ Windows XP/Vista/7 software configuration
simplifies InliPack module setup.
■ Push button field calibration makes
routine maintenance easy without a PC.
■ Internal microcontroller provides
inligent signal processing capabilities.
■ Quick-disconnect terminals facilitate installa-
tion and removal of I/O modules.
■ Field diagnostics enhanced with software
minimize downtime.
Transmitters
InliPack transmitter units convert sensor inputs
to isolated process current or voltage output
signals. Each unit accepts a variety of input
and output ranges to support a broad range of
applications. An optional relay output enables
local alarms. Plus, the internal microcontroller
can perform many signal processing and transfer
functions.
Input
■ Thermocouple/RTD/ohms/DC millivolts
■ DC voltage/current
■ Frequency/pulse counter
■ AC current
Output
■ Universal DC voltage/current
■ SPDT relay
Functions
All functions are standard
■ Signal linearizer
■ Square root computation
■ Signal average computation
■ Pulse counting
■ Limit alarm
InliPack 800 Series Signal Conditioners
RJ11 Jack
(6 Conductor)
2
ST
RLY
MODE
SET
RST 1
+
10 TO 36VDC
POWER
RST 2
1
RUN
6 Foot Cable
Model 5030-913
Serial Port Adapter
PC running
Acromag
Win XP/Vista/7
Configuration Software
Model 5030-881
RJ11 Plug
(6 Conductor)
RJ11 Plug
(6 Conductor)
Model 5030-902
Interface Cable
(adapter to InliPack)
InliPack
Module
Configuration Port:
Allows full
configuration of
InliPack module
Configuration Diagram
After the initial software configuration, a PC is no
longer required. Field calibration is easily handled with
the
InliPack’s push-buttons, status LEDs and a standard
field calibrator.
InliPack ® : 800 Series
: 248-295-0880 ■ ■ ■ ■ 30765 S Wixom Rd, Wixom,
MI 48393 USA
– 2 –
Alarms
InliPack alarm units monitor sensor inputs
and provide relay actuation if conditions exceed
user-defined limits. An internal microcontroller
provides signal processing and logic functions,
normally found only in expensive controllers,
for a variety of inligent alarm functions. Dual
relay units support two different alarm functions
at the same time.
Inputs
■ Thermocouple/RTD/ohms/DC millivolts
■ DC voltage/current
■ AC current
Outputs
■ One DPDT relay or two SPDT relays
Functions
All functions are standard on every alarm unit.
■ Limit and window (band-pass) alarm
■ Deviation alarm
■ Rate-of-change alarm
■ On/off controller
■ Peak/valley signal detection
Math Modules
InliPack math modules perform a variety of
complex mathematical computations on up to
four input signals and provide a DC or frequency
output signal that represents the calculated
result. Typical applications include calculating
sums, deltas, averages, flow rates, volumes, and
tracking minimum/maximum values. Equations
are entered using a freeform format, the same as
in most popular spreadsheet programs.
Input and Output Ranges
■ Universal DC voltage/current
■ Frequency, pulse, PWM outputs
Functions
■ Add, subtract, multiply, divide
■ Square root, exponential, logarithmic
■ Absolute value, minimum/maximum
■ High/low selector, track and hold
■ Trigonometric (sine, cosine, tangent)
■ Conditional arguments (if, then, and, or)
Fast Installation
Step 1 Run configuration software offline to
select desired operating parameters.
Step 2 Print configuration or save to disk.
Step 3 Connect PC to InliPack and
download configuration data.
Step 4 Disconnect PC and install
InliPack module in the field.
Step 5 Optional. Calibrate in field using push-
buttons on front panel.
Easy Software Configuration
Acromag’s configuration software is the key to
the InliPack’s easy-to-use operation. The soft-
ware employs the friendly Windows XP/Vista/7
interface with pull-down selection menus and
fill-in-the-blank fields to speed you through a few
brief configuration screens. No programming is
required.
An adapter plugs into the serial port of your
computer. It serves as an isolated interface
between the InliPack and the PC. A cable with
RJ11 phone-style plugs at each end links
the adapter to the InliPack’s serial port. The
software, adapter, and cable are sold as a kit
(Model 800C-SIP) for easy ordering.
Once connected, the software reads the
InliPack’s non-volatile memory to determine
the unit type and loads the appropriate configu-
ration form with several property pages. As you
select the input range and alarm function on
the general property page, the other pages are
dynamically customized to speed you through
the procedure. After you select the operating
parameters, the configuration is downloaded
and stored in the InliPack’s memory. The con-
figuration is also saved to a file for subsequent
downloading to other modules or for quick
modifications. This capability saves you valuable
downtime and archives your settings.
After you complete the configuration, the soft-
ware provides a detailed printout to document
your application.
Typical software configuration screen. Data is uploaded
from the InliPack module.
InliPack ® : 800 Series
: 248-295-0880 ■ ■ ■ ■ 30765 S Wixom Rd, Wixom,
MI 48393 USA
– 3 –
Software
Diagnostics
The configuration software also shows you the
current status of your InliPack module. A test
screen (shown at right) indicates the current
input signal value and the averaged value. The
status of the relay and output signal are also
displayed.
You can override the output for 10 seconds to
verify the system is responding properly. The
screen’s InliPack diagram has representative
LEDs to help you detect any bulb failures and
verify proper operation.
On alarm modules, you can reset latched relays
in software by clicking the screen’s reset button
with your mouse.
Software Calibration
The InliPack’s configuration software makes
calibrating your transmitters and alarms very
easy. You can upload your InliPack’s current
calibration and quickly verify the settings or make
changes on the input, output and thermocouple
reference junction calibration property sheets.
The output calibration window has a slider con-
trol that you can drag with your mouse. This
slider allows you to adjust the output current or
voltage signal independent of the input signal.
If a unit is miscalibrated or you make a mistake,
you can instantly restore the factory calibration
settings. The original values are displayed on the
screen.
Quickly test or monitor your InliPack module with a
software screen that displays all current values.
Easily set calibration values by simply typing in the
values or restore original factory settings instantly.
InliPack ® : 800 Series
: 248-295-0880 ■ ■ ■ ■ 30765 S Wixom Rd, Wixom,
MI 48393 USA
– 4 –
Simple Push-Button Field
Configuration
After the initial software configuration, key
functions may be reprogrammed in the field
without a PC. Push-buttons let you adjust the
InliPack’s setpoint, deadband, zero, and full
scale signal values with conventional field
calibrators. LEDs indicate the mode and guide
you through a few short steps. Latched relays
may also be reset in the field.
With InliPacks, zero and span adjustments are
one-step operations. Unlike many potentiom-
eter-based instruments, InliPack
zero/span adjustments are inde-
pendent and non-interactive. The
internal microprocessor holds the zero setting
constant while the span is adjusted for precise
calibration in a single iteration.
Transmitter Alarm The following tables describe push-
button and
LED functions for alarm and transmitter module
types.
Push-Buttons (Alarms)
Mode: Push to enter field configuration mode.
Set: Accepts input data during field calibration.
RST 1: Resets a latched alarm for relay 1.
RST 2: Resets a latched alarm for relay 2.
Push-Buttons (Transmitters)
Mode: Push to enter field configuration mode.
Set: Accepts input data during field calibration.
▲: Calibrates (increases) the output signal.
▼: Calibrates (decreases) the output signal.
LED Indicators (Alarms)
Run (Green) - Indicates power applied.
Flashes when performing diagnostics.
ST (Yellow) - Status LED flashes to indicate input is out
of range or a sensor break has been detected.
Relay 1 Alarm (Yellow) - Constant ON indicates alarm
condition for relay 1.
Relay 2 Alarm (Yellow) - Constant ON indicates alarm
condition for relay 2.
LED Indicators (Transmitters)
Run (Green) - Indicates power applied.
Flashes when performing diagnostics.
ST (Yellow) - Status LED flashes to indicate input is out
of range or a sensor break has been detected.
Z/FS (Yellow) - Lights or flashes to indicate the input
zero or full-scale value is being calibrated.
RLY (Yellow) - Lights to indicate alarm condition or
relay setpoint adjustments are being made. Flashes for
deadband adjustments.
RUN
Acromag
MODE
SET
1 2
RELAY
ST
RST 2
RST 1
R
RUN
Acromag
MODE
Z/FS
ST
SET
R
RLY
Software
Configuration
Port
InliPack
Transmitter
Programmable
Input
Programmable
Output
Programmable
Function
DC
Power
Relay
Output
Software
Configuration
Port
InliPack
Math/Computation Module
Programmable
Inputs
Programmable
Outputs
Programmable
Math/Computation
DC
Power
Relay
Output
Software
Configuration
Port
InliPack
Alarm
Programmable
Inputs
Relay
Outputs
Programmable
Alarm Functions
DC
Power
InliPack ® : 800 Series
: 248-295-0880 ■ ■ ■ ■ 30765 S Wixom Rd, Wixom,
MI 48393 USA
– 5 –
I n t e l l i P a c k
®
8 0 0 S e r i e s
90
InliPack ®
801T
Transmitters
Thermocouple,
RTD, Millivolt, and
Resistance Input
Models
801T-0500: Universal temperature transmitter
801T-1500: Transmitter with limit alarm
Input Ranges
TC types: J, K, T, R, S, E, B, N
Millivolt: ±15.625mV to ±1.0V DC
RTD: 100 ohm Pt, 120 ohm Ni, 10 ohm Cu
Resistance: 0 to 500 ohms
Output Ranges
0 to 1mA, 0 to 20mA, 4 to 20mA DC
0 to 5V, 0 to 10V DC
Limit Alarm
SPDT electro-mechanical relay (-1500 unit only)
Power Requirement
10 to 36V DC
Approvals
CE marked. UL, cUL listed.
I Description
These transmitters isolate and convert sensor
inputs to noise-free, proportional DC current or
voltage output signals. An optional relay output
adds a local limit alarm function.
Each unit offers a selection of input and output
ranges, as well as several signal conditioning
options. This flexibility enables a single InliPack
to handle a broad range of applications. As your
needs change, you can easily reconfigure the
unit for different ranges or functions.
Setup is very easy. InliPack modules are quickly
configured with the user-friendly Windows soft-
ware program. Field adjustments are simple with
the module’s front-panel push-buttons and status
LEDs. Once configured, InliPacks operate
independent of any host computer.
I Special Features
I High-resolution Sigma-Delta A/D converter
delivers high accuracy with low noise.
I Advanced microcontroller provides inligent
signal processing power for linearization,
averaging, and square root computations.
I Windows XP/Vista/7 software
configuration speeds setup and replacement.
I Multi-purpose inputs and outputs reduce
spare stock requirements.
I Relay output option provides local
limit alarm capability.
I Performance
I General Input
Analog to Digital Converter (ADC)
16-bit Σ−? A/D converter.
Resolution
±0.005% of span or 0.1°C.
Ambient Temperature Effect
Better than ±0.005% of input span per °C or ±1µV,
whichever is greater.
Noise Rejection
Normal Mode: Better than 40dB @ 60Hz.
Common Mode: Better than 130dB @ 60Hz.
Input Response Time (for input step change)
Less than 200mS typical
to 98% of final output value.
Input Overvoltage Protection
Bipolar Transient Voltage Suppressors (TVS).
I Thermocouple Input
Thermocouple Input Ranges
Thermocouple type user configured. Signal
linearization, cold-junction compensation, and open
circuit or lead break detection are included.
TC °C Range (°F Range) Accuracy
J -210 to 760°C (-346 to 1400°F) ±0.5°C
K -200 to 1372°C (-328 to 2502°F) ±0.5°C
T -260 to 400°C (-436 to 752°F) ±0.5°C
R -50 to 1768°C (-58 to 3214°F) ±1.0°C
S -50 to 1768°C (-58 to 3214°F) ±1.0°C
E -200 to 1000°C (-328 to 1832°F) ±0.5°C
B 260 to 1820°C (500 to 3308°F) ±1.0°C
N -230 to 1300°C (-382 to 2372°F) ±1.0°C
Thermocouple Break Detection
TC sensor failure can be configured for either upscale
or downscale.
Isolation
+
R L
Input Output
Signal
Conditioning
and
Inligent
Transfer
Functions
SPDT Relay
(801T-1500)
DC Voltage or
Current Ouput
Power
10 - 36V DC
Power
Alarm
N.O.
COM
N.C.
+
Voltage
Out
R L
Current
Out
I+
JMP
V+
RTN
DC-
DC+
IN+
IN-
EXC+
RTN
TC Input 2-Wire RTD
EXC+
RTN
IN+
IN-
3-Wire RTD
EXC+
RTN
IN+
IN-
4-Wire RTD
(Kelvin)
4-Wire RTD
w/Loop
Comp.
EXC+
RTN
IN+
IN-
EXC+
RTN
IN+
IN-
Millivolt
+
EXC+
RTN
IN+
IN-
Resistance
EXC+
RTN
IN+
IN-
Transmitter w/alarm
91
I RTD Input
RTD Input Ranges
100 ohm Platinum, 120 ohm Nickel, or
10 ohm Copper; user-configured.
RTD °C Range (°F Range) Accuracy
Pt 1 -200 to 850°C (-328 to 1562°F) ±0.25°C
Pt 2 -200 to 850°C (-328 to 1562°F) ±0.25°C
Ni -80 to 320°C (-112 to 608°F) ±0.25°C
Cu -200 to 260°C (-328 to 500°F) ±1.00°C
Alpha: Pt1 (a = 1.3850), Pt2 (a = 1.3911),
Ni (a = 1.6720), Cu (a = 1.4272).
2, 3, or 4-wire configurations supported. Module pro-
vides sensor excitation, linearization, lead-wire com-
pensation, and sensor break detection.
RTD Excitation Current
1mA DC typical, all types.
RTD Lead-Wire Compensation
25 ohms per lead.
RTD Break Detection
RTD sensor failure can be configured for either upscale
or downscale.
I Millivolt Input
DC Millivolt/Voltage Input Ranges
±1.0V ±125mV ±31.25mV
±500mV ±62.5mV ±15.625mV
±250mV
Millivolt Accuracy
Better than ±0.05% of input span.
I Resistance Input
Resistance Input Range
0 to 500 ohms.
Resistance Accuracy
±0.05 ohms.
I Output (DC V/mA)
D/A Converter
16-bit Σ−?.
Current Output
Ranges: 0-1mA, 0-20mA, 4-20mA.
Compliance: 10V minimum (500 ohm load).
Accuracy: 0.025% of span.
Voltage Output
Ranges: 0-5V, 0-10V.
Compliance: 10mA maximum with short circuit pro-
tection. 1 ohm output impedance.
Accuracy: 0.025% of span.
Accuracy (overall input to output)
0.075% of span.
I Output (Relay)
Relay
One SPDT electro-mechanical relay.
Relay Ratings (CSA ratings)
25V DC @ 5A.
120/240V AC @ 5A.
Relay Time Delay
Adjustable alarm delay of up to 25 seconds.
Contact Material
Silver-cadmium oxide (AgCdO).
Expected Mechanical Life
20 million operations.
I Environmental
Ambient Temperature
Operating: -25 to 70°C (-13 to 158°F).
Storage: -40 to 85°C (-40 to 185°F).
Relative Humidity
5 to 95%.
Power Requirements
10 to 36V DC. 75mA @ 24V. 120mA @ 15V.
Isolation (optical)
4-way (input/output/relay/power).
1500V AC for 60 seconds or 250V AC continuous.
Radiated Field Immunity (RFI)
EN61000-4-3, EN50082-1.
Electromagnetic Field Immunity (EMI)
Less than ±0.25% of output span effect under the
influence of electromagnetic fields from switching
solenoids, commutator motors, and drill motors.
Electrical Fast Transient (EFT)
EN61000-4-4, EN50082-1.
Surge Withstanding Capability (SWC)
EN61000-4-5, EN50082-1.
Electrostatic Discharge (ESD)
EN61000-4-2, EN50082-1.
Radiated Emissions
EN50081-1 for Class B equipment.
Approvals
CE, UL listed (USA, Canada).
UL3121 - general product safety.
I Configuration
Software Configuration
Units are fully programmable via the Windows
XP/Vista,7 InliPack Configuration
Program. Configuration downloads from PC through
EIA232 serial port using Acromag 800C-SIP kit.
Field Configuration
Output, zero/full-scale, relay setpoint and deadband are
configurable via push-buttons and a standard calibrator.
LED Indicators
LEDs indicate power, status, calibration, and alarm.
I Physical
Enclosure
Case: Self-extinguishing NYLON type 6.6 polyamide ther-
moplastic UL94 V-2 NEMA Type 1 enclosure.
Connectors (Removable Terminal Blocks)
Wire Range: AWG #14-22 (AWG #12 stranded only).
Printed Circuit Boards
Military grade FR-4 epoxy glass circuit board.
Dimensions
1.05W x 4.68H x 4.35D inches.
26.7W x 118.9H x 110.5D millimeters.
Shipping Weight
1 pound (0.45 Kg) packed.
I Ordering
Information
IMPORTANT: All InliPacks require initial
software configuration (order 800C-SIP).
See Note 1 below.
801T-0500
InliPack transmitter (TC/RTD/mV/resistance input).
801T-1500
Same as above, plus an SPDT relay output.
800C-SIP
Software Interface Package.
Only one kit is required for all InliPack models.
See diagram on Page 83 for included parts.
5034-225
USB-to-RS232 adapter. See page 121 for more info.
PS5R-D24
Power supply (24V DC, 2.1A).
See Power Supplies on Page 199.
TBK-B01
Optional terminal block kit, barrier strip style, 2 pcs.
(Does not include terminal block for input wiring.)
TBK-S01
Optional terminal block kit, spring clamp style, 2 pcs.
(Does not include terminal block for input wiring.)
NOTE 1: To order factory configuration, call Acromag
for a configuration form which must accompany your
order. Also, append “-C” to model number (example:
801T-1500-C). 800C-SIP kit is still recommended.
S i g n a l C o n d i t i o n e r s
InliPack ®
Optional terminal blocks: barrier strip (left) and
spring clamp (right). Cage clamp terminal is standard.
I n t e l l i P a c k
®
8 0 0 S e r i e s
92
InliPack ®
811T
Transmitters
DC Current,
DC Voltage, and
AC Current Input
Models
811T-0500: Universal DC input transmitter
811T-1500: Transmitter with limit alarm
Input Ranges
DC Current: 0 to 22mA
DC Voltage: ±100V DC
AC Current: 0 to 20A AC (with external sensor)
Output Ranges
0 to 1mA, 0 to 20mA, 4 to 20mA DC
0 to 5V, 0 to 10V DC
Limit Alarm
SPDT electro-mechanical relay (-1500 unit only)
Power Requirement
10 to 36V DC
Approvals
CE marked. UL, cUL listed.
I Description
These transmitters isolate and convert sensor
inputs to noise-free, proportional DC current or
voltage output signals. An optional relay output
adds a local limit alarm function.
Each unit offers a selection of input and output
ranges, as well as several signal conditioning
options. This flexibility enables a single InliPack
to handle a broad range of applications. As your
needs change, you can easily reconfigure the
unit for different ranges or functions.
Setup is very easy. InliPack modules are quickly
configured with the user-friendly Windows soft-
ware program. Field adjustments are simple with
the module’s front-panel push-buttons and status
LEDs. Once configured, InliPacks operate
independent of any host computer.
I Special Features
I High-resolution Sigma-Delta A/D converter
delivers high accuracy with low noise.
I Advanced microcontroller provides inligent
signal processing power for linearization,
averaging, and square root computations.
I Windows XP/Vista/7 software
configuration speeds setup and replacement.
I Multi-purpose inputs and outputs reduce
spare stock requirements.
I Relay output option provides local
limit alarm capability.
I Performance
I General Input
Analog to Digital Converter (ADC)
16-bit Σ−? A/D converter.
Ambient Temperature Effect
Better than ±0.005% of input span per °C or ±1µV,
whichever is greater.
Noise Rejection
Normal Mode: Better than 40dB @ 60Hz.
Common Mode: Better than 100dB @ 60Hz.
Input Response Time (for input step change)
Less than 100mS typical
to 98% of final output value.
Input Overvoltage Protection
Bipolar Transient Voltage Suppressors (TVS).
I DC Current Input
DC Current Input Range (* rangeable)
Input Ranges Resolution
0 to 22mA DC 757nA
0 to 5mA DC 189nA
DC Current Input Impedance
24.9 ohms.
Excitation Supply (for 2-wire instruments)
+15V DC at 24mA maximum.
DC Current Input Accuracy
Better than ±0.05% of input span.
continued on next page
Input
Alarm
N.O.
COM
N.C.
Isolation
Signal
Conditioning
and
Inligent
Transfer
Functions
SPDT Relay
(811T-1500)
DC Voltage or
Current Ouput
Power
10 - 36V DC
+
R L
Output
Power
+
Voltage
Out
R L
Current
Out
I+
JMP
V+
RTN
DC-
DC+
EXC+
SHLD
I +
RTN
V + V +
I +
EXC+
RTN
SHLD
+
-
2-Wire
Transmitter
2-Wire Transmitter DC Voltage
SHLD
I +
RTN
V +
EXC+
-
+
5020-350
AC Current Sensor DC Current
-
+
EXC+
I +
V +
RTN
SHLD
DC
current
(mA)
+
AC Current Sensor Model 5020-350
(ordered separay)
Transmitter w/alarm
93
S i g n a l C o n d i t i o n e r s
InliPack ®
I DC Voltage Input
DC Voltage Input Ranges (* rangeable)
Input Ranges Resolution
±100V DC 3.77mV
±50V DC 1.88mV
±25V DC 942µV
±12V DC 471µV
±6V DC 236µV
±3V DC 118µV
Input impedance
Greater than 500K ohms.
DC Voltage Input Accuracy
Better than ±0.05% of input span.
I AC Current Input
AC Current Input Range (optional)
An optional external AC current sensor is required to
monitor AC current signals (Model 5020-350).
AC Current Range Primary Turns
0 to 20A AC 1
0 to 10A AC 2
0 to 5A AC 4
0 to 2A AC 10
0 to 1A AC 20
AC Current Input Accuracy
Better than ±0.05% of input span.
I Output (DC V/mA)
D/A Converter
16-bit Σ−?.
Current Output
Ranges: 0-1mA, 0-20mA, 4-20mA.
Compliance: 10V minimum (500? load).
Accuracy: 0.025% of span.
Voltage Output
Ranges: 0-5V, 0-10V.
Compliance: 10mA maximum with short circuit pro-
tection. 1? output impedance.
Accuracy: 0.025% of span.
Accuracy (overall input to output)
0.075% of span.
I Output (Relay)
Relay
One SPDT electro-mechanical relay.
Relay Ratings (CSA ratings)
25V DC @ 5A.
120/240V AC @ 5A.
Relay Time Delay
Adjustable alarm delay of up to 25 seconds.
Contact Material
Silver-cadmium oxide (AgCdO).
Expected Mechanical Life
20 million operations.
I Environmental
Ambient Temperature
Operating: -25 to 70°C (-13 to 158°F).
Storage: -40 to 85°C (-40 to 185°F).
Relative Humidity
5 to 95%.
Power Requirements
10 to 36V DC. 110mA @ 24V. 170mA @ 15V.
Isolation (optical)
4-way (input/output/relay/power).
1500V AC for 60 seconds or 250V AC continuous.
Radiated Field Immunity (RFI)
EN61000-4-3, EN50082-1.
Electromagnetic Field Immunity (EMI)
Less than ±0.25% of output span effect under the
influence of electromagnetic fields from switching
solenoids, commutator motors, and drill motors.
Electrical Fast Transient (EFT)
EN61000-4-4, EN50082-1.
Surge Withstanding Capability (SWC)
EN61000-4-5, EN50082-1.
Electrostatic Discharge (ESD)
EN61000-4-2, EN50082-1.
Radiated Emissions
EN50081-1 for Class B equipment.
Approvals
CE, UL listed (USA, Canada).
UL3121 - general product safety.
I Configuration
Software Configuration
Units are fully programmable via the Windows
XP/Vista/7 InliPack Configuration
Program. Configuration downloads from PC through
EIA232 serial port using Acromag 800C-SIP kit.
Field Configuration
Output, zero/full-scale, relay setpoint and deadband are
configurable via push-buttons and a standard calibrator.
LED Indicators
LEDs indicate power, status, calibration, and alarm.
I Physical
Enclosure
Case: Self-extinguishing NYLON type 6.6 polyamide ther-
moplastic UL94 V-2 NEMA Type 1 enclosure.
Connectors (Removable Terminal Blocks)
Wire Range: AWG #14-22 (AWG #12 stranded only).
Printed Circuit Boards
Military grade FR-4 epoxy glass circuit board.
Dimensions
1.05W x 4.68H x 4.35D inches.
26.7W x 118.9H x 110.5D millimeters.
Shipping Weight
1 pound (0.45 Kg) packed.
I Ordering
Information
IMPORTANT: All InliPacks require initial soft-
ware configuration (order 800C-SIP).
See Note 1 below.
811T-0500
InliPack transmitter unit (DC voltage/current input).
811T-1500
Same as above, plus an SPDT relay output.
5020-350
AC current sensor. Required for AC current inputs.
See Page 205 for more information.
800C-SIP
Software Interface Package.
Only one kit is required for all InliPack models.
See diagram on Page 83 for included parts.
5034-225
USB-to-RS232 adapter. See page 121 for more info.
PS5R-D24
Power supply (24V DC, 2.1A).
See Power Supplies on Page 199.
TBK-B01
Optional terminal block kit, barrier strip style, 2 pcs.
(For use with 811T-0500 model.)
TBK-B02
Optional terminal block kit, barrier strip style, 4 pcs.
(For use with 811T-1500 model with alarm.)
TBK-S01
Optional terminal block kit, spring clamp style, 2 pcs.
(For use with 811T-0500 model.)
TBK-S02
Optional terminal block kit, spring clamp style, 4 pcs.
(For use with 811T-1500 model with alarm.)
NOTE 1: To order factory configuration, call Acromag
for a configuration form which must accompany your
order. Also, append “-C” to model number (example:
811T-1500-C). 800C-SIP kit is still recommended.
Optional terminal blocks: barrier strip (left) and
spring clamp (right). Cage clamp terminal is standard.
I n t e l l i P a c k
®
8 0 0 S e r i e s
94
InliPack ®
841T
Transmitters
Frequency,
Pulse Counter Input
Models
841T-0500: Frequency input transmitter
841T-1500: Transmitter with limit alarm
Input Ranges
Sensor types: TTL, dry contact, open collector
NPN/PNP, NAMUR, magnetic pickups, proximity
Frequency: 0 to 100Hz, 0 to 1KHz, 0 to 50KHz
Pulse: 0 to 65535 pulses
Output Ranges
0 to 1mA, 0 to 20mA, 4 to 20mA DC
0 to 5V, 0 to 10V DC
Limit Alarm
SPDT electro-mechanical relay (-1500 unit only)
Power Requirement
10 to 36V DC
Approvals
CE marked. UL, cUL listed.
I Description
These transmitters isolate and convert sensor
inputs to noise-free, proportional DC current
or voltage output signals. An optional relay
output adds a local limit alarm function.
Each unit offers a selection of input and out-
put ranges, as well as several signal condi-
tioning options. This flexibility enables a sin-
gle InliPack to handle a broad range of
applications. As your needs change, you can
easily reconfigure the unit for different
ranges or functions.
Setup is very easy. InliPack modules are
quickly configured with the user-friendly
Windows software program. Field adjust-
ments are simple with the module’s front-
panel push-buttons and status LEDs. Once con-
figured, InliPacks operate
independent of any host computer.
I Special Features
I High-resolution Sigma-Delta A/D converter
delivers high accuracy with low noise.
I Advanced microcontroller provides inligent
signal processing power for linearization,
averaging, and square root computations.
I Windows XP/Vista/7 software
configuration speeds setup and replacement.
I Multi-purpose inputs and outputs reduce
spare stock requirements.
I Relay output option provides local
limit alarm capability.
I Performance
I General Input
Resolution
Input Range Resolution
0 to 100Hz 0.01Hz
0 to 1000Hz 0.1Hz
0 to 50,000Hz 1Hz
0 to 65,535 pulses 1 pulse
Noise Rejection
Common Mode: Better than 80dB @ 60Hz.
Input Response Time (for input step change)
-3dB @ 35KHz.
Input Overvoltage Protection
Bipolar Transient Voltage Suppressors (TVS).
Continued on next page.
Input
Alarm
N.O.
COM
N.C.
Isolation
Signal
Conditioning
and
Inligent
Transfer
Functions
SPDT Relay
(841T-1500)
DC Voltage or
Current Ouput
Power
10 - 36V DC
+
R L
Output
Power
+
Voltage
Out
R L
Current
Out
I+
JMP
V+
RTN
DC-
DC+
V+ V+
+
-
or
Frequency
Generator
Frequency or
TTL Signal Dry Contact
Speed
or Flow
Sensor
Magnetic Pickup or
Turbine Flowmeter
OR
Open Collector
NPN
Open Collector
PNP
NAMUR
CRST
CRTN
BRTN
FQ-IN
EXC+
EXC-
CRST
CRTN
BRTN
FQ-IN
EXC+
EXC-
CRST
CRTN
BRTN
FQ-IN
EXC+
EXC-
CRST
CRTN
BRTN
FQ-IN
EXC+
EXC-
CRST
CRTN
BRTN
FQ-IN
EXC+
EXC-
CRST
CRTN
BRTN
FQ-IN
EXC+
EXC-
Transmitter w/alarm
95
S i g n a l C o n d i t i o n e r s
InliPack ®
I Performance
I Frequency Input
Input Types
TTL, dry contact, open collector NPN/PNP, NAMUR, mag-
netic pickups, proximity sensors.
Frequency Ranges
0 to 100Hz
0 to 1000Hz
0 to 50,000Hz.
Pulse Counter Input Range
0 to 65535 pulses.
Minimum Input Pulse Width
Frequency inputs: 10µS.
Pulse counting inputs: 5mS.
Voltage Ranges
Unipolar: 0 to 100V DC.
Bipolar: ±50mV to ±100V peak.
Zero/Full Scale Adjustment
Zero and span: * full range adjustment.
Pulse counting: Up to 65535 spans within range.
Input Threshold/Hysteresis
Bipolar:
Threshold: 0.01V, typical.
Hysteresis: ±25mV or ±83mV.
Unipolar:
Threshold: 1.5V or 5V.
Hysteresis: ±25mV or ±83mV
Input Debounce (Event Counter)
0 to 1000mS (configurable in 5mS increments).
Frequency Excitation Supply
Selectable, +8.2V or +12V @ 15mA.
Input Impedance
35K ohms, typical.
Accuracy
Input Range Accuracy
0 to 100Hz ±0.04Hz
0 to 1000Hz ±0.4Hz
0 to 50,000Hz ±10Hz
0 to 65,535 pulses ±1 pulse
I Output (DC V/mA)
D/A Converter
16-bit Σ−?.
Current Output
Ranges: 0-1mA, 0-20mA, 4-20mA.
Compliance: 10V minimum (500? load).
Accuracy: 0.025% of span.
Voltage Output
Ranges: 0-5V, 0-10V.
Compliance: 10mA maximum with short circuit pro-
tection. 1 ohm output impedance.
Accuracy: 0.025% of span.
Accuracy (overall input to output)
0.075% of span.
I Output (Relay)
Relay
One SPDT electro-mechanical relay.
Relay Ratings (CSA ratings)
25V DC @ 5A.
120/240V AC @ 5A.
Relay Time Delay
Adjustable alarm delay of up to 25 seconds.
Contact Material
Silver-cadmium oxide (AgCdO).
Expected Mechanical Life
20 million operations.
I Environmental
Ambient Temperature
Operating: -25 to 70°C (-13 to 158°F).
Storage: -40 to 85°C (-40 to 185°F).
Relative Humidity
5 to 95%.
Power Requirements
10 to 36V DC. 100mA @ 24V. 160mA @ 15V.
Isolation (optical)
4-way (input/output/relay/power).
1500V AC for 60 seconds or 250V AC continuous.
Radiated Field Immunity (RFI)
EN61000-4-3, EN50082-1.
Electromagnetic Field Immunity (EMI)
Less than ±0.25% of output span effect under the
influence of electromagnetic fields from switching
solenoids, commutator motors, and drill motors.
Electrical Fast Transient (EFT)
EN61000-4-4, EN50082-1.
Surge Withstanding Capability (SWC)
EN61000-4-5, EN50082-1.
Electrostatic Discharge (ESD)
EN61000-4-2, EN50082-1.
Radiated Emissions
EN50081-1 for Class B equipment.
Approvals
CE, UL listed (USA, Canada).
UL3121 - general product safety.
I Configuration
Software Configuration
Units are fully programmable via the Windows
XP/Vista/7 InliPack Configuration
Program. Configuration downloads from PC through
EIA232 serial port using Acromag 800C-SIP kit.
Field Configuration
Output, zero/full-scale, relay setpoint and deadband are
configurable via push-buttons and a standard calibrator.
LED Indicators
LEDs indicate power, status, calibration, and alarm.
I Physical
Enclosure
Case: Thermoplastic UL94 V-2 NEMA Type 1 enclosure.
Connectors (Removable Terminal Blocks)
Wire Range: AWG #14-22 (AWG #12 stranded only).
Printed Circuit Boards
Military grade FR-4 epoxy glass circuit board.
Dimensions and Shipping Weight
1.05W x 4.68H x 4.35D in. (26.7 x 118.9 x 110.5 mm)
1 pound (0.45 Kg) packed.
I Ordering
Information
IMPORTANT: All InliPacks require initial soft-
ware configuration (order 800C-SIP).
See Note 1 below.
841T-0500
InliPack transmitter unit (freq/pulse counter input).
841T-1500
Same as above, plus an SPDT relay output.
800C-SIP
Software Interface Package.
Only one kit is required for all InliPack models.
See diagram on Page 83 for included parts.
5034-225
USB-to-RS232 adapter. See page 121 for more info.
PS5R-D24
Power supply (24V DC, 2.1A).
See Power Supplies on Page 199.
TBK-B01
Optional terminal block kit, barrier strip style, 2 pcs.
(For use with 841T-0500 model.)
TBK-B02
Optional terminal block kit, barrier strip style, 4 pcs.
(For use with 841T-1500 model with alarm.)
TBK-S01
Optional terminal block kit, spring clamp style, 2 pcs.
(For use with 841T-0500 model.)
TBK-S02
Optional terminal block kit, spring clamp style, 4 pcs.
(For use with 841T-1500 model with alarm.)
NOTE 1: To order factory configuration, call Acromag
for a configuration form which must accompany your
order. Also, append “-C” to model number (example:
841T-1500-C). 800C-SIP kit is still recommended.
Optional terminal blocks: barrier strip (left) and
spring clamp (right). Cage clamp terminal is standard.
I n t e l l i P a c k
®
8 0 0 S e r i e s
96
InliPack ®
851T
Transmitters
Strain Gauge,
Load Cell Input
Input
Sensor types
Load cells (4- or 6-wire configurations),
Strain gauges (full-, half-, or quarter-bridge),
Millivolt
Bridge/gauge resistance
Supports 85 ohms or greater with 10V excitation
Input sensitivity
Accepts load cell and strain gauge rated outputs
up to 10mV/V DC
Internal excitation
Adjustable from 4 to 11V DC, 120mA max.
Output
Universal output
0 to 20mA (user-configured ranges),
0 to 10V DC (user-configured ranges),
Relay Output (optional)
5A SPDT dry contact relay
Power Requirement
12 to 36V DC
Approvals
CE marked. UL, cUL listed.
I Description
InliPack strain gauge and load cell transmitters
offer many powerful features beyond the limited
capabilities found in typical bridge amplifiers.
851T models accept signals from sensors wired
in a Wheatstone bridge configuration. Common
uses include measurement of force, weight, level,
torque, acceleration, pressure, and vibration.
The transmitter’s input circuit allows true 6-wire
bridge measurement and includes an adjustable
bridge excitation supply (4 to 11V DC) with a
remote sense feature. Sense wires ensure the
programmed excitation voltage is applied at the
sensor and enable lead-wire compensation. The
differential input performs true ratiometric con-
versions for extremely stable measurements that
remain accurate over time and temperature. Plus,
lead break detection is inherent in the device.
Inlipack configuration software simplifies setup
for use with basic load cells, millivolt inputs, or
seven bridge sensor formats. Internal bridge
completion resistors are supplied for half and
quarter bridges. The software also downloads
sensor parameters such as gauge factor and
Poisson's ratio into the transmitter for internal
calculation of complex equations to determine
sensor strain (ε). The strain is then converted to a
representative process signal output.
Screw terminals enable a remote "auto-tare"
function to compensate for non-zero dead
weights and other sensor offsets (e.g. container
weight or bridge imbalances). Alternatively, these
same screw terminals may be used to reset
latched relay alarms.
All these powerful features combined with
Acromag's user-friendly configuration software,
make the 851T a versatile device that's easy to
use and maintain. Plus, a rugged, compact
design makes it ideal for use out in the field, on
the plant floor, or inside a laboratory.
I Special Features
I Inligent signal processing functions
perform math computations for custom output:
- strain (ε) calculations
- signal linearization (25 breakpoints)
- average signal computation
I Relay output option provides local limit alarm
capability in addition to the DC output
I Adjustable bridge excitation supports a wide
variety of sensor types
I An internal bridge completion function
(half-to-full and quarter-to-full) accommodates
a broad range of applications
I Remote auto-tare function compensates for
extraneous loads and corrects for imbalances
in the input bridge
I High-resolution Sigma-Delta A/D converter
delivers high accuracy with low noise.
I Windows XP/Vista/7 software
configuration speeds setup and replacement.
Strain Gauge / Load Cell Transmitter with Alarm
DC OUT
SPDT
PWR
PLC / DCS
5-way
isolation
BRIDGE INPUTS?
R-CAL?
TERMINATION
AUTO-TARE
Trigger Input (15-30V DC)
Tare?
Trigger
R LOAD
V/mA
R-Cal
exc +
sense +
bridge +
bridge –
exc –
sense –
Alarm/
Control
Full, Half, Qtr, Load Cell, mV?
Exc ADJ : 4-11V DC
12-36V DC
Bridge Interface
97
S i g n a l C o n d i t i o n e r s
InliPack ®
FULL-BRIDGE INPUT (INTERNAL EXCITATION)
FULL-BRIDGE INPUT (EXTERNAL EXCITATION)
HALF-BRIDGE INPUT
QUARTER-BRIDGE INPUT
TB1
SENSE+
EXCITATION+
BRIDGE-
SENSE-
EXCITATION-
BRIDGE+
SEN+
IN+
IN-
SEN-
EXC-
EXC+
TB1
EXC+
EXC-
SEN-
IN-
IN+
SEN+
JUMPER
SENSE+
BRIDGE+
BRIDGE-
SENSE-
JUMPER
4-11V +
EXC+
TB1
EXC+
IN+
SEN+
QUARTER
BRIDGE
ADD JUMPER FOR
QUARTER-BRIDGE
COMPLETION
JUMPER
EXC-
SEN-
TB2
IN-
EXC-
2K
2K
DUMMY
GAUGE
2K
2K
HALF
BRIDGE
TB2
SEN+
EXC+
EXC-
TB1
IN+
SEN-
EXC+
IN-
IN+
EXC-
HALF
IN-
IN+
HALF
IN-
IN+
JUMPER
AD D J U MP ER
FOR HALF-BRID GE
COMP LETION
I N TE RN AL
H A LF -
B R ID GE
R A TI O-
M ATCHED
T O ±0.02 %
I N TE RN AL
H A LF -
B R ID GE
R A TI O-
M ATCHED
T O ±0.02 %
DIGITAL INPUT "TRIGGER" (AUTO-TARE/RELAY RESET)
T R I G I N P U T I S O P T I C ALLY
I S OLA T ED A ND I NC LU D ES A
6.65K S ERI E S RE S IS T O R.
COM
TRI G
T B 4
6.65K
T R I G
T R I G I S A S S E R T E D FO R VOLT A G E S FR O M 1 5-
30V D C .
I N+
+ 15-30V
TRIG
N OTE : For 4- wire measureme nts,
jumper E X C+ to S EN S E+ and
jumper E X C- to S EN S E - .
TB 4
+
RELAY OUTPUT
LO AD
LO AD
N.C.
N.O.
S P D T CO NTA CTS
N.O .
N.C .
C OM
SHUNT CALIBRATION (R-CAL)
S EN-
EXC-
TB1
TB2
EXC+
IN -
IN +
S EN+
S W
CR
HALF
IN-
IN+
*R- CAL
CR /B
BRID GE +
S ENS E+
EXC+
S ENS E-
BRID GE -
EXC-
S HU NT
ENABLE
TO BRID GE
* R-CAL S HU NT RES IS TOR IS U S ER-S U P P LIED
Isolation
+
R L
Bridge Input
Output
Signal
Conditioning
and
Inligent
Transfer
Functions
DC Voltage or
Current Ouput
Power
10 - 36V DC
Power
Alarm / Trigger
N.O.
COM
N.C.
COM
COM
TRIG
EXC +
SEN +
IN +
IN -
SEN -
EXC -
+
Voltage
Out
R L
Current
Out
I+
JMP
V+
RTN
DC-
DC+
SPDT Relay
(851T-1500)
Trigger
Auto-Tare
Bridge Complete
Shunt
IN -
HALF
IN +
SW
CR
CR / B
The configuration software makes it easy to set up the
transmitter for use with
basic load cell sensor devices. Common input sources
include pressure transducers,
torque converters, and vibration sensors.
Complex strain (ε) calculations are easily configured and
computed for full, half, and
quarter-bridge sensors.
I n t e l l i P a c k
®
8 0 0 S e r i e s
98
InliPack ®
851T
Transmitters
I Performance
I General Input
Analog to Digital Converter (ADC)
16-bit Σ−? A/D converter.
Resolution
±0.01% of span.
Input Reference Test Conditions
120 ohm full bridge; Excitation = 10V; Rated Output =
3mV/V; Range = ±30mV; Ambient Temperature =
25°C; Power Supply = 24V DC; Alarm Delay = 100ms.
Accuracy (overall input to output)
Better than ±0.1% of span, typical.
This value does not include sensor errors.
Ambient Temperature Effect
Better than ±0.01% of input span per °C
(±100ppm/°C), or ±1.0uV/°C, whichever is greater.
Response Time (for input step change)
250mS to 98% of final output value (into 500 ohms).
Input Overvoltage Protection
Bipolar Transient Voltage Suppressors (TVS).
I Bridge Input
Input Types
Select from basic load cell, two quarter-bridge options,
two half-bridge options, three full-bridge options, or
millivolts.
Input Span/Range
Bipolar input range is determined from the ± product
of the gauge's rated output and the nominal
excitation selection (2mV/V x 10V = ±20mV range).
Input Over-range
The actual input range is ±150% typical of the range
obtained via the ± product of the gauge's rated out-
put and the nominal excitation applied.
Input Sensitivity
Accepts gauge rated outputs up to 10mV/V. The range
of your input signal is the product of the excitation
voltage and your gauge's rated output.
Input Impedance
±IN at 1M ohms min.; ±SEN at 29.09K ohms, typical.
Input Lead Resistance
Module has sufficient overdrive to guarantee 10V
bridge excitation with 5 ohms/lead and 100mA of
internal excitation current. Larger lead resistances may
limit the maximum achievable bridge excitation.
Input Lead Break Detection
Sensor failure detection is upscale only.
Input Bridge Excitation (Internal)
Adjustable from 4V to 11V, 120mA maximum. Internal
excitation may be turned OFF for external excitation
supply connection.
Input Bridge Excitation (External)
4V to 11V. The internal excitation must be turned OFF
for connection to an external excitation supply.
I Digital (Trigger) Input
Input Type
“Active High” input.
15-30V DC (6.65K ohms).
See connection diagram.
Operation (Tare/Alarm Modes)
The trigger function is set for “Auto-Tare” mode by
default. This input can also be configured to reset
latched alarms via the Configuration Software.
I Output (DC V/mA)
D/A Converter
16-bit Σ−?.
Current Output
Ranges: 0-1mA, 0-20mA, 4-20mA.
Compliance: 10V minimum (500 ohm load).
Voltage Output
Ranges: 0-5V, 0-10V.
Compliance: 10mA maximum with short circuit pro-
tection. 1 ohm output impedance.
I Output (Relay)
Relay
One SPDT, Form C, dry contact relay.
Relay Ratings (CSA ratings)
25V DC @ 5A, resistive load.
120/240V AC @ 5A, resistive load.
Relay Time Delay
Adjustable alarm delay of up to 25 seconds.
Relay Response (No Relay Time Delay)
Relay contacts switch within 580ms typical, for an
input step change from 10% of span on one side of
an alarm point to 5% of span on the other side of the
alarm point.
Initial Dielectric Strength
1000V AC rms between open contacts.
Contact Material
Silver-cadmium oxide (AgCdO).
Expected Mechanical Life
20 million operations.
Performance specifications continued on next page.
99
S i g n a l C o n d i t i o n e r s
InliPack ®
I Environmental
Ambient Temperature
Operating: -25 to 70°C (-13 to 158°F).
Storage: -40 to 85°C (-40 to 185°F).
Relative Humidity
5 to 95%.
Power Requirements
12 to 36V DC. 11V DC minimum.
175mA @ 24V. 290mA @ 15V.
Isolation (optical)
5-way (input/output/relays/trigger/power).
Input, analog output, trigger, and power circuits are
isolated from each other for up to 1500V AC for 60
seconds or 250V AC continuous. Optional relay
outputs are isolated from other circuits up to 150V
AC, or 150V DC.
Radiated Field Immunity (RFI)
EN61000-4-3, EN50082-1.
Electromagnetic Field Immunity (EMI)
Less than ±0.25% of output span effect under the
influence of electromagnetic fields from switching
solenoids, commutator motors, and drill motors.
Electrical Fast Transient (EFT)
EN61000-4-4, EN50082-1.
Surge Withstanding Capability (SWC)
EN61000-4-5, EN50082-1.
Electrostatic Discharge (ESD)
EN61000-4-2, EN50082-1.
Radiated Emissions
EN50081-1 for Class B equipment.
Approvals
CE, UL listed (USA, Canada).
UL3121 - general product safety.
I Configuration
Software Configuration
Units are fully programmable via the Windows
XP/Vista/7 InliPack Configuration
Program. Configuration downloads from PC through
EIA232 serial port using Acromag 800C-SIP kit.
Field Configuration
Output, zero/full-scale, relay setpoint and deadband are
configurable via push-buttons and a standard calibrator.
LED Indicators
LEDs indicate power, status, calibration, and alarm.
I Physical
Enclosure
Case: Self-extinguishing NYLON type 6.6 polyamide ther-
moplastic UL94 V-2 NEMA Type 1 enclosure.
Connectors (Removable Terminal Blocks)
Wire Range: AWG #14-22 (AWG #12 stranded only).
Printed Circuit Boards
Military grade FR-4 epoxy glass circuit board.
Dimensions
1.05W x 4.68H x 4.35D inches.
26.7W x 118.9H x 110.5D millimeters.
Shipping Weight
1 pound (0.45 Kg) packed.
I Ordering
Information
IMPORTANT: All InliPacks require initial soft-
ware configuration (order 800C-SIP).
See Note 1 below.
851T-0500
InliPack transmitter unit, strain gauge input
851T-1500
Same as above, plus an SPDT relay output.
800C-SIP
Software Interface Package.
Only one kit is required for all InliPack models.
See diagram on Page 83 for included parts.
5034-225
USB-to-RS232 adapter. See page 121 for more info.
PS5R-D24
Power supply (24V DC, 2.1A).
See Power Supplies on Page 199.
TBK-B02
Optional terminal block kit, barrier strip style, 4 pcs.
TBK-S02
Optional terminal block kit, spring clamp style, 4 pcs.
NOTE 1: To order factory configuration, call Acromag
for a configuration form which must accompany your
order. Also, append “-C” to model number (example:
851T-1500-C). 800C-SIP kit is still recommended.
Optional terminal blocks: barrier strip (left) and
spring clamp (right). Cage clamp terminal is standard.
Dimensions
120
I n t e l l i P a c k
®
8 0 0 S e r i e s
InliPack ®
RUN
Acromag
DIN EN 50022, 35mm
"T" RAIL DIN MOUNTING
(59.4)
2.34
C
L
MODE
SET
1 2
RELAY
ST
(95.3)
3.75
RST 2
RST 1
R
1.05
(26.7)
NOTE: ALL DIMENSION ARE IN INCHES (MILLIMETERS)
(118.9)
4.68
SCREWDRIVER SLOT FOR
REMOVAL FROM "T" RAIL
(99.1)
3.90
4.35
(110.5)
121
Accessories
S i g n a l C o n d i t i o n e r s
InliPack ®
I Ordering Information
5020-350
AC current sensor (See page 205)
Barrier strip (left) and spring clamp (right).
I Ordering Information
See individual I/O modules for compatibility.
AC Current Sensor
50W Supply
Input Power Requirement
85 to 264V AC or 105 to 370V DC
Output
24V DC, 2.1A (50W)
I Ordering Information
PS5R-D24
Universal 50W power supply
See Power Supplies on Page 199 for other models
and more information.
DIN-Rail Mounting
For your convenience, Acromag offers several
mounting accessories to simplify your system
installation. Our 19” rack-mount kit provides a
clean solution for mounting your I/O modules
and a power supply. Or you can buy precut DIN
rail strips for mounting on any flat surface.
I Ordering Information
20RM-16-DIN
19" rack-mount kit with DIN rail.
DIN RAIL 3.0
DIN RAIL 16.7
DIN rail strip, Type T, 3 inches (75mm) or
16.7 inches (425mm)
Length: 3.15 in (8.0 cm)
Height: 0.80 in (2.03 cm)
Width: 1.75 in (4.44 cm)
Weight: 1.6 oz (45.36 g)
I Ordering
Information
5034-225
USB-to-RS232 adapter
3-position:
L = 0.66 inches (16.9 mm)
6-position:
L = 1.26 inches (32.3 mm)
Spring Clamp Terminal Blocks
Barrier Strip Terminal Blocks
TBK-B01
Terminal block kit,
two 6-position pieces
TBK-B02
Terminal block kit,
four 6-position pieces
TBK-B03
Terminal block kit,
one 3-position and
three 6-position pieces
3-position: L = 0.87 inches (22.3 mm)
6-position: L = 1.47 inches (37.7 mm)
Wire range:
AWG #12-26
Wire range:
AWG #12-26
Wire range:
AWG #12-26
TBK-S01
Terminal block kit,
two 6-position pieces
TBK-S02
Terminal block kit,
four 6-position pieces
TBK-S03
Terminal block kit,
one 3-position and
three 6-position pieces
Mounting Hardware Terminal Blocks Power Supplies
USB / RS232 Adapter
F l a t P a c k S e r i e s
AC Voltage and
AC Current Input
These models convert sensor inputs to propor-
tional process current or voltage output signals.
AC voltage transmitters accept direct voltage
inputs. Current models include an external AC
current sensor. This toroidal sensor outputs a safe
DC milliamp signal which transmits accuray
over long distances. Input span is a function of
the primary turns placed on the sensor.
Input Ranges
I AC voltage, 50/60Hz
0 to 150V AC
I AC current, 0 to 20A
Output Ranges
I DC current: 4 to 20mA
I DC voltage: 0 to 5V or 0 to 10V
Power Requirements
I 250T: 12 to 50V DC @ 20mA (loop-powered)
I 350T: DC voltage source (see table below)
Output range Power
4 to 20mA 10 to 36V DC @ 30mA
0 to 5V 10 to 36V DC @ 9mA
0 to 10V 12.5 to 36V DC @ 9mA
I 450T: 115V or 230V AC, ±10%, 50 to 60Hz
Output range Power
4 to 20mA 115V AC @ 0.050A
4 to 20mA 230V AC @ 0.025A
0 to 5V, 0 to 10V 115V AC @ 0.020A
0 to 5V, 0 to 10V 230V AC @ 0.010A
I Special Features
I Excellent accuracy and stability ensure reliable
measurements in harsh industrial environments.
I External AC current sensor with DC mA output
enables remote mounting of transmitter (for
safe monitoring of the AC signal)
I AC current range is a function of sensor
primary turns for easy rescaling in field
I Factory-calibrated AC current transmitter does
not need recalibration
I RFI and EMI resistance minimize the effects of
environmental noise.
I Compact, 1-inch wide housing uses less space.
I Low power consumption. (350T as low as 9mA).
I 1500V AC peak isolation (250V AC or 354V
DC continuous) prevents ground loops.
250T models:
Input isolated from output/power.
350T models:
Input isolated from output and power.
Output and power share a common.
450T models:
3-way isolation. Input, output, and power
circuits are isolated from each other.
I Performance
Ambient Temperature Range
Operating: -13 to 185°F (-25 to 85°C).
Storage: -40 to 185°F (-40 to 85°C).
Accuracy
±0.5% of calibrated span. Includes repeatability,
hysteresis, terminal point linearity, and adjustment
resolution.
Ambient Temperature Effect
Less than ±0.01% of output span per °F (±0.018% per
°C). (Specification includes the combined effects of zero
and span over temperature).
Noise Resistance
RFI: Less than ±0.5% ,of output span effect.
EMI: Less than ±0.25% of output span effect.
Noise Rejection
Common Mode (-VAC): 120dB at 60Hz, 100 ohm
unbalance.
Common Mode (-CACX): 120dB at 60Hz, 1 ohm
unbalance.
Normal Mode: Not Applicable.
Response Time
Output reaches 98% of output span in 300mS.
Bandwidth
-3dB at 3 Hz, typical.
Output Compliance
250T: R LOAD (max.) = (V SUPPLY - 12V) / 20mA.
350T: R LOAD (max.) = (V SUPPLY - 2.5V) / 20mA.
450T: R LOAD = 600 ohms.
OUT
PLC / DCS
Input
Isolation
IN
+
L
–
S
–
+
R LOAD
4-20mA
+
24V DC
P
Sense Resistor
Sensor
250T
250T Loop-Powered (2-wire) Transmitter
OUT
PWR
PLC / DCS
Input
Isolation
IN
+
L
–
P
–
+
R LOAD
24V DC
V/mA
P
–
+
Sensor
350T
350T DC-Powered (3-wire) Transmitter
PWR
OUT
PLC / DCS
3-Way
Isolation
IN
+
L
–
S
–
+
L1
G
W
R LOAD
V/mA
–
+
Sense Resistor
Sensor
450T
450T AC-Powered (4-wire) Transmitter
166
Flat Pack
Isolated Transmitters
I s o l a t e d T r a n s m i t t e r s
Input Options
-VAC: AC Voltage,
0 to 150V AC range,
Span adjust: 60 to 150V AC
Zero adjust: 0 to 90VAC
Input impedance 100k ohms
Input burden is 0.3 volt-amps
-CACX*: AC Current
AC Current Sensor (5020-350): One sensor is supplied
with each transmitter. The sensor is a high-accuracy
toroidal instrument transformer. See Page 205 for
more information.
AC Input Range Primary Turns Sensor Output
0 to 20 Amps AC 1 0 to 11.17 mA DC
0 to 10 Amps AC 2 0 to 11.17 mA DC
0 to 5 Amps AC 4 0 to 11.17 mA DC
0 to 1 Amps AC 20 0 to 11.17 mA DC
Input Burden: A function of the wire gauge resistance
used for the primary turns.
Input Overload: The AC Current Sensor withstands
overloads as follows: 20 times full-scale for 0.01 sec-
ond., 10 times full-scale for 0.1 second., and 5 times
full-scale for 1.0 second.
AC Current Sensor to Transmitter Wiring Distance:
400 feet maximum for 18 AWG wire gauge. Other
wire gauges can be used as long as the resistance of
both wires is less than 5.0 ohms.
Output Options (350T, 450T only)
-Y: 4 to 20mA DC.
-V0: 0 to 10V DC into 10K ohms or greater
-V5: 0 to 5V DC into 5K ohms or greater
Power Options (450T only)
-1: 115V AC power
-2: 230V AC power
Mounting Options
Mountings
-DIN: DIN rail G or T mount
-ST: SNAPTRACK mount [250T only]
-SM: Surface-mount [250T only]
External housings
-N4: NEMA 4, water-tight [250T only], holds two
-N12: NEMA 12, oil-tight [250T only], holds two
-XP: Explosion-proof NEMA 4 [250T only], holds one
相關產品
