德國BRINKMANN KTF52/300-051X+127泵
￥面議
北京康拉德科技有限公司
免費會員·4年您現在的位置： 北京康拉德科技有限公司>>泵>> MECCANICA PIACENZAMECCANICA PIACENZA GR32-SMT-75L-16B 螺桿泵
MECCANICA PIACENZAMECCANICA PIACENZA GR32-SMT-75L-16B 螺桿泵
| 參考價: | 面議 |
具體成交價以合同協議為準- MECCANICA PIACENZA 產品型號
- 品牌
- 0 廠商性質
- 北京市 所在地
訪問次數：111更新時間：2022-03-07 14:28:27
聯系我們時請說明是智能制造網上看到的信息，謝謝!
產品簡介
產品介紹
mecatraction 7512107 BA1420 壓接鉗
mecatraction 7511998 U137C12 壓接鉗
mecatraction HP3 鉗子
mecatraction Ref :SF126 插頭
mecatraction Ref : 1BR921 插頭
MECCANICA PIACENZA GR32-SMT-75L-16B 螺桿泵
Mecon 7ME5870-3AB00 medium:Air Range:0-30 m/s switch:off 0,5m/s
Mecon KONTAKT KM-43/SES-43Z.ANBAU STAUDEX 流量傳感器
MEDENUS RS250/200/485/115/MD 減壓閥
MEDER HE24-1A83 自動控制器MECCANICA PIACENZA GR32-SMT-75L-16B 螺桿泵
medexx TAM6142-5AT10-0FA0 變壓器
megacon KPC112E 24V.DC 自動控制器
megacon KPM161E2 Replacement for KPM161B instrument-serial 00237 固定電阻器
MEGAMOTIVE MAB40A 12 2410 編碼器
Megatron RC35 100 S R5K W20% L0,05%,Art.Nr. 112202 電位器
Megatron RC13 100 F 1 W20% L0,1% 電位器
Megatron XKZA15-10K-TC+POT. P15P/S30 - 10K OHMS
Megatron SPR18K 25 R5K 電位器
Megatron M409A 6 MM 編碼器
Megatron MM R 10 11 R5K W15% L1%,Art.-Nr. 109639 電位計
Megatron 103302 RP 20 R1K W3% L0,5% 電位計
Megatron MRX C T 50，Art.-Nr.119632
Megatron Anschlussdose SW61,M16 gerade 5pol IP67,Art.Nr. 110906 電位器附件
Megatron MRX C 50，Art.-Nr.119390
MEGATRON Elektronik AG & Co XKZA15 4K7-TC+ 電位計
MEGATRON Elektronik AG & Co. | GB MEGATRON Industriesensorik 812 251 A1P (127164) 電位計
MEGGER MIT420 絕緣檢測儀
Meihaus Electronic ME-1400E 總線模塊
Meilhaus Electronic DS1M12 電纜
MEILI 33.7000.01 手動絞盤
Meister DKM-2/7 G 1/2",NO:51XE2007XG15S 流量傳感器
Meister DWG-1,5 ,G 1/2",NO:20XM0001XG15S 流量傳感器
Meister Artikel-Nr.SG-30BLA-1.5A-W 感應傳感器
Meister Straemungstechnik GmbH DKG-1/8 G 3/4" 45XM1008XG20S 流量傳感器
Meister Straemungstechnik GmbH DKM-1/90 G 1" 流量傳感器
Meister Straemungstechnik GmbH DWG-3 G 1/2 Art_No.20XM0003XG15S 流量傳感器
Mel MI250B/NJ25-25M 接近開關
Mel MI250B/NJ25-15m 接近開關
MEL Mikroelektronik GmbH MI250/NJ25-15M 接近開關
MEL Mikroelektronik GmbH MI250-B/NJ25-10m 接近開關
MEL Mikroelektronik GmbH MI250B/NJ20-20m 接近開關
MEL Mikroelektronik GmbH MI250-B/NJ25-7M 接近開關
MEL Mikroelektronik GmbH MI250-B/NJ20-10m 接近開關
MEL Mikroelektronik GmbH 342020 MI250-B/NJ20-20m 接近開關
ME-Messsysteme GmbH GSV-2ASD -5+5/250/2 信號放大器
ME-Messsysteme GmbH KD9363S 100kg 負荷傳感器
ME-Messsysteme GmbH GSV-1A ±10/250/3,5 信號放大器
MEN 04M062N01 總線模塊
MEN 04M036N00 總線模塊
MEN 04M047-00 通訊模塊
MEN 01A201S12 通訊模塊
MENZEL INDUTEC MS0-D6 AL 9500006000 減壓閥
MENZEL INDUTEC MS VT5-1 O 24V/DC 9661151024 減壓閥
MENZEL SD4,NR.58963 節流閥
MENZEL Koaxialsprühkopf INDUTEC ? MS SD4 Artikel Nr. 9100000001 噴嘴
MENZEL MSMV3/2-A 油壓傳動閥MECCANICA PIACENZA GR32-SMT-75L-16B 螺桿泵
MENZEL INDUTEC MS EHN 9500000260 減壓閥
MENZEL INDUTEC MS F D6 VS 9500000126 減壓閥
MENZEL SDV4-M/9500000001 節流閥
MENZEL SDV4-Z/9500000036 節流閥
KT 210 / max. 2048 TP
max. 12 VDC / 10 mA
KT 230 / max. 256 TP
max. 1000 VDC / 400 mA
NT 210 / max. 2048 TP
max. 12 VDC / 10 mA
NT 230 / max. 256 TP
max. 1000 VDC / 400 mAKT 410 / max. 16384 TP
max. 25 VDC / 25 mA
KT 630 / max. 1024 TP
max. 1500 VDC / 2 A
max. 1050 VAC / 5 mA
KT 638 / max. 512 TP
max. 1500 VDC / 2 A
KT 644 / max. 1024 TP
max. 2150 VDC / 1500 VAC
NT 410 / max. 16384 TPMECCANICA PIACENZA GR32-SMT-75L-16B 螺桿泵
max. 25 VDC / 25 mA
NT 600 / max. 5120 TP
max. 1500 VDC / 2 A
max. 1050 VAC / 5 mA
NT 600 TPI/FPI / max. 5120 TP
max. 1500 VDC / 2 A
max. 1050 VAC / 5 mA
NT 637 / max. 512 TP
max. 1500 VDC / 2 A
max. 1050 VAC / 5 mANT 700 / max. 32768 TP
max. 6000 VDC / 2 A
max. 5000 VAC / 30 mA
NT 830 - HV Distributed Test
max. 131072 TP
max. 1500 VDC / 2 A
max. 1050 VAC / 5 mA
NT 850 - HV Distributed Test
max. 131072 TP
max. 6000 VDC / 2 A
max. 5000 VAC / 30 mAKT 235 - Multibox / max. 512 TP
max. 1000 VDC / 400 mA
NT 235 - Multibox / max. 512 TP
max. 1000 VDC / 400 mA
NT 730 LTM / max. 256 TP
max. 1000 VDC / 2 ANT 910 / NT 920 - Direct Test
max. 131072 TP
max. 250 VDC / 100 mAOLT 880 Test tables
new: TD0800 - functional - economic - compact
Test Consoles PT 60 , PT 40
Adapter console AP01
Adapter console AP02-3 for multifunctional adapter boards adaptronic-Hand-Adapter.pdf
adaptronic-Rigging-Harness .pdf
ECU Tuning Software, Help Doco, Firmware
Modular and Select ECUs
Eugene – Adaptronic Engine Management Software (Latest beta release)
Modular ECU basemap
Quick Download for Select and e420c ECUs (Select includes 440, e420d and plug-ins)
ECU Tuning Software, Help Doco, Firmware
Select and e420c
Latest Download (version 14.000)
Note: Please check the revision history below
Quick Download for e1280s ECU
ECU Tuning Software, Help Doco, Default Configuration, Firmware/Package
e1280s Latest Download (version 3.000)
Quick Download for Installation and Startup guides
A. Wire-in ECUs
ECU Pinout document
(.pdf)
Wiring diagram
(.pdf)
Basemap
(.ecu)
e420d Universal Select ECU 420_Pinout 420_Wiring Uni420_BaseMap
e440d Universal Select ECU 440_Pinout 440_Wiring Uni440_BaseMap
e1280s Fully Configurable ECU e1280s_Pinout e1280s_Wiring e1280sDefaultConfig
B. Plugin ECUs
Maker Model Series Pinout/Setup Guide (.pdf) Basemap (.ecu)
Dodge Neon SRT-4 SRT4 SRT4_Sel_Basemap
Mazda MX5 / Miata NA8C MX5NA8_Sel_pinout and setup guide MX5NA8_Sel_BaseMap
Mazda MX5 / Miata NB8A MX5NBA_Sel_pinout and setup guide MX5NBA_Sel_BaseMap
Mazda MX5 / Miata NB8B MX5NBB_Sel_pinout and setup guide MX5NBB_Sel_Basemap
Mazda MX5 / Miata NB8C-SE MX5NBB_Sel_pinout and setup guide MX5NBBSE_Sel_Basemap
Mazda MX5 / Miata NB8C-SP MX5NBB_Sel_pinout and setup guide MX5NBBSP_Sel_Basemap
Mazda RX7 Series 4 RX7_S4_Sel_pinout and setup guide RX7_S4_Sel_Basemap
Mazda RX7 Series 5 RX7_S5_Sel_pinout and setup guide RX7_S5_Sel_Basemap
Mazda RX7 Series 6 RX7_S6_Sel_pinout and setup guide RX7_S6_Sel_Basemap
Mazda RX7 Series 8 RX7_S8_Sel_pinout and setup guide RX7_S8_Sel_pinout
Mazda RX8 Series 1 RX8_Sel_pinout and setup guide RX8_Sel_Basemap
Mitsubishi Lancer EVO 4-8 EVO4-8 Evo_BaseMap
Nissan 300ZX Z32 R33_Sel_15_pinout and setup guide Z32_Sel_BaseMap
Nissan Silvia S13 180SX
(Redtop)
S13_Sel_pinout and setup guide S13_Sel_BaseMap
Nissan Silvia S13 180SX / 200SX
(Blacktop)
S15_Sel_pinout and setup guide S13x_Sel_BaseMap
Nissan Silvia S13 240SX 240SX_Sel_pinout and setup guide 240SX_GTiR_Sel_Basemap
Nissan Silvia S14 200SX/240SX S14_Sel_pinout and setup guide S14_Sel_BaseMap
Nissan Silvia S14a 200SX S15_Sel_pinout and setup guide S14a_Sel_BaseMap
Nissan Silvia S15 200SX S15_Sel_pinout and setup guide S15_Sel_BaseMap
Nissan Skyline R32 (GTST) R33_Sel_15_pinout and setup guide R32_Sel_15_BaseMap
Nissan Skyline R33 (GTST) R33_Sel_15_pinout and setup guide R33_Sel_15_BaseMap
Nissan Skyline R32 / R33/ R34 GTR R33_Sel_15_Pinout and setup guide R32R33R34_GTR_Basemap_15
Nissan Pulsar GTiR 240SX_Sel_pinout and setup guide 240SX_GTiR_Sel_Basemap
Nissan Skyline R34 GTT R34_Sel_pinout and setup guide R34_Sel_BaseMap
Suzuki Swift GTI Swift_Gti_Sel_pinout and setup guide GTI_Sel
Toyota MR2 SW20 SW20_MR2_Sel_pinout and setup guide sw20_Basemap
Previous Firmware Versions for Select and e420c ECUs
440_ECU_Mini
select pnp
Earlier versions & revision history
V14.000 (2015-June-12)
Increase current output on injector drive (will have the effect of reducing the deadtime so people upgrading from V12 or 13 will need to recheck their tune).
Added compatibility with NTK AFRM on 0-5V input, and AEM on narrowband input with external voltage divider
Added imperial unit output for Race Technology dashes
Added enrichment persistence on transient throttle correction and made throttle change detection more sensitive
Added output for SRT4 dash
Added option to close idle valve when engine is on boost (for 1JZ VVTI engines)
Added variable dwell time
Added support for manual staging when injector sizes have been entered (VE mode or not)
V13.000 (2014-Oct-17)
Added triggers for Rover Mini, Dodge SRT4, and crank-only trigger for LS1
Added ethanol percentage output on Race Technology output
Added specific rotary timing lock check for rotaries (leading @ 5°ATDC, 20°ATDC)
Added linear idle effort vs alternator load for NB MX5 / Miata
Added gentle pulsing of thermofan for less sudden electrical load for NB MX5 / Miata
Changed 3-level injector staging for wire-in ECUs so it behaves the same as on the RX8 plug-in
Added readback / verify for communications writes to fix map and boost control errors
V12.000 (2014-Apr-10)
Arbitrary RPM / load spacing on fuel / ignition maps
Variable injection timing
Various trigger modes (improved Nissan, Mitsubishi Triton, Nissan M35/VQ35, xJZGTE VVTI
Higher resolution flex fuel tuning
Faster communications
Higher resolution TPS and MAP for logging / display
Innovate SSI4 input, oil, fuel pressure monitoring and engine protection
Various improvements in transient throttle (open loop fuel during transition, disable pump on constant throttle, additional async when cold)
PLX wideband input, PLX gauge output
Motec PLM input
Direct mode Race Technology output (no need for ECU interface now)
Basemaps and pinouts for for RX7 plug-in ECUs
Improved large plenum charger mode for supercharged engines, smoothness / antiflare on throttle off / upshifts
Individual percentage point ignition cut mode for smoother traction control
Twin turbo control / precontrol output for twin turbo RX7
Injector characterisation built-in for Injector Dynamics injectors
V10.000 (2011-Sep-07)
Added improved handling of missing tooth triggers on Select ECUs
Added software debouncing of VSS inputs on Select ECUs
Added oil metering control for Select ECUs
Support for additional plug-in Select ECUs
Additional RPM control algorithms for really large plenum engines (eg post-throttle supercharger and intercooler systems)
Added selectable MAP input filtering
Implemented crank angle period tracking for detecting trigger setup problems
Implemented automatic injector staging with VE tuning
Implemented automatic wasted spark on 4-cylinder direct fire engines until cam trigger is detected
Implemented 2nd serial port sharing to allow OBD/CAN interface and Innovate to share serial port
Added push-to-pass (scramble boost)
Added pit lane speed limiter
Added option to automatically detect neutral if no RPM matches the gear ratios
V9.000 (2010-Nov-02) (included in V10 download, no separate link)
Added ignition timing idle control option
Changed firmware to remove cylinder updating on SR20/RB2x above 2000 RPM, improved the stability of triggering on Nissans
Fixed Ign 4 (on Aux 1) behaviour at power-up
Fixed ‘ign crank’ triggering option with all ignition modes and forced only to operate on last trigger BTDC (so the Ign Crank option can now be used for all trigger patterns, to improve ignition timing stability at cranking)
V8.000 (2010-Sep-23)
Added a ‘Safe MAP’ variable to handle conditions where MAP sensor reading is invalid, now utilising the predicted MAP table for more than just transient throttle
Improved the stability of triggering on Nissans and Mazda RX-8s
Added secondary VSS functionality (so digital inputs 7 and 8 can be used as MVSS2 and SVSS2, only useful for traction control)
Fixed bug where having the same digital input type on multiple inputs didn’t act like an ‘OR’ (bug introduced in V7.000)
V7.000 (2010-Aug-30)
Added debouncing on A/C request input to help prevent on/off A/C cycling problem introduced with the delayed A/C output behaviour in V6.000
Fixed up Holden V6 triggering
V6.000 (2010-Jul-15)
Added delayed A/C output behaviour (approx 800ms hardcoded) to improve idle speed stability
Added another condition for the purge valve output where it will turn off when on boost
Further improved EEPROM code
V5.000 (2010-Jun-11)
Fixed PRCV output
Fixed idle anti-windup when at max duty cycle (previously only worked on min duty cycle)
Further improved EEPROM code
Added ignition arbitration output on Inj 4, for Supra PnP loom only
Fixed VVT target angles based on 3D tables instead of 2D RPM tables
V4.000 Removed from website straight away for commissioning.
V3.000 (2010-Feb-25)
Improved robustness of code for communications between microcontroller and EEPROM chip, to better handle electrical interference, and prevent potential ECU resetting or settings corruption
Added Ignition Output test function (on ‘ECU Data’ window in WARI, with the Injector Test buttons)
V2.000 (2009-Dec-15) – WARI Version 2.000
Added Volumetric Efficiency tuning
Added EGT-based aux outputs
Added ignition firing after TDC
Optimised Nissan 4 and 6 cylinder unique triggers, particularly for faster starting
Added optional filter with 1 second time constant for temperature inputs
Updated the idle control functionality (fixed A/C idle-up, enabled separate idle efforts to be added for different elec load inputs, changed the target RPM strategy to take the highest of the additional RPM values rather than the sum).
Added MAP prediction “drive by wire” mode for less sensitive throttle thresholds
Added ELM327 mode for once only at startup
Added 0-4V Autometer ES PRO calibration on external input
Added calibration for Jaycar KC5486 0-5V oxygen sensor on external input
Added calibration for Dynojet 0-5V oxygen sensor on external input
V1.0Q (2009-Aug-17) – WARI Version V1.13
Added MAP prediction for greatly improved and simplified transient throttle behaviour
V1.0P (2009-Aug-10) – WARI Version V1.12
Corrected tacho on aux output for 50% duty cycle
Added transient throttle ignition advance
Added logic-only inputs based on logic-only outputs
Added boost duty cycle scaling based on percent TPS
Removed ‘Enable Datalogging’ input feature
Added aux output based on battery voltage
Improved MAP and TPS resolution, now 1/16 of a kPa or Percent for interpolation
Removed MAP filter
Corrected bug with the closed-loop fuel max TPS
Added 2-rotor wasted leading, alternate/DF trailing mode
Added 2-rotor direct fire mode
Added ELM327 Scantool error correct mode @ 38400 baud
Added new tuning mode: 1=MAP, 2=MAP, Pri = 1, Sec = 1×2, Ign = 1
also added injector 3/4 trim (rear rotor trim), when in this tuning mode
Fixed bug with max RPM and max Load for closed-loop fuel control
Added min load for closed-loop fuel control
Fixed bug with WOT enrichment
Added special trigger mode for Nissan VQ30 engine
Added AEM UEGO 0-5V on spare input
Added protocol for Innovate TC-4 thermocouple interface device, on second serial port
Added support for Gen 5 Suzuki Swift triggering, with VVT and sequential injection
Improved accuracy of VVT angle detection
Added option for idle-up on each close throttle event (dashpot)
Fixed bug in TPS cutoff for asynch accelerator pump
Modified DC5 trigger mode to handle Yamaha XJR trigger
V1.0N (2008-May-07) – WARI Version V1.11
Traction control added
Launch control added
Changed aux output to correct hysteresis bug on general outputs (introduced in 1.0L) – now only does tighter limits on VVT functions
Modified Subaru 99-00 code to allow cam pulses to overlap crank pulses
Added control over maximum boost and duty cycle for each gear
Added gear learning
Added a maximum control authority for wastegate control
Added variable timeslice for idle control
Added sequential injection for NB MX5
Added ‘Enable datalogging’ digital input type, which forces the gauge data to be sent out through the first serial port (usually for laptop). This allows external dataloggers to read the serial signal
V1.0M (2007-October-16) – WARI Version V1.10
Divide by two with missing teeth trigger added
Aux out 4 inverse of Aux out 3 added for use with certain idle motors etc
Added AND and OR based outputs
Added Engine Make and Model selection
Added stored timing offset
Faster ADC
Faster throttle pump response
VSS code changed for greater accuracy
V1.0L (2007-July-16) – WARI Version V1.09
Reset on camshaft missing tooth added
A do not update already tuned for adaptive tuning modes added
Tacho on Aux output revised
Nissan trigger code optimised for higher rpm
Digital output revision for more tolerant operation (ie hysterisis, non exact values etc)
V1.0J (2007-June-14) – WARI Version V1.08
Added 2j Tech Edge wideband sensor
Added single and two cylinder engine configurations
Added coolant hi and low load enrichment
Improved ignition timing at very low rpm
V1.0I (2007-May-16) – WARI Version V1.07
Added coil addressAdaptronic
Adaptronic Engine Management
adaptronic youtube
adaptronic fb
About Us
FAQ
Support
Forum
Downloads
Articles
Contact Us
My Account ?
What is an ECU?
Choosing an ECU
ECUs
Accessories
Dealers
Wall of Fame
0 items0.00
Adaptronic
General Accessories
Showing 1–10 of 21 results
sair_IMG_0286a
Air Temperature Sensor
44.00 Add to cart
e440l_1_IMG_0270
e420d/440 long loom
89.00 Add to cart
single ignitor
Single Channel Ignitor
50.00 Add to cart
mac3_IMG_0290
3 Port Boost Control Valve
110.00 Add to cart
3 Bar Map Sensor
3 bar Map sensor
88.00 Add to cart
e440s_IMG_0272
e420d/440 short loom
68.00 Add to cart
e420c 2m Loom
e420c Standard long 2m loom
72.00 Add to cart
e440N_IMG_0306
e420d/440 connectors only
41.25 Add to cart
spress150_IMG_0287
150 PSI Pressure Sensor
203.50 Add to cart
GT1011-300x254
GT101 Gear Tooth Sensor
66.00 Add to cart
1
2
3
→
What is an ECU?
Choosing an ECU
ECUs
Accessories
Dealers
Privacy Policy
Terms and Conditions
About Us
FAQ
Support
Forum
Downloads
Contact Us
adaptronic logo
? 2013 Adaptronic.com.au
website security
Adaptronic
Adaptronic Engine Management
adaptronic youtube
adaptronic fb
About Us
FAQ
Support
Forum
Downloads
Articles
Contact Us
My Account ?
What is an ECU?
Choosing an ECU
ECUs
Accessories
Dealers
Wall of Fame
0 items0.00
Adaptronic
Showing 11–20 of 21 results
e420c short loom
e420c Standard short 0.5m loom
48.00 Add to cart
scool10_IMG_0298a1
Coolant Temperature Sensor
44.00 Add to cart
e420cN_IMG_0301
e420c Set of Connectors
20.00 Add to cart
stepper-motor
Stepper motor push-pull driver board
88.00 Add to cart
Boost Gauge
Boost Gauge
22.00 Add to cart
plxint_IMG_0293
PLX Interface Board with ECU Cable
66.00 Add to cart
m001_m003_IMG_0295
1 Bar MAP Sensor
88.00 Add to cart
pb-ecu-sharing-board
Piggy Back ECU Sharing Board
99.00 Add to cart
drive-by-wire
Drive-By-Wire driver board
165.00 Add to cart
Placeholder
Serial CAN Interface with ECU Cable
77.00 Add to cart
←
1
2
3
→
What is an ECU?
Choosing an ECU
ECUs
Accessories
Dealers
Privacy Policy
Terms and Conditions
About Us
FAQ
Support
Forum
Downloads
Contact Us
adaptronic logo
? 2013 Adaptronic.com.au
website security
Adaptronic
Showing 21–21 of 21 results
Placeholder
1UZFE Defeater Board
60.01 Add to cart
Adaptronic
Adaptronic Engine Management
adaptronic youtube
adaptronic fb
About Us
FAQ
Support
Forum
Downloads
Articles
Contact Us
My Account ?
What is an ECU?
Choosing an ECU
ECUs
Accessories
Dealers
Wall of Fame
0 items0.00
Injector Dynamics
Injector Dynamics
Showing 1–10 of 21 results
1000.60.11
ID1000cc, 60mm long, 11mm diameter
169.62 Add to cart
725.60.11
ID725cc, 60mm long, 11mm dia
169.62 Add to cart
1000.60.14
ID1000cc, 60mm long, 14mm diameter
169.62 Add to cart
id850 34mm x 14mm
ID850cc, 34mm long, 14mm dia (Copy)
169.62 Add to cart
ID1300-60-11
ID1300cc, 60mm long, 11mm diameter
318.04 Add to cart
ID1300-60-14
ID1300cc, 60mm long, 14mm diameter
318.04 Add to cart
2000.60.14
ID2000cc, 60mm long, 14mm dia
339.24 Add to cart
2000.48.14
ID2000cc, 48mm long, 14mm diameter
339.24 Add to cart
2000.60-11
ID2000cc, 60mm long, 11mm diameter
339.24 Add to cart
2000.48.11
ID2000cc, 48mm long, 11mm diameter
339.24 Add to cart
1
2
3
→
Which ECU is Right For Me?
FIND OUT MORE!
What is an ECU?
Choosing an ECU
ECUs
Accessories
Dealers
Privacy Policy
Terms and Conditions
About Us
FAQ
Support
Forum
Downloads
Contact Us
adaptronic logo
? 2013 Adaptronic.com.au
website security
Adaptronic
Adaptronic Engine Management
adaptronic youtube
adaptronic fb
About Us
FAQ
Support
Forum
Downloads
Articles
Contact Us
My Account ?
What is an ECU?
Choosing an ECU
ECUs
Accessories
Dealers
Wall of Fame
0 items0.00
Innovate Motorsports
Innovate Motorsports
Showing 1–10 of 57 results
accs-mtxl_all_web
Digital MTX-L Air/Fuel Ratio Gauge Kit (All-in-one) w/O2 Sensor
280.50 Add to cart
inn3877
LC-2: Lambda Cable Complete Kit w/Bosch O2 Sensor
270.63 Add to cart
Placeholder
Extended Bung/Plug Kit (Stainless Steel) 1 inch Tall
14.30 Add to cart
Placeholder
6 Inch Patch Cable 2.5 mm
20.40 Add to cart
Placeholder
Inductive Clamp (LMA-2, LMA-3, DL-32 & LM-2)
48.62 Add to cart
Placeholder
TC-4 (4 Channel Thermocouple K-Type Amplifier)
193.05 Add to cart
Placeholder
SSI-4 (4 Channel Simple Sensor Interface)
193.05 Add to cart
Placeholder
Sensor (Bosch LSU 4.2)
120.12 Add to cart
Placeholder
Bung/Plug Kit (Mild Steel) 1/2 inch
14.30 Add to cart
Placeholder
Sensor Cable: 3 ft. (LM-2, MTX-L)
42.90 Add to cart
1
2
3
4
5
6
→
Which ECU is Right For Me?
FIND OUT MORE!
What is an ECU?
Choosing an ECU
ECUs
Accessories
Dealers
Privacy Policy
Terms and Conditions
About Us
FAQ
Support
Forum
Downloads
Contact Us
adaptronic logo
? 2013 Adaptronic.com.au
website security
Adaptronic
Adaptronic Engine Management
adaptronic youtube
adaptronic fb
About Us
FAQ
Support
Forum
Downloads
Articles
Contact Us
My Account ?
What is an ECU?
Choosing an ECU
ECUs
Accessories
Dealers
Wall of Fame
0 items0.00
Injector Dynamics
Showing 11–20 of 21 results
ID2000-34
ID 2000cc, 34mm long, 14mm diameter
339.24 Add to cart
1000.48.14
ID1000cc, 48mm long, 14mm diameter
169.62 Add to cart
1000.48.11
ID1000cc, 48mm long, 11mm diameter
169.62 Add to cart
850.60.14
ID850cc, 60mm long, 14mm dia
169.62 Add to cart
850.48.14
ID850cc, 48mm long, 14mm dia
169.62 Add to cart
850.60.11
ID850cc, 60mm long, 11mm dia
169.62 Add to cart
850-48-11
ID850cc, 48mm long, 11mm dia
169.62 Add to cart
id850 34mm x 14mm
ID850cc, 34mm long, 14mm dia
169.62 Add to cart
725-60-14
ID725cc, 60mm long, 14mm dia
169.62 Add to cart
725-48-14
ID725cc,48mm long,14mm dia
169.62 Add to cart
←
1
2
3
→
Which ECU is Right For Me?
FIND OUT MORE!
What is an ECU?
Choosing an ECU
ECUs
Accessories
Dealers
Privacy Policy
Terms and Conditions
About Us
FAQ
Support
Forum
Downloads
Contact Us
adaptronic logo
? 2013 Adaptronic.com.au
website security
Adaptronic
Adaptronic Engine Management
adaptronic youtube
adaptronic fb
About Us
FAQ
Support
Forum
Downloads
Articles
Contact Us
My Account ?
What is an ECU?
Choosing an ECU
ECUs
Accessories
Dealers
Wall of Fame
0 items0.00
Innovate Motorsports
Showing 11–20 of 57 results
Placeholder
Extended Bung/Plug Kit (Titanium) 1 inch Tall
50.05 Add to cart
Placeholder
Program Cable: MTX Series
22.88 Add to cart
Placeholder
LM-2 “Basic Kit” Single Channel Wideband
499.07 Add to cart
Placeholder
Carrying Case LM-2
84.37 Add to cart
Placeholder
12mm to 18mm Motorcycle Bung Adapter
58.63 Add to cart
Placeholder
OT-2 Opentune OBD-II/CAN Interface w/LC-1 & O2 Sensor
456.17 Add to cart
Placeholder
OT-2 Opentune OBD-II/CAN Wireless (WiFi) Interface
198.77 Add to cart
Placeholder
Sensor Cable: 18 ft. (LM-2, MTX-L)
118.69 Add to cart
Placeholder
LM-2 Window Mount
78.65 Add to cart
Placeholder
LM-2 USB Cable
11.44 Add to cart
←
1
2
3
4
5
6
→
Which ECU is Right For Me?
FIND OUT MORE!
What is an ECU?
Choosing an ECU
ECUs
Accessories
Dealers
Privacy Policy
Terms and Conditions
About Us
FAQ
Support
Forum
Downloads
Contact Us
adaptronic logo
? 2013 Adaptronic.com.au
website security
Adaptronic
Adaptronic Engine Management
adaptronic youtube
adaptronic fb
About Us
FAQ
Support
Forum
Downloads
Articles
Contact Us
My Account ?
What is an ECU?
Choosing an ECU
ECUs
Accessories
Dealers
Wall of Fame
0 items0.00
Injector Dynamics
Showing 21–21 of 21 results
ID725
ID 725cc, 48mm long, 11mm diameter
169.62 Add to cart
←
1
2
3
Which ECU is Right For Me?
FIND OUT MORE!
What is an ECU?
Choosing an ECU
ECUs
Accessories
Dealers
Privacy Policy
Terms and Conditions
About Us
FAQ
Support
Forum
Downloads
Contact Us
adaptronic logo
? 2013 Adaptronic.com.au
website security
Adaptronic
Adaptronic Engine Management
adaptronic youtube
adaptronic fb
About Us
FAQ
Support
Forum
Downloads
Articles
Contact Us
My Account ?
What is an ECU?
Choosing an ECU
ECUs
Accessories
Dealers
Wall of Fame
0 items0.00
Innovate Motorsports
Showing 21–30 of 57 results
Placeholder
LM-2 Serial Patch Cable
22.88 Add to cart
Placeholder
LM-2 Analog Cable
42.90 Add to cart
Placeholder
Sensor Cable: 8 ft. (LM-2, MTX-L)
72.93 Add to cart
Placeholder
LM-2 OBD-II Cable
42.90 Add to cart
Placeholder
LM-2 Power Cable
28.60 Add to cart
Placeholder
LM-2 Pro-V Dual Channel Wideband W/ OBDll
956.67 Add to cart
Placeholder
LM-2 Single Channel Wideband W/ OBD-ll
684.97 Add to cart
Placeholder
LC-1 Duo Kit (2 LC-1’s + DL-32)
1,086.62 Add to cart
Placeholder
LC-1 Plus Kit (LC-1 + SSI-4)
406.63 Add to cart
Placeholder
1 GB SD Card
31.46 Add to cart
←
1
2
3
4
5
6
→
Which ECU is Right For Me?
FIND OUT MORE!
What is an ECU?
Choosing an ECU
ECUs
Accessories
Dealers
Privacy Policy
Terms and Conditions
About Us
FAQ
Support
Forum
Downloads
Contact Us
adaptronic logo
? 2013 Adaptronic.com.au
website security
Adaptronic
Adaptronic Engine Management
adaptronic youtube
adaptronic fb
About Us
FAQ
Support
Forum
Downloads
Articles
Contact Us
My Account ?
What is an ECU?
Choosing an ECU
ECUs
Accessories
Dealers
Wall of Fame
0 items0.00
Innovate Motorsports
Showing 31–40 of 57 results
Placeholder
DL-32 (32 Channel Vehicle-Mounted Data-Logging System)
678.63 Add to cart
Placeholder
Extended Bung/Plug Kit (Mild Steel) 1 inch Tall (Incl; with all AFR kits)
14.30 Add to cart
Placeholder
4 Ft. Patch Cable M2.5 to M2.5
20.40 Add to cart
Placeholder
Window Mount (LM-1 Only)
121.04 Add to cart
Placeholder
Terminator Plug
12.25 Add to cart
Placeholder
Program Cable: LC-1, XD-1, Aux Box to PC
21.45 Add to cart
Placeholder
LMA-3: AuxBox (Multi-sensor Device)
356.07 Add to cart
Placeholder
Serial Cable (LM-1 Only)
20.40 Add to cart
Placeholder
Power Cable Cigarette Lighter (LM-1 Only)
20.40 Add to cart
Placeholder
Sensor Cable 10 ft. (LM-1 Only)
34.00 Add to cart
←
1
2
3
4
5
6
→
Which ECU is Right For Me?
FIND OUT MORE!
What is an ECU?
Choosing an ECU
ECUs
Accessories
Dealers
Privacy Policy
Terms and Conditions
About Us
FAQ
Support
Forum
Downloads
Contact Us
adaptronic logo
? 2013 Adaptronic.com.au
website security
Adaptronic
Adaptronic Engine Management
adaptronic youtube
adaptronic fb
About Us
FAQ
Support
Forum
Downloads
Articles
Contact Us
My Account ?
What is an ECU?
Choosing an ECU
ECUs
Accessories
Dealers
Wall of Fame
0 items0.00
Innovate Motorsports
Showing 41–50 of 57 results
Placeholder
Bung/Plug Kit (Stainless Steel) 1/2 inch
14.30 Add to cart
Placeholder
USB-to-Serial Adapter
50.05 Add to cart
Placeholder
AC Power Adapter (LM-1 Only) —EOL—
53.04 Add to cart
Placeholder
HBX-1 (Heat-Sink Bung Extender)
127.27 Add to cart
Placeholder
Exhaust Clamp
118.69 Add to cart
Placeholder
Digital MTX-L Air/Fuel Ratio Gauge Kit (POWERSPORTS)
298.87 Add to cart
Placeholder
G5 (G5 Black Face Chrome Bezel Gauge)
148.72 Add to cart
Placeholder
G4 (G4 White Face Chrome Bezel Gauge)
148.72 Add to cart
Placeholder
G5 Kit (G5 Gauge, LC-1 & O2 Sensor)
370.37 Add to cart
Placeholder
G3 (G3 Gauge)
148.72 Add to cart
←
1
2
3
4
5
6
→
Which ECU is Right For Me?
FIND OUT MORE!
What is an ECU?
Choosing an ECU
ECUs
Accessories
Dealers
Privacy Policy
Terms and Conditions
About Us
FAQ
Support
Forum
Downloads
Contact Us
adaptronic logo
? 2013 Adaptronic.com.au
website security
Adaptronic
Adaptronic Engine Management
adaptronic youtube
adaptronic fb
About Us
FAQ
Support
Forum
Downloads
Articles
Contact Us
My Account ?
What is an ECU?
Choosing an ECU
ECUs
Accessories
Dealers
Wall of Fame
0 items0.00
Innovate Motorsports
Showing 51–57 of 57 results
Placeholder
G2 (G2 Gauge)
148.72 Add to cart
Placeholder
G3 Kit (G3 Gauge, LC-1 & O2 Sensor)
370.37 Add to cart
Placeholder
G2 Kit (G2 Gauge, LC-1 & O2 Sensor)
370.37 Add to cart
Placeholder
DB-Red Kit (Red LEDs, LC-1 & O2 Sensor)
313.17 Add to cart
Placeholder
DB-Blue Kit(Blue LEDs,LC-1 & O2 Sensor)
313.17 Add to cart
Placeholder
DB-Gauge Red (Gauge Only)
132.99 Add to cart
Placeholder
DB-Gauge Blue (Gauge Only)
132.99 Add to cart
←
1
2
3
4
5
6
Which ECU is Right For Me?
FIND OUT MORE!
What is an ECU?
Choosing an ECU
ECUs
Accessories
Dealers
Privacy Policy
Terms and Conditions
About Us
FAQ
Support
Forum
Downloads
Contact Us
adaptronic logo
? 2013 Adaptronic.com.au
website security
Adaptronic
Adaptronic Engine Management
adaptronic youtube
adaptronic fb
About Us
FAQ
Support
Forum
Downloads
Articles
Contact Us
My Account ?
What is an ECU?
Choosing an ECU
ECUs
Accessories
Dealers
Wall of Fame
0 items0.00
Zeitronix
Zeitronix
Showing all 5 results
FlexSensorFlowThrough_250
Flex Fuel Sensor
270.64 Add to cart
ECA2
Zeitronix ECA-2 Kit
379.00 Add to cart
Zeitronix Zt-3a
Zeitronix Lambda Sensor
227.50 Add to cart
Zeitronix Black Box
Zeitronix Black Box Logger Plus SD Card
143.00 Add to cart
Zeitronix Zt-3
Zeitronix Lambda Sensor / Gauge
270.64 Add to cart
Which ECU is Right For Me?
FIND OUT MORE!
What is an ECU?
Choosing an ECU
ECUs
Accessories
Dealers
Privacy Policy
Terms and Conditions
About Us
FAQ
Support
Forum
Downloads
Contact Us
adaptronic logo
? 2013 Adaptronic.com.au
website security
Adaptronic
Adaptronic Engine Management
adaptronic youtube
adaptronic fb
About Us
FAQ
Support
Forum
Downloads
Articles
Contact Us
My Account ?
What is an ECU?
Choosing an ECU
ECUs
Accessories
Dealers
Wall of Fame
0 items0.00
Race Technology
Race Technology Accessories
Showing all 5 results
dash2_pro_options_system
Dash 2 PRO Display w GPS / Logging
1,742.30 Add to cart
Dash2
RT Dash 2 Display
1,089.00 Add to cart
dash4pro_oled_lcd
RT Dash 4 Display
868.99 Add to cart
DASH3
RT Dash 3 Display
542.34 Add to cart
dl1_sport
DL1 Sport Data Logger
1,086.77 Add to cart
Which ECU is Right For Me?
FIND OUT MORE!
What is an ECU?
Choosing an ECU
ECUs
Accessories
Dealers
Privacy Policy
Terms and Conditions
About Us
FAQ
Support
Forum
Downloads
Contact Us
adaptronic logo
? 2013 Adaptronic.com.au
website security
ing output option (for RX7 series IV)
Added staged injection (2 and 4 are secondary injectors, modes 0, 1, 7)
Added 4th ignition output on Aux 1
Added FJO serial protocol
Added calmdown effort for idle
Added spark split
Added asynchronous pump cutoff
Load cell for the measurement of static and dynamic loads in COMPRESSION.
Nominal Load from 30t to 500t
Class (OIML R60) C1 and C2
Combined Error: 0,023%
Output: 2mV/V
REQUEST A FREE QUOTATION
Read more...
C2S
Load cell for the measurement of static and dynamic loads in COMPRESSION.
Nominal Load from 100 kg to 200 tons
Class (OIML R60) C1, C2 and C3
Combined Error: 0,023%
Output: 2mV/V
On request
REQUEST A FREE QUOTATION
Read more...
C2S-AMP
Load cell for the measurement of static loads in COMPRESSION.
Nominal Load from 100 kg to 200 tons
linearity andhysteresis 0.03%
REQUEST A FREE QUOTATION
Read more...
CBS
Load cell for the measurement of static and dynamic loads in COMPRESSION.
Nominal Load from 250 kg to 100 tons
Combined Error: 0,03%
Output: 2mV/V
LOW COST version produced for over 30 years.
REQUEST A FREE QUOTATION
Read more...
FT2
SHEAR BEAM load cell for the measurement of static and dynamic loads.
Nominal Load from 500 kg to 10 tons
Class (OIML R60) C2 and C3
Combined Error: 0,019%
Output: 2mV/V
REQUEST A FREE QUOTATION
Read more...
FT1
SHEAR BEAM load cell for the measurement of static and dynamic loads.
Nominal Load from 350 kg to 7,5 tons
Class (OIML R60) C2 and C3
Combined Error: 0,020%
Output: 2mV/V
REQUEST A FREE QUOTATION
Read more...
F3
BENDING BAEM load cell for the measurement of static and dynamic loads.
Nominal Load from 10 kg to 2 tons
Class (OIML R60) C2 and C3
Combined Error: 0,018%
Output: 2mV/V
REQUEST A FREE QUOTATION
Read more...
F1
BENDING BAEM load cell for the measurement of static and dynamic loads.
Nominal Load from 2,5 kg to 200 kg
Class (OIML R60) C2 and C3
Combined Error: 0,020%
Output: 2mV/V
REQUEST A FREE QUOTATION
Read more...
FT6
OFF CENTER load cell for the measurement of static and dynamic loads.
Nominal Load from 5 kg to 100 kg
Class (OIML R60) C2
Combined Error: 0,028%
Output: 2mV/V
REQUEST A FREE QUOTATION
Read more...
TS-AMP
Load cell for the measurement of static and dynamic loads in TENSION and COMPRESSION.
Nominal Load from 10 kg to 10 tons
linearity and hysteresis 0,030%
Standar output M12 connector
REQUEST A FREE QUOTATION
Read more...
TS
Load cell for the measurement of static and dynamic loads in TENSION and COMPRESSION.
Nominal Load from 10 kg to 10 tons
Class (OIML R60) C2, C3 and C4
Combined Error: 0,018%
Output: 2mV/V
REQUEST A FREE QUOTATION
Read more...
CLT
Load cell for the measurement of static and dynamic loads in TENSION and COMPRESSION.
Nominal Load from 100 tons to 250 tons
Linearity: 0,10%
Output: 2mV/V
on request
REQUEST A FREE QUOTATION
Read more...
D200
Load cell for the measurement of static and dynamic loads in TENSION
Nominal Load from 20 tons to 100 tons
Linearity: 0,10%
Output: 2mV/V
on request
REQUEST A FREE QUOTATION
Read more...
T20-AMP
Load cell for the measurement of static loads in TENSION.
Nominal Load from 5 tons to 20 tons
Linearity and Hysteresis 0.03%
Standar output M12 connector
REQUEST A FREE QUOTATION
Read more...
T20
Load cell for the measurement of static and dynamic loads in TENSION.
Nominal Load from 5 tons to 20 tons
Class (OIML R60) C2 and C3
Combined Error: 0,019%
Output: 2mV/V
on request
REQUEST A FREE QUOTATION
Read more...
TCE-AMP
Load cell for the measurement of static loads in COMPRESSION and TENSION.
Nominal Load from 350 tons to 20 tons
Linearity and Hysteresis 0.03%
Standar output M12 connector
REQUEST A FREE QUOTATION
Read more...
TCE
Load cell for the measurement of static and dynamic loads in COMPRESSION and TENSION
Nominal Load from 350 kg to 20 tons
Linearity and Hysteresis 0.03%
Output: 2mV/V
on request
REQUEST A FREE QUOTATION
Read more...
TCA
Load cell for the measurement of static and dynamic loads in COMPRESSION and TENSION
Nominal Load from 1 kg to 50 kg
Linearity and Hysteresis 0.03%
Output: 2mV/VProfessional ergonomic indicator extremely versatile and easy to be used for measurement of FORCE, WEIGHT, PRESSURE (gas), VACUUM, TORQUE and DISPLACEMENT.
It is possible to integrate inside a FORCE sensor from 10 N to 5 kN or a pressure sensor (relative, absolute or differential up to max. 5bar) while from the external input it is possible to connect strain gauges sensors with output in mV/V such as: load cells, force transducers, pressure transducers, torque and displacement transducers.
AUTOMATIC recognition of FORCE, WEIGHT, VACUUM, PRESSURE, TORQUE and DISPLACEMENT external transducers (max. 7)
LCD graph DISPLAY with 3 levels of backlighting to adapt itself to any conditions of external brightness and with the possibility of rotating the visualization of 180°.
DIGITAL CALIBRATIONS protected by Password with full scale programming or with the “LINEARIZATION by points” of transducers, for every transducer it is possible to separay calibrate both the positive and the negative field. (Example: Tension and Compression)
DATALOGGER allows to memorize measurements and to keep them in the internal memory even in case of instrument switching off. (max. 130.000 recordings)
REQUEST A FREE QUOTATION
Read more...
CLF
Force transducers for the measurement of static and dynamic loads in COMPRESSION.
Nominal Load from 300 kN to 5 MN
Class (ISO 376) 1
Linearity and Hysteresis 0,05%
Output: 2mV/V
REQUEST A FREE QUOTATION
Read more...
CLFlex
The transducer consists of a STRAIN CYLINDER and a FORCE transducer used for the calibration and auto alignment of the joints as well as for the force centering of compression test machines on hardened concrete.
Executed according to the norm references: UNI EN 12390-4 and DIN 51302-2.
Nominal Load 3 MN
Class (ISO 376) 1
Linearity and Hysteresis 0,05%
Output: 2mV/V
REQUEST A FREE QUOTATION
Read more...
CLB
Force transducers for the measurement of static and dynamic loads in COMPRESSION and TENSION
Nominal Load from 30 kN to 600 kN
Class (ISO 376) 00, 0.5 and 1
Linearity and Hysteresis 0,03%
Output: 2mV/V
REQUEST A FREE QUOTATION
Read more...
KAL
Force transducers for the measurement of static and dynamic loads in COMPRESSION and TENSION
Nominal Load from 10 kN to 1 MN
Class (ISO 376) 00, 0.5 and 1
Linearity and Hysteresis 0,03%
Output: 2mV/V
REQUEST A FREE QUOTATION
Read more...
microKAL
Force transducers for the measurement of static and dynamic loads in COMPRESSION and TENSION
Nominal Load from 50 N to 5 kN
Class (ISO 376) 00, 0.5 and 1
Linearity and Hysteresis 0,03%
Output: 2mV/V
REQUEST A FREE QUOTATION
Read more...
TCETM
Force transducers for the measurement of static and dynamic loads in COMPRESSION and TENSION
Nominal Load from 5 kN to 100 kN
Class (ISO 376) 00, 0.5 and 1
Linearity and Hysteresis 0,03%
Output: 2mV/V
REQUEST A FREE QUOTATION
Read more...
TSTM
Force transducers for the measurement of static and dynamic loads in COMPRESSION and TENSION
Nominal Load from 500 N to 5 kN
Class (ISO 376) 00, 0.5 and 1
Linearity and Hysteresis 0,025%
Output: 2mV/V
REQUEST A FREE QUOTATION
Read more...
C8S
Force transducers for the measurement of static and dynamic loads in COMPRESSION
Nominal Load from 5 kN to 1 MN
Class (ISO 376) 0.5 and 1
Linearity and Hysteresis 0,03%
Output: 2mV/V
REQUEST A FREE QUOTATION
Read more...
TC4
Force transducers for the measurement of static and dynamic loads in COMPRESSION and TENSION
Nominal Load from 5 kN to 5 MN
Class (ISO 376) 1
Linearity and Hysteresis 0,05%
Output: 2mV/V
on request
REQUEST A FREE QUOTATION
Read more...
DC-TC4
Force transducers for the measurement of static and dynamic loads in COMPRESSION and TENSION
Nominal Load from 10 kN to 1 MN
Linearity and Hysteresis 0.05%
INTEGRATED DIGITAL INDICATOR
Functions ZERO, PEAK, Digital FILTER Programmable.
REQUEST A FREE QUOTATION
Read more...
DCV-TC4
orce transducers for the measurement of static and dynamic loads in COMPRESSION and TENSION
Nominal Load from 10 kN to 1 MN
Linearity and Hysteresis 0.05%
INTEGRATED DIGITAL INDICATOR
ZERO function
REQUEST A FREE QUOTATION
Read more...
TC4-AMP
Force transducers for the measurement of static loads in COMPRESSION and TENSION
Nominal Load from 5 kN to 5 MN
Linearity and Hysteresis 0,05%
Standar output
REQUEST A FREE QUOTATION
Read more...
TC8
Force transducers for the measurement of static and dynamic loads in COMPRESSION and TENSION
Nominal Load from 10 kN to 1 MN
Class (ISO 376) 0.5 and 1
Linearity and Hysteresis 0,03%
Output: 2mV/V
on request
REQUEST A FREE QUOTATION
Read more...
C10
Force transducers for the measurement of static and dynamic loads in COMPRESSION an TENSION
Nominal Load from 10 kN to 1 MN
Linearity and Hysteresis 0,05%
Standard Output
REQUEST A FREE QUOTATION
Read more...
CM
Force transducers with SMALL SIZE for the measurement of static and dynamic loads in COMPRESSION
Nominal Load from 100 kg to 5 tons
Linearity and Hysteresis 0,20%
Standard Output Torque transducers
torsiometri
Designing and production of STATIC and ROTATING torque transducers according to the norms EA 10-1
Ranges from 0.5 N·m up to 5000 N·m
Precision classes from 0.03% up to 0.20%
Analog and Digital Output: 2mV/V, ±10Volt and USB
Versions with reading ANGLE and SPEED integrated..
TRX
STATRIC torque transducers for the measurement in clockwise and anticlockwise direction
FLANGE process coupling
Nominal torque from 50 N?m to 5000 N?m
Class (EURAMER cg-14) 0.05 and 0.1
Linearity and Hysteresis 0,03%
Output: 1mV/V
HIGH ACCURACY
REQUEST A FREE QUOTATION
Read more...
RT2
ROTATING torque transducers for the measurement in clockwise and anticlockwise direction
CYLINDRICAL or SQUARE coupling
Nominal torque from 0.5 N?m to 5000 N?m
Linearity and Hysteresis 0,20%
Nominal speed of rotation 4000 rpm
Contact transmission
RT2 standard outut ±2mV/V
RT2A standard output ±10Volt
REQUEST A FREE QUOTATION
Read more...
RT2-USB
ROTATING torque transducers for the measurement in clockwise and anticlockwise direction
CYLINDRICAL or SQUARE coupling
Nominal torque from 0.5 N?m to 5000 N?m
Linearity and Hysteresis 0,20%
Nominal speed of rotation 4000 rpm
Contact transmission
Versions with integrated reading ANGLE and SPEED
Digital Output
REQUEST A FREE QUOTATION
Read more...
EasyTORK
ROTATING torque transducers for the measurement in clockwise and anticlockwise direction
HEXAGONAL coupling whit quick action chuck
Nominal torque 5 N?m, 10 N?m and 25 N?m
Linearity and Hysteresis 0,20%
Nominal speed of rotation 4000 rpm
Contact transmission
Versions with integrated reading ANGLE and SPEED
Digital Output
Read more...
microTOR
ROTATING torque transducers for the measurement in clockwise and anticlockwise direction
HEXAGONAL coupling whit quick action chuck
Nominal torque 5 N?m, 10 N?m and 25 N?m
Linearity and Hysteresis 0,20%
Nominal speed of rotation 4000 rpm
Contact transmission
Output 2 mV/V
VERY COMPACT SIZE
REQUEST A FREE QUOTATION
Read more...
TRS
STATRIC torque transducers for the measurement in clockwise and anticlockwise direction
SQUARE drive process coupling (UNI ISO 1174-1)
Nominal torque from 0,5 N?m to 1000 N?m
Linearity and Hysteresis 0,2% or 0.1%
Output: 2mV/V
LOW PRICE and EASY APPLICATIONS
REQUEST A FREE QUOTATION
Read more...
BTR
DESKTOP DIGITAL TORQUE forthe measurement in clockwise and anticlockwise direction
For calibrate of torque keys and torque screwdrivers
SQUARE drive process coupling (UNI ISO 1174-1)
Nominal torque from 0,5 N?m to 2000 N?m
Linearity and Hysteresis 0,20%
Output RS232 on request
LOW PRICE and EASY APPLICATIONS
REQUEST A FREE QUOTATION
Read more...
ATC
Manual drive for the calibration of torque KEY wrenches
ATC1000 for torque key whit max. ful scale 1000 N?m
ATC2000 for torque key whit max. ful scale 2000 N?m
REQUEST A FREE QUOTATION
Read more...
DTR
Hand held digital indicator, totally autonomous and with input for strain gauge based torque transducers.
It is ideal to be used in the most modern static and dynamic measurement systems.
With 0,02% accuracy makes it possible to be used use in quality systems as first or second line sample, periodically calibrated by a calibration centre (ACCREDIA in italy).
REQUEST A FREE QUOTATION
Read more...
STAR-T
Professional ergonomic indicator extremely versatile and easy to be used for measurement of FORCE, WEIGHT, PRESSURE (gas), VACUUM, TORQUE and DISPLACEMENT.
It is possible to integrate inside a force sensor (up to max. 5kN) or a pressure sensor (relative, absolute or differential up to max. 5bar) while from the external input it is possible to connect strain gauges sensors with output in mV/V such as: load cells, force transducers, pressure transducers, torque and displacement transducers.
AUTOMATIC recognition of FORCE, WEIGHT, VACUUM, PRESSURE, TORQUE and DISPLACEMENT external transducers (max. 7)
LCD graph DISPLAY with 3 levels of backlighting to adapt itself to any conditions of external brightness and with the possibility of rotating the visualization of 180°.
DIGITAL CALIBRATIONS protected by Password with full scale programming or with the “LINEARIZATION by points” of transducers, for every transducer it is possible to separay calibrate both the positive and the negative field. (Example: Tension and Compression)
DATALOGGER allows to memorize measurements and to keep them in the internal memory even in case of instrument switching off. (max. 130.000 recordings)
Displacement transducers
Designing and production of strain gauge linear DISPLACEMENT transducers.
Nominal displacements from 5mm to 100mm.
Suitable for industrial, laboratory and geotechnical applications.
LDT
Displacement transducers for linear measurement
Nominal displacement from 5 mm to 100 mm
Linearity and Hysteresis 0,10%
LDT standar output 2mV/V
LDTA standard output 0,5 - 5,5Volt
LOW COST and EASY APPLITATIONS
REQUEST A FREE QUOTATION Pressure transducers
trasduttori
Designing and production of straingauge pressure transducers with ranges from 0.1 up to 2500 bar
Version for RELATIVE, ABSOLUTE, VACUUM and DIFFERENTIAL measures.
With amplified or non-amplified output.
Precision classes from 1.0% up to 0.05%.
high reliability.
DF2R
DIFFERENTIAL pressure transducers
Nominal pressures from 100 mbar to 15 bar
AMPLIFIED outputs: ±10Volt
Linearity and hysteresis 0,10%
REQUEST A FREE QUOTATION
Read more...
DF2
DIFFERENTIAL pressure transmitter
Nominal pressures from 0,5 bar to 2000 bar
AMPLIFIED outputs: 4-20mA, 10V or 5Volt
Linearity and hysteresis 0,20%
REQUEST A FREE QUOTATION
Read more...
TPL2C
Pressure transmitters to permanent IMMERSION for level measures
Nominal RELATIVE pressures from 300mbar (3mH2O) to 20bar (200mH2O)
AMPLIFIED output 4-20mA 2 wires
Linearity and Hysteresis 0,10%
REQUEST A FREE QUOTATION
Read more...
TP8
Pressure transducers for RELATIVE, ABSOLUTE and VACUUM measures
Nominal pressures from 5 bar to 1000 bar
Output 2mV/V
Linearity and hysteresis 0,50%
PROTRUDING DIAPHRAGM
HIGH TEMPERATURE max. 150 ° C
REQUEST A FREE QUOTATION
Read more...
TP7DN
Pressure transmitters for RELATIVE, ABSOLUTE and VACUUM measures
Nominal pressures from 1 bar to 50 bar
AMPLIFIED outputs: 4-20mA, 10V or 5Volt
Linearity and hysteresis 0,50%
PROTRUDING DIAPHRAGM
REQUEST A FREE QUOTATION
Read more...
TP15
Pressure transmitters for RELATIVE, ABSOLUTE and VACUUM measures
Nominal pressures from 1 bar to 50 bar
AMPLIFIED outputs: 4-20mA, 10V or 5Volt
Linearity and hysteresis 0,50%
PROTRUDING DIAPHRAGM
REQUEST A FREE QUOTATION
Read more...
TP1
Pressure transducers for RELATIVE and ABSOLUTE measures
Nominal pressures from 10 bar to 700 bar
Linearity and hysteresis 0,20%
TP1 standard output 2mV/V
TP1A amplified ouput 0,5-5,5 Volt
REQUEST A FREE QUOTATION
Read more...
TP16
Pressure transducers for RELATIVE and ABSOLUTE measures
Nominal pressures from 5 bar to 2000 bar
Output 2mV/V
Linearity and hysteresis 0,10%
REQUEST A FREE QUOTATION
Read more...
TP38
Pressure transmitters for RELATIVE, ABSOLUTE and VACUUM measures
Nominal pressures from 100 mbar to 2000 bar
AMPLIFIED outputs: 4-20mA, 10V and 5Volt
Linearity and hysteresis 0,25%, 0.50% or 1%
LOW COST
REQUEST A FREE QUOTATION
Read more...
TP18
Pressure transmitters for RELATIVE and ABSOLUTE measures
Nominal pressures from 5 bar to 2500 bar
AMPLIFIED outputs: 4-20mA, 10V or 5Volt
Linearity and hysteresis 0,20%
HIGH TEMPERATURE max. 150 ° C
REQUEST A FREE QUOTATION
Read more...
TPUSB
Pressure transmitters for RELATIVE, ABSOLUTE and VACUUM measures
Nominal pressures from 100 mbar to 2000 bar
Linearity and hysteresis 0,10% or 0.05%
Digital Output
REQUEST A FREE QUOTATION
Read more...
TP3
Pressure transmitters for RELATIVE, ABSOLUTE and VACUUM measures
Nominal pressures from 100 mbar to 2000 bar
AMPLIFIED outputs: 4-20mA, 10V or 5Volt
Linearity and hysteresis 0,50%
REQUEST A FREE QUOTATION
Read more...
TP12
Pressure transmitters for RELATIVE, ABSOLUTE and VACUUM measures
Nominal pressures from 100 mbar to 2000 bar
AMPLIFIED outputs: 4-20mA, 10V or 5Volt
Linearity and hysteresis 0,20%
REQUEST A FREE QUOTATION
Read more...
TP14
Pressure transmitters for RELATIVE, ABSOLUTE and VACUUM measures
Nominal pressures from 100 mbar to 2000 bar
AMPLIFIED outputs: 4-20mA, 10V or 5Volt
TP14 Linearity and hysteresis 0,10%
LabTP14 Linearity and hysteresis 0,05%
REQUEST A FREE QUOTATION Pressure gauges
Design and production of digital pressure gauges with ranges from 0.1 up to 2500 bar.
Version for RELATIVE, ABSOLUTE, VACUUM and DIFFERENTIAL measures.
Precision classes from 0.5% up to 0.05%.
available with high resolutions
Internal batteries.
High reliability
STAR-P
Professional ergonomic indicator extremely versatile and easy to be used for measurement of FORCE, WEIGHT, PRESSURE (gas), VACUUM, TORQUE and DISPLACEMENT.
Pressure transducers INSIDE
Coupling: 1/8" GAS Female
RELATVE pressures from 100 mbar to 5 bar
ABSOLUTE pressures from 500 mbar to 5 bar (barometric pressure)
DIFFERENTIAL pressures from 100 mbar to 5 bar
OPERATES UNTIL 7 EXTERNAL SENSORS with ABSOLUTE pressures from 5 bar to 2000 bar
Programmable DATA LOGGER
Accuracy: 0,10% and 0,05%
Applications in GAS and AIR (NO liquids)
USB output
REQUEST A FREE QUOTATION
Read more...
JET
Digital pressure gauges for RELATIVE, ABSOLUTE and VACCUM measures
Nominal pressures from 100 mbar to 2000 bar
Linearity and hysteresis 0,20%
Measurement of the temperature of the fluid
High mechanical strength
Suitable for dynamic and static applications
Funzioni: ZERO, FILTRO, PICCO, AUTO SPEGNIMENTO
Programmable DATA LOGGER
Record PRESSURE and TEMPERATURE
USB Outpur WIRELESS version on request
REQUEST A FREE QUOTATION
Read more...
LabDMM
Digital pressure gauges for RELATIVE and VACCUM measures
Nominal pressures from 1 bar to 2000 bar
Linearity and hysteresis 0,05%
High mechanical strength
Suitable for dynamic and static applications
HIGH ACCURACY
REQUEST A FREE QUOTATION
Read more...
IDROSCAN
Digital pressure gauges for RELATIVE and VACCUM measures
Nominal pressures from 1 bar to 2000 bar
Linearity and hysteresis 0,20%
Measurement of the temperature of the fluid
High mechanical strength
Suitable for dynamic and static applications
Programmable DATA LOGGER
Record PRESSURE and TEMPERATURE
REQUEST A FREE QUOTATION
Read more...
Bit02B
Digital pressure gauges for RELATIVE and VACCUM measures
Nominal pressures from 1 bar to 2000 bar
Linearity and hysteresis 0,20%
Measurement of the temperature of the fluid
High mechanical strength
Suitable for dynamic and static applications
LOW COST
REQUEST A FREE QUOTATION
Read more...
Bit02D
Digital pressure gauges for DIFFERENTIAL measures
Nominal pressures from 10 bar to 700 bar
Linearity and hysteresis 0,20%
High mechanical strength
Suitable for dynamic and static applications
System composed of a Bit02B and 2 pressure transducers type TP1
REQUEST A FREE QUOTATION
Read more...
PGE
Digital pressure gauges for RELATIVE and VACCUM measures
Nominal pressures from 1 bar to 2000 bar
Linearity and hysteresis 0,50%
Measurement of the temperature of the fluid
High mechanical strength
Suitable for dynamic and static applications
LOW COST
REQUEST A FREE QUOTATION
Read more...
DFP
Digital pressure gauges for RELATIVE measures
Nominal pressures from 10 bar to 2000 bar
Linearity and hysteresis 0,10%
High mechanical strength
Suitable for dynamic and static applications
Ability to view both the FORCE and the PRESSURE push of a cylinder
REQUEST A FREE QUOTATION
Read more...
DMM
Digital pressure gauges for RELATIVE and VACCUM measures
Nominal pressures from 1 bar to 2000 bar
Linearity and hysteresis 0,15%
High mechanical strength
Suitable for dynamic and static applications
No. 2 SET POINT programmable with output relays output
REQUEST A FREE QUOTATION
Read more...
DMMD
Digital DIFFERENTIAL pressure gauges for RELATIVE measures
Nominal pressures from 1 bar to 2000 bar
Linearity and hysteresis 0,15%
High mechanical strength
Suitable for dynamic and static applications
No. 2 SET POINT programmable with output relays output
REQUEST A FREE QUOTATION
Read more...
DME
Digital pressure gauges for RELATIVE measures
Nominal pressures from 1 bar to 2000 bar
Linearity and hysteresis 0,20%
High mechanical strength
Suitable for dynamic and static applications
No. 2 SET POINT programmable with output relays output
REQUEST A FREE QUOTATION
Read more...
GPM
Manual pressure generator is a system created to solve the problems of calibration and checking of dial manometers, transducers, pressure transmitters and pressure switches with a first line sample carrying ACCREDIA certification.
Max Pressure 700 bar
REQUEST A FREE QUOTATION
Read more...
GPM2000
Manual pressure generator is a system created to solve the problems of calibration and checking of dial manometers, transducers, pressure transmitters and pressure switches with a first line sample carrying ACCREDIA certification.
Max Pressure 2000 bar Dynamometers
Design and production of dynamometers with nominal loads from 100kg to 100 tons.
Accuracy classes 0.05% and 0.20%.
Versions for COMPRESSION and TENSION applications.
Very easy to use.
DFIW
Digital dynamometer with internal batteries realised to control and testin the COMPRESSION force of:
hydraulic electrodes welders
pneumatic presses
test benches
torquing vices
Nominal Losd from 10 kN to 40 kN
Linearity 0.50%
Low-profile strain gauge sensor (18mm) entirely executed in stainless steel, is suitable for high-precision measurements in compression and guarantees a long-term stability even when dynamic applications are involved.
In the sensor supporting surface an insulating area has been introduced in order to make hydraulic welders easier to be checked.
REQUEST A FREE QUOTATION
Read more...
DNA
The DNA has been designed to make easier the measurement and the calibration of forces generated by presses, vices, ropes or chains in industrial environments or directly on site.
The dynamometer consists of a strain gauge load cell with high reliability and precision and of a last generator microprocessor.
For COMPRESSION and TENSION applications
Nominal Loads from 100 kg to 5 tons
Linearity 0.05%
Applications:
Check lifeline fall protection, check safety ropes.
Check chains, check extraction cement plugs.
Check pushing force and pulling carts , check the force generated by press or clamps.
Check closing force of automatic doors and gates.
REQUEST A FREE QUOTATION
Read more...
GR5A
Digital dynamometer belonging consists of a stainless steel strain gauge based load cell, ensuring a high long-term accuracy and reliability, and of a microprocessor based indicator of last generation.
WEIGHT Measures for LIFTING equipment
Nominal Loads from 500kg to 9,5 tons
For TENSION applications
High Accuracy 0.05% F.S.
STRONG and RELIABLE
WIRELESS version on request
REQUEST A FREE QUOTATION
Read more...
Compression Dynamometers
Flexible systems for measures WEIGHT
Nominal loads from 100 kg to 500 tons
FOR COMPRESSION APPLICATIONS
WIRELESS application
REQUEST A FREE QUOTATION
Read more...
Tension Dynamometers
WEIGHT measures for LIFTING equipment
Nominal Losds from 500 kg to 100 tons
For TENSION applications
WIRELESS applications
REQUEST A FREE QUOTATION
WIMOD
Professional WIRELESS transmitter to measure FORCE, WEIGHT, PRESSURE, TORQUE and DISPLACEMENT, to be applied directly on the body of the sensor or in version stan alone.
Through a wireless communication integrated can interface directly in real time to:
PC - TABLET - WISTAR - WIMP2plus - PLC
Extremely versatile and simple to use.
Transmits up to 200m in free area.
REQUEST A FREE QUOTATION
Read more...
STAR
Professional ergonomic indicator extremely versatile and easy to be used for measurement of FORCE, WEIGHT, PRESSURE (gas), VACUUM, TORQUE and DISPLACEMENT.
It is possible to integrate inside a force sensor (up to max. 5kN) or a pressure sensor (relative, absolute or differential up to max. 5bar) while from the external input it is possible to connect strain gauges sensors with output in mV/V such as: load cells, force transducers, pressure transducers, torque and displacement transducers.
AUTOMATIC recognition of FORCE, WEIGHT, VACUUM, PRESSURE, TORQUE and DISPLACEMENT external transducers (max. 7)
LCD graph DISPLAY with 3 levels of backlighting to adapt itself to any conditions of external brightness and with the possibility of rotating the visualization of 180°.
DIGITAL CALIBRATIONS protected by Password with full scale programming or with the “LINEARIZATION by points” of transducers, for every transducer it is possible to separay calibrate both the positive and the negative field. (Example: Tension and Compression)
DATALOGGER allows to memorize measurements and to keep them in the internal memory even in case of instrument switching off. (max. 130.000 recordings)
REQUEST A FREE QUOTATION
Read more...
WISTAR
Professional ergonomic receiver to measure FORCE, WEIGHT, PRESSURE, TORQUE and DISPLACEMENT, extremely versatile and easy to be used.
Through an integrated wireless communication system it is possible to directly interface with 1, 2, 3 or 4 WIMOD modules at the same time in the real time. The transmission frequency at 433 MHz makes the communication safe and reliable even in presence of other transmission systems such as phones, walkie-talkie, radio-microphones, remote-controls etc. which usually work on other frequencies by ensuring a covering of approx. 100 meters in free space.
WiSTAR is equipped with USB interface for communicating in real time with a PC for recharging the long lasting and highly reliable internal battery (Li-Ion). In addition to the direct reading of the measurements it is possible to detect PEAKS and to block the measurement on the display thanks to HOLD function.
LCD graph DISPLAY with 3 levels of backlighting to adapt itself to any conditions of external brightness and with the possibility of rotating the visualization of 180°.
DATALOGGER allows to memorize measurements and to keep them in the internal memory even in case of instrument switching off. (max. 130.000 recordings)
REQUEST A FREE QUOTATION
Read more...
MP1
Panel digital indicator designed to be used in the modern static and dynamic measure systems in industrial activity, it can sample the signal up to a frequency of 300Hz.
Suitable for processing analogue signals coming from strain gauge based load cells and from pressure transmitters with amplified output, it enables to perform measurements with a long-term accuracy of 0.05% of full scale, with a resolution of ±9.999 divisions 2mV/V.
Accuracy 0.05%
LOW COST
REQUEST A FREE QUOTATION
Read more...
MP2E
Panel digital indicator designed to be used in the modern static and dynamic measure systems of industrial field of activity.
Suitable for processing analog signals coming from strain gauge load cells and torque transducers or by pressure and torque transmitters, it allows to perform measurements with a long-term accuracy of 0.01%with a resolution of ±50.000 divisions at 2mV/V. At your inside the instrument works with ±500.000 divisions. All the calibrations (Zero, Full Scale, Analog output, Sensibility, etc.) are digital (no trimmer), therefore they can be performed and repeated without the need of removing the instrument from the panel and without to open it.
Accuracy 0.01%
REQUEST A FREE QUOTATION
Read more...
MP2Plus
"THE EVOLUTION OF THE SPECIES" : after more than 20 years of service in the various versions the new MP2Plus is born.
MP2Plus is a Professional Digital Indicator with 1 (standard) or 2 (option) inputs, suitable for receiving signals from strain gauge sensors, transmitters with voltage or current output and PT100.
Particularly suitable for both static and dynamic applications, for calibration and verification in metrology laboratories or industrial environments where it is necessary to make measurements of weight, force, pressure, torque, displacement and temperature.
To FIT EVERY APPLICATION the instrument can be configured and customized: the function keys F1, F2, F3 and F4 can be programmed for the function of interest such as: PEAK, HOLD, RELEASE, TX DATA DATALOG, DISCHARGE, ZOOM.
The instrument works with a resolution of ±100.000 divisions and an accuracy better than 0.005% due to an internal 24-bit Sigma-Delta AD converter and a measurement control that is carried out for switching at a frequency equal to that of sampling: this system provides a better suppression of interference due to offset drift and to the connecting cables.
The sampling frequency can be set from 2.5 samples per second up to 4800 samples per second therefore the instrument meets the needs of applications that require a considerable speed of response.
REQUEST A FREE QUOTATION
Read more...
WIMP2Plus
WIRELESS Professional Panel Mounting indicator able to handle simultaneous from 1 to 4 transmission devices WIMOD, WISTAR and WIJET.
The transmitters can be equipped with different types of sensors to measure quantities such WEIGHT, FORCE, PRESSURE, TORQUE and DISPLACEMENT.
Particularly suitable for applications in industrial or laboratory where it is necessary to make measurements with multiple sensors at a maximum distance of 100m in free space.
The system makes very simple and fast to change the setup of the entire measuring system without having to change the wiring between the sensor and the instrument.
To FIT EVERY APPLICATION the instrument can be configured and customized: the function keys F1, F2, F3 and F4 can be programmed for the function of interest such as: PEAK, HOLD, RELEASE, TX DATA DATALOG, DISCHARGE, ZOOM.
For each channel, it is possible to customize the frequency of reading which can be set from 1 sample per second up to 10 sample per second and then being able to meet the needs of applications that require a higher speed of response.
REQUEST A FREE QUOTATION
Read more...
MP4Plus
"THE EVOLUTION OF THE SPECIES" : after more than 20 years of service in the various versions the new MP4Plus is born.
MP4Plus is a Professional Digital Indicator with 4 inputs, suitable for receiving signals from strain gauge sensors, transmitters with voltage or current output and PT100.
Particularly suitable for both static and dynamic applications, for calibration and verification in metrology laboratories or industrial environments where it is necessary to make measurements of weight, force, pressure, torque, displacement and temperature.
To FIT EVERY APPLICATION the instrument can be configured and customized: the function keys F1, F2, F3 and F4 can be programmed for the function of interest such as: PEAK, HOLD, RELEASE, TX DATA DATALOG, DISCHARGE, ZOOM.
MP4Plus allows you to enable and disable each channel and using the ZOOM function it s possible to display only the channel of interest in full screen.
The instrument works with a resolution of ±100.000 divisions and an accuracy better than 0.005% due to an internal 24-bit Sigma-Delta AD converter and a measurement control that is carried out for switching at a frequency equal to that of sampling: this system provides a better suppression of interference due to offset drift and to the connecting cables.
REQUEST A FREE QUOTATION
Read more...
MP10Plus
Laboratory digital indicator is a programmable instrument for the treatment of signals from strain gauge full bridge transducers, that allows the measurement of forces, mass, pressure, torque moments and displacements.
It has been designed to be used in the most modern systems of static and dynamic measurement of high precision, such as metrology laboratories, materials testing machines, test benches or test etc. ...
It is ideal to be used as first-line standard, if periodically certified by calibration laboratories or equivalent centers (ACCREDIA in Italy).
MP10 has an accuracy of 0.0010% or 0.0020%, 24-bit internal resolution and combines a resolution (with signal ± 2 mV/V) of ± 2.000.000 divisions in the K2 version (± 200.000 divisions in the standard version).
DATA LOGGER inside
HIGH ACCURACY
REQUEST A FREE QUOTATION
Read more...
MP6Plus
"THE EVOLUTION OF THE SPECIES" : after more than 20 years of service in the various versions the new MP6Plus is born.
MP6Plus is a Professional Digital Laboratory Indicator with 1, 2, 3, or 4 inputs, suitable for receiving signals from strain gauge sensors, transmitters with voltage or current output and PT100. Particularly suitable for both static and dynamic applications, for calibration and verification in metrology laboratories or industrial environments where it is necessary to make measurements of weight, force, pressure, torque, displacement and temperature in a synchronized manner.
To FIT EVERY APPLICATION the instrument can be configured and customized: the function keys F1, F2, F3 and F4 can be programmed for the function of interest such as: PEAK, HOLD, RELEASE, TX DATA DATALOG, DISCHARGE, ZOOM.
MP6Plus allows you to enable and disable each channel and using the ZOOM function it s possible to display only the channel of interest in full screen.
The instrument works with a resolution of ±100.000 divisions and an accuracy better than 0.005% due to an internal 24-bit Sigma-Delta AD converter and a measurement control that is carried out for switching at a frequency equal to that of sampling: this system provides a better suppression of interference due to offset drift and to the connecting cables.
REQUEST A FREE QUOTATION
Read more...
PC2M
Signal calibrator has been realised to perform periodical checks and calibrations on indicators with a 2mV/V input and a 4 or 6 wires systems.
Provided with a main switch with 6 selectable steps, it allows to control the linearity on both positive and negative field.
Internally, the 350Ω full bridge unbalancing, is generated by high stability passive resistances (1 ppm/°C) that enable the calibrator to work with a stable accuracy better than 0.0025% of full scale and with repeatability of 5 ppm.
In order to work with more ease, a system that keeps the ZERO signal constant by working on both positive and negative field without performing different zero settings on the indicator has been introduced.
Complete with calibration report.
REQUEST A FREE QUOTATION
Read more...
DFI
Hand held digital indicator, totally autonomous and with input for strain gauge based dynamometers (force) and load cells (weight).
It is ideal to be used in the most modern static and dynamic measurement systems as materials testing-machines, printing presses, test benches and generally in the automation industrial sector.
With 0,02% accuracy makes it possible to be used use in quality systems as first or second line sample, periodically calibrated by a calibration centre (ACCREDIA in italy).
REQUEST A FREE QUOTATION
Read more...
DFX
Hand held digital indicator, totally autonomous and with input for strain gauge based dynamometers (force) and load cells (weight).
It is ideal to be used in the most modern static and dynamic measurement systems as materials testing-machines, printing presses, test benches and generally in the automation industrial sector.
Accuracy ±0,04%
LOW COST
REQUEST A FREE QUOTATION
Read more...
TA4/2
Transmitters make easy and cheap the remote transmission of strain gauge load cells analogue signals to PLC, PC, recorders, remote indicators etc… until to a distance of 40 miters.
The possibility of internally connecting the load cells in parallel (max. 4 of 350Ω or 8 of 700Ω) makes system wiring easier by avoiding the use of junction boxes. It is ideal to be used in the most advanced industrial weighing systems, processes control, dosing (silos and hoppers) and automation thanks to the two versions of its case: hermetic case made of pressure die-cast aluminium (IP65 class) or plastic case for mounting on a DIN guide (suitable for applications inside control panels)
REQUEST A FREE QUOTATION
Read more...
TA5F
The transmitter makes simple and cheap the remote transmission of the value sampled from strain gauges load cells, torque transducers, etc.. to PLC, PC, recorders, etc…
The possibility of internally performing the parallel of the load cells simplifies the system wiring because it does not require the use of any junction box. TA5F is available in two versions: with an hermetic case made of die-cast aluminium (IP65 protection class) or in a plastic case for the mounting on a DIN bar (suitable for control panels).
The transmitter has a maxim resolution of ±200.000 divisions, it is ideal for directly connecting the point/site of the measurement to a remote control station, the high conversion speed (up to 300Hz) makes it suitable also for application in real-time.
The transmitter is internally controlled by a microcontroller in Flash technology which first processes the data coming from the ratiometric AD converter and then manages the serial communication.
The transmitter can work as Slave (it transmits the value only on request) or as Master (it transmits the value continuously).
Outputi: RS232C and RS485 Modbus
REQUEST A FREE QUOTATION
Read more...
TDA
The digital transmitter TDA is an instrument designed for the processing of signals from strain gauges in full bridge configuration with 4 or 6 wires and is able to interface with most of the main common field buses such as Modbus RTU, CANopen, DeviceNet and Profibus. For the fieldbus CANopen, Devicenet and Profibus the electronic is galvanically isolated.
Besides the selected fieldbus, it has a RS232 serial interface with a communication program already SUPPLIED (WinTDA), allows a fast tool to control the effectiveness of the performance of the transmitter and allows to implement the calibration procedures.
Outputi: RS232C - RS485 ModBus - CanOpen - DeviceNet - ProfiBus
REQUEST A FREE QUOTATION
Read more...
TAUSB
The transmitter makes simple and economical the transmission of data coming from a transducer to a PC.
TAUSB has a maximum resolution of 20.000 divisions and transmits the data directly on-line USB 2.0.
It is a very simple but complete instrument as it is self powered directly from the USB line and is ideal for use in a laboratory as a generic acquisition system leaving to the software on PCs the characterization of the parameters to which the transducer is connected.
The transmitter is controlled by a microcontroller that processes the data sampled by a high resolution AD converter at a frequency up to 3000Hz and manages the USB communication.
The transmitter continuously transmits the value in divisions according to a protocol highly optimized and easy to implement.
Accuracy: 0,025%
LOW COST
REQUEST A FREE QUOTATION
Read more...
TA2USB
The transmitter makes simple and economical the transmission of data coming from up to 2 load cells, transducers or potentiometers to a PC.
TA2USB has a maximum resolution of ±50.000 divisions and transmits the data directly on-line USB 2.0.
It is a very simple but complete instrument as it is self powered directly from the USB line and is ideal as acquisition system connected to a PC.
The transmitter is controlled by a microcontroller that processes the data sampled by two 24bit ADC converters (one for each channels) at a frequency from 5 to 4800Hz.
The instrument continuously transmits the value in divisions according to a protocol highly optimized and easy to implement and allows to get in real-time all the internal acquisition data.
Accuracy 0,010%
REQUEST A FREE QUOTATION
Read more...
SG4
Junction box is used to make weighing, dosing and plants controlling easier, whenever connecting load cells in parallel is necessary, in order to have a single output signal which represents the sum of the signals of connected load cells.
Also available ATEX version
Software applications
Design and development of application software for:
Systems analysis.
Control industrial applications.
Weighing systems.
Monitor record progress over time of physical quantities.
Calibration instrumentation for sizes FORCE, PRESSURE and TORQUE.
All softwares can be modified by AEP in order to comply with the needs of each customer.
QUICK ANALYZER
Software for monitoring analyzing and recording the run of tests which can involve up to 16 sensors at the same time.
Is possible to have the LIGHT version where is possible to connect only one instrument / sensor.
REQUEST A FREE QUOTATION
Read more...
ForceKAL
The Software is designed to perform the calibration of material testing equipment, machines force samples, test benches or other equipment using standard devices.
Evaluation of the uncertainty of calibration is performed according to the requirements of the UNI CEI ENV 13005 and the information given in Appendix D of ISO / DIS 7500-1.
REQUEST A FREE QUOTATION
Read more...
PresKAL
The Software is designed to facilitate calibration and metrological confirmation of gauges that measure in both positive and vacuum in accordance with International Standard EN ISO 9001Mounting pad for ISO Namur valves
Artikel-Nr.: e9.130
more
I-box, switch type: Cherry D44X
Artikel-Nr.: e9.420
more
3/2 way solenoid valve G 1/4"-Namur
Artikel-Nr.: e9.240M
more
5/2 way solenoid valve G 1/4"-Namur
Artikel-Nr.: e9.250M
more
Limit switch box, switch type: P+F
Artikel-Nr.: e9.402
more
Limit switch box, switch type: P+F(2-wire), certification: ATEX
Artikel-Nr.: e9.404
more
Limit switch box, switch type: IFM (3-wire)
Artikel-Nr.: e9.406
more
Limit switch box, switch type: IFM (3-wire)
Artikel-Nr.: e9.408
more
Limit switch box, switch type: Cherry D44X
Artikel-Nr.: e9.410
more
3/2 way solenoid valve G 1/8", brand Joyner
Artikel-Nr.: e9.240
more
5/2 way solenoid valve G 1/4"-Namur
Artikel-Nr.: e9.250
more
5/2 way solenoid valve G 1/4"-Namur, EEx-protected construction, with 10m cable
Artikel-Nr.: e9.255
5/2-way solenoid valve, brand Festo
Artikel-Nr.: e9.280
more
Silencer
Artikel-Nr.: e9.470
more
Silencer with exhaust throttle
Artikel-Nr.: e9.472
more
Fine throttle
Artikel-Nr.: e9.473
more
Mecanical limit switch 3SE32001C
Artikel-Nr.: e9.370.
more
Inductive proximity switch NBN3-F25-E8-V1 with puk
Artikel-Nr.: e9.380
more
Inductive proximity switch BTS-DSU35
Artikel-Nr.: e9.384
more
Inductive proximity switch IFM
Artikel-Nr.: e9.390
more
Inductive proximity switch BI4U-M12-AP6X-H1141
Artikel-Nr.: e9.382
more
Round limit switch box for direct mounting on manual valve
Artikel-Nr.: e9.393
more
Position indicator
Artikel-Nr.: e9.658
more
Mounting pad for ISO valves
Artikel-Nr.: e9.100
Pneumatic actuator double acting
Artikel-Nr.: eDAxx
more
Two stage pneumatic actuator
Artikel-Nr.: eDDxx
more
Pneumatic actuator double acting
Artikel-Nr.: eDTxx
more
Pneumatic actuator single acting spring return
Artikel-Nr.: eSTxx
more
Pneumatic actuator double acting
Artikel-Nr.: eDx
more
Pneumatic actuator single acting spring return
Artikel-Nr.: eFRxx
more
Pneumatic actuator single acting, spring return
Artikel-Nr.: eSRxx
more
Electric Actuator 230V 50 Hz
Artikel-Nr.: eAE-230V AC
more
Electric Actuator 24V AC/DC
Artikel-Nr.: eAE-24V DC
more
Electric Actuator 230V AC
Artikel-Nr.: eEKxxP-230V AC
more
Electric Actuator 24V AC/DC
Artikel-Nr.: eEKxxP-24V AC/DC
more
Electric Actuator 100-240V AC
Artikel-Nr.: eERxxP-100-240V AC
Electric Actuator 24V AC/DC
Artikel-Nr.: eERxxP-24V AC/DC
more
Electric Actuator 400 V TRI
Artikel-Nr.: eVR-400 V TRI
more
Electric Actuator 100-240 V AC
Artikel-Nr.: eVR-100-240 V AC
more
Electric Actuator 24V AC/DC
Artikel-Nr.: eVR-24V AC/DC
more
Electric Actuator 400 V TRI
Artikel-Nr.: eVRX-400 V TRI
more
Electric Actuator 100-240 V AC
Artikel-Nr.: eVRX-100-240 V AC
Ball valve
Artikel-Nr.: e2.101FG
more
Ball valve
Artikel-Nr.: e2.102FG
more
Ball valve
Artikel-Nr.: e2.103FG
more
Ball valve DVGW-certification for gas
Artikel-Nr.: e2.104FG
more
Ball valve DVGW-certification for gas
Artikel-Nr.: e2.105FG
more
Ball valve DVGW-certification for gas
Artikel-Nr.: e2.107
more
Ball valve DVGW-certification for gas
Artikel-Nr.: e2.107FG
more
Ball valve DVGW-certification for gas
Artikel-Nr.: e2.118
more
Ball valve DVGW-certification for gas
Artikel-Nr.: e2.118FG
more
Ball valve
Artikel-Nr.: e2.140R
more
Ball valve, hand lever lockable
Artikel-Nr.: e2.140VS
more
Ball valve
Artikel-Nr.: e2.142R
Ball valve, hand lever lockable
Artikel-Nr.: e2.142VS
more
Ball valve
Artikel-Nr.: e2.144R
more
Ball valve
Artikel-Nr.: e2.144VS
more
Ball valve DVGW-certification for gas
Artikel-Nr.: e2.281
more
Ball valve DVGW-certification for gas
Artikel-Nr.: e2.286
more
Ball valve DVGW-certification for gas
Artikel-Nr.: e2.287
more
ISO-Therm-Ball valve with thermometer-handle
Artikel-Nr.: e2.646
more
ISO-Therm-Ball valve T-handle
Artikel-Nr.: e2.648
more
Ball valve, DVGW-certification for drinking water acc. DIN EN13828
Artikel-Nr.: e2.750
more
Ball valve, DVGW-certification for drinking water acc. DIN EN13828
Artikel-Nr.: e2.753
more
Ball valve with screwcap, DVGW-certification for drinking water DIN EN13828
Artikel-Nr.: e2.755
more
Ball valve, long thread
Artikel-Nr.: e2.756
Ball valve, long thread
Artikel-Nr.: e2.756R
more
Ball valve, long thread
Artikel-Nr.: e2.757
more
Ball valve, long thread
Artikel-Nr.: e2.766
more
Ball valve
Artikel-Nr.: e8.102
more
Ball valve
Artikel-Nr.: e8.104
more
Ball valve
Artikel-Nr.: e8.9350
more
Ball valve
Artikel-Nr.: e8.9360
more
Ball valve
Artikel-Nr.: e8.9361
more
Ball valve
Artikel-Nr.: e8.9370
more
Ball valve
Artikel-Nr.: e8.9371
more
Ball valve, DVGW-certification for drinking water acc. DIN EN13828
Artikel-Nr.: e8.9380
more
Ball valve, DVGW-certification for drinking water acc. DIN EN13828
Artikel-Nr.: e8.9381
Flange-Ball valve, pneumatically operated, double acting
Artikel-Nr.: eDW-4.170
more
Flange-Ball valve, pneumatically operated, single acting federrueckslend
Artikel-Nr.: eFR-4.170
more
Flange-Ball valve electrically operated 230 V AC
Artikel-Nr.: eAE-4.170-230 V AC
more
Flange-Ball valve electrically operated 24 V DC
Artikel-Nr.: eAE-4.170-24 V DC
more
Ball valve electrically operated, DIN DVGW, 230 V AC
Artikel-Nr.: eSRF230AS25-2.852
more
Ball valve electrically operated, DIN DVGW, 24 V AC
Artikel-Nr.: eSRF24AS25-2.852
more
Flange ball valve electrically operated 24 V DC
Artikel-Nr.: eAE-2.500-24 V DC
more
Compact-flange ball valve electrically operated 24 V DC
Artikel-Nr.: eAE-7.410-24 V DC
more
3-way-ball valve T-bore
Artikel-Nr.: e2.300
more
3-way-ball valve L-bore
Artikel-Nr.: e2.305
more
3-way-ball valve T-bore
Artikel-Nr.: e2.310
more
3-way-ball valve L-bore
Artikel-Nr.: e2.315
3-way-ball valve L-bore only for bypass
Artikel-Nr.: e2.325
more
3-way-ball valve T-bore, ISO 5211 flange
Artikel-Nr.: e2.330
more
3-way-ball valve L-bore, ISO 5211 flange
Artikel-Nr.: e2.335
more
3-way-ball valve T-bore, ISO 5211 flange
Artikel-Nr.: e2.340
more
3-way-ball valve T-bore
Artikel-Nr.: e2.343
more
3-way-ball valve L-bore, ISO 5211 flange
Artikel-Nr.: e2.345
more
3-way-ball valve L-bore
Artikel-Nr.: e2.348
more
3-way-ball valve, T-bore
Artikel-Nr.: e8.300
more
3-way-ball valve, T-bore, ISO 5211 flange
Artikel-Nr.: e8.303
more
3-way-ball valve, L-bore
Artikel-Nr.: e8.305
more
3-way-ball valve, L-bore, ISO 5211 flange
Artikel-Nr.: e8.308
more
3-way-ball valve, T-bore
Artikel-Nr.: e8.310
3-way-ball valve, T-bore, ISO 5211 flange
Artikel-Nr.: e8.313
more
3-way-ball valve, L-bore
Artikel-Nr.: e8.315
more
3-way-ball valve, L-bore, ISO 5211 flange
Artikel-Nr.: e8.318
more
3-way-ball valve, T-bore, ISO 5211 flange
Artikel-Nr.: e8.320
more
3-way-ball valve, T-bore, ISO 5211 flange, weld end
Artikel-Nr.: e8.322
more
3-way flange-ball valve, T-bore, ISO 5211 flange
Artikel-Nr.: e8.324
more
3-way-ball valve, L-bore, ISO 5211 flange
Artikel-Nr.: e8.325
more
3-way ball valve, L-bore, ISO 5211 flange weld end
Artikel-Nr.: e8.327
more
3-way flange-ball valve, L-bore, ISO 5211 flange
Artikel-Nr.: e8.329
more
3-way-ball valve, T-bore, flange
Artikel-Nr.: e8.340
more
3-way-ball valve, T-bore, flange
Artikel-Nr.: e8.343
more
3-way-ball valve, L-bore, flange
Artikel-Nr.: e8.345
3-way-ball valve, L-bore, flange
Artikel-Nr.: e8.348
more
3-way-ball valve, T-bore, thread DIN 11851
Artikel-Nr.: e8.380
more
3-way-ball valve, T-bore, thread DIN 11851
Artikel-Nr.: e8.383
more
3-way-ball valve, L-bore, thread DIN 11851
Artikel-Nr.: e8.385
more
3-way-ball valve, L-bore, thread DIN 11851
Artikel-Nr.: e8.388
more
3-way-ball valve, T-bore, thread Tri-Clamp
Artikel-Nr.: e8.390
more
3-way-ball valve, T-bore, thread Tri-Clamp
Artikel-Nr.: e8.393
more
3-way-ball valve, L-bore, thread Tri-Clamp
Artikel-Nr.: e8.395
more
3-way-ball valve, L-bore, thread Tri-Clamp
Artikel-Nr.: e8.398
more
3-way ball valve electrically operated, T-bore thread
Artikel-Nr.: eAE-2.330-230 V AC
more
3-way ball valve electrically operated, L-bore thread
Artikel-Nr.: eAE-2.335-230 V AC
more
3-way-ball valve Stainless steel electrically operated, T-bore thread
Artikel-Nr.: eAE-8.303-230 V AC
more
Bl?ttern ... 4 | 5 | 6 | 7 | 8
Artikel pro Seite 12 | 24 | 36 | 48
Topseller
3-way-ball valve, L-bore, thread Tri-Clamp
3-way-ball valve, L-bore, t...
Ball valve, 3-pieces, electrically operated thread
Ball valve, 3-pieces, elect...
3 way-High pressure-ball valve
3 way-High pressure-ball valve
3-way-ball valve, L-bore, thread Tri-Clamp
3-way-ball valve, L-bore, t...
Stainless steel-ball valve 3-pieces
Stainless steel-ball valve ...
3-way-ball valve Stainless steel electrically operated, L-bore thread
Artikel-Nr.: eAE-8.308-230 V AC
more
3-way ball valve electrically operated, T-bore thread
Artikel-Nr.: eAE-2.330-24 V DC
more
3-way ball valve electrically operated, L-bore thread
Artikel-Nr.: eAE-2.335-24 V DC
more
3-way-ball valve Stainless steel electrically operated, T-bore thread
Artikel-Nr.: eAE-8.303-24 V DC
more
3-way-ball valve Stainless steel electrically operated, L-bore thread
Artikel-Nr.: eAE-8.308-24 V DC
more
3-way ball valve electrically operated, T-bore thread
Artikel-Nr.: eAE-8.320-230 V AC
more
3-way ball valve electrically operated, T-bore weld end
Artikel-Nr.: eAE-8.322-230 V AC
more
3-way ball valve electrically operated, T-bore flange
Artikel-Nr.: eAE-8.324-230 V AC
more
3-way ball valve electrically operated, L-bore thread
Artikel-Nr.: eAE-8.325-230 V AC
more
3-way ball valve electrically operated, L-bore weld end
Artikel-Nr.: eAE-8.327-230 V AC
more
3-way ball valve electrically operated, L-bore flange
Artikel-Nr.: eAE-8.329-230 V AC
more
3-way ball valve electrically operated, T-bore thread
Artikel-Nr.: eAE-8.320-24 V DC
Wafer-Butterfly valve, pneumatically operated, double acting Art.no.: DW36-5.010.040 Actuator: DW36
Artikel-Nr.: eDW36-5.010.040
more
Wafer-Butterfly valve, sleeve PTFE
Artikel-Nr.: e5.400
more
Wafer-Butterfly valve, pneumatically operated, single acting Art.no.: FR20-5.020.050 Actuator: FR26
Artikel-Nr.: eFR26-5.020.050
more
Wafer-Butterfly valve, pneumatically operated, single acting Art.no.: FR20-5.020.065 Actuator: FR26
Artikel-Nr.: eFR26-5.020.065
more
Wafer-Butterfly valve, pneumatically operated, single acting Art.no.: FR36-5.020.080 Actuator: FR52
Artikel-Nr.: eFR52-5.020.080
more
Wafer-Butterfly valve, pneumatically operated, single acting Art.no.: FR70-5.020.100 Actuator: FR81
Artikel-Nr.: eFR81-5.020.100
more
Wafer-Butterfly valve, pneumatically operated, single acting Art.no.: FR110-5.020.125 Actuator: FR11
Artikel-Nr.: eFR119-5.020.125
more
Wafer-Butterfly valve, pneumatically operated, single acting Art.no.: FR110-5.020.150 Actuator: FR11
Artikel-Nr.: eFR119-5.020.150
more
Wafer-Butterfly valve, pneumatically operated, single acting Art.no.: FR160-5.020.200 Actuator: FR24
Artikel-Nr.: eFR248-5.020.200
more
Wafer-Butterfly valve, pneumatically operated, single acting Art.no.: FR333-5.020.250 Actuator: FR50
Artikel-Nr.: eFR500-5.020.250
more
Wafer-Butterfly valve, pneumatically operated, single acting Art.no.: FR323-5.020.300 Actuator: FR50
Artikel-Nr.: eFR500-5.020.300
more
Wafer-Butterfly valve, sleeve EPDM
Artikel-Nr.: e5.010
Wafer-Butterfly valve , sleeve NBR
Artikel-Nr.: e5.020
more
Wafer-Butterfly valve , sleeve FKM
Artikel-Nr.: e5.030
more
LUG-Butterfly valve , sleeve EPDM
Artikel-Nr.: e5.050
more
LUG-Butterfly valve , sleeve NBR
Artikel-Nr.: e5.060
more
LUG-Butterfly valve , sleeve FKM
Artikel-Nr.: e5.070
more
Wafer-Butterfly valve , sleeve EPDM
Artikel-Nr.: e5.100
more
Wafer-Butterfly valve , sleeve NBR
Artikel-Nr.: e5.110
more
Wafer-Butterfly valve , sleeve FKM
Artikel-Nr.: e5.120
more
LUG-Butterfly valve , sleeve EPDM
Artikel-Nr.: e5.200
more
LUG-Butterfly valve , sleeve NBR
Artikel-Nr.: e5.210
more
LUG-Butterfly valve , sleeve FKM
Artikel-Nr.: e5.220
more
Wafer-Butterfly valve, sleeve EPDM, electrically operated
Artikel-Nr.: eAE-5.010-230 V AC
Wafer-Butterfly valve, sleeve NBR, electrically operated
Artikel-Nr.: eAE-5.020-230 V AC
more
Wafer-Butterfly valve, sleeve FKM, electrically operated
Artikel-Nr.: eAE-5.030-230 V AC
more
Lug-Butterfly valve, sleeve EPDM, electrically operated
Artikel-Nr.: eAE-5.050-230 V AC
more
Lug-Butterfly valve, sleeve NBR, electrically operated
Artikel-Nr.: eAE-5.060-230 V AC
more
Lug-Butterfly valve, sleeve FKM, electrically operated
Artikel-Nr.: eAE-5.070-230 V AC
more
Wafer-Butterfly valve, sleeve EPDM, electrically operated
Artikel-Nr.: eAE-5.100-230 V AC
more
Wafer-Butterfly valve, sleeve NBR, electrically operated
Artikel-Nr.: eAE-5.110-230 V AC
more
Wafer-Butterfly valve, sleeve FKM, electrically operated
Artikel-Nr.: eAE-5.120-230 V AC
more
Lug-Butterfly valve, sleeve EPDM, electrically operated
Artikel-Nr.: eAE-5.200-230 V AC
more
Lug-Butterfly valve, sleeve NBR, electrically operated
Artikel-Nr.: eAE-5.210-230 V AC
more
Lug-Butterfly valve, sleeve FKM, electrically operated
Artikel-Nr.: eAE-5.220-230 V AC
more
Wafer-Butterfly valve, sleeve FKM, electrically operated
Artikel-Nr.: eAE-5.010-24 V DC
Wafer-Butterfly valve, sleeve NBR, electrically operated
Artikel-Nr.: eAE-5.020-24 V DC
more
Wafer-Butterfly valve, sleeve FKM, electrically operated
Artikel-Nr.: eAE-5.030-24 V DC
more
Lug-Butterfly valve, sleeve EPDM, electrically operated
Artikel-Nr.: eAE-5.050-24 V DC
more
Lug-Butterfly valve, sleeve NBR, electrically operated
Artikel-Nr.: eAE-5.060-24 V DC
more
Lug-Butterfly valve, sleeve FKM, electrically operated
Artikel-Nr.: eAE-5.070-24 V DC
more
Wafer-Butterfly valve, sleeve EPDM, electrically operated
Artikel-Nr.: eAE-5.100-24 V DC
more
Wafer-Butterfly valve, sleeve NBR, electrically operated
Artikel-Nr.: eAE-5.110-24 V DC
more
Wafer-Butterfly valve, sleeve FKM, electrically operated
Artikel-Nr.: eAE-5.120-24 V DC
more
Lug-Butterfly valve , sleeve EPDM, electrically operated
Artikel-Nr.: eAE-5.200-24 V DC
more
Lug-Butterfly valve, sleeve NBR, electrically operated
Artikel-Nr.: eAE-5.210-24 V DC
more
Lug-Butterfly valve, sleeve FKM, electrically operated
Artikel-Nr.: eAE-5.220-24 V DC
more
Wafer-Butterfly valve, sleeve EPDM, pneumatically operated, double acting
Artikel-Nr.: eDW-5.010
Wafer-Butterfly valve, sleeve NBR, pneumatically operated, double acting
Artikel-Nr.: eDW-5.020
more
Wafer-Butterfly valve, sleeve FKM, pneumatically operated, double acting
Artikel-Nr.: eDW-5.030
more
LUG-Butterfly valve, sleeve EPDM, pneumatically operated, double acting
Artikel-Nr.: eDW-5.050
more
LUG-Butterfly valve, sleeve NBR, pneumatically operated, double acting
Artikel-Nr.: eDW-5.060
more
LUG-Butterfly valve, sleeve FKM, pneumatically operated, double acting
Artikel-Nr.: eDW-5.070
more
Wafer-Butterfly valve, sleeve EPDM, pneumatically operated, double acting
Artikel-Nr.: eDW-5.100
more
Wafer-Butterfly valve , sleeve NBR, pneumatically operated, double acting
Artikel-Nr.: eDW-5.110
more
Wafer-Butterfly valve, sleeve FKM, pneumatically operated, double acting
Artikel-Nr.: eDW-5.120
more
LUG-Butterfly valve, sleeve EPDM, pneumatically operated, double acting
Artikel-Nr.: eDW-5.200
more
LUG-Butterfly valve, sleeve NBR, pneumatically operated, double acting
Artikel-Nr.: eDW-5.210
more
LUG-Butterfly valve, sleeve FKM, pneumatically operated, double acting
Artikel-Nr.: eDW-5.220
more
Wafer-Butterfly valve, sleeve EPDM, pneumatically operated, single acting
Artikel-Nr.: eFR-5.010
Wafer-Butterfly valve, sleeve NBR, pneumatically operated, single acting
Artikel-Nr.: eFR-5.020
more
Wafer-Butterfly valve, sleeve FKM, pneumatically operated, single acting
Artikel-Nr.: eFR-5.030
more
LUG-Butterfly valve, sleeve EPDM, pneumatically operated, single acting
Artikel-Nr.: eFR-5.050
more
LUG-Butterfly valve, sleeve NBR, pneumatically operated, single acting
Artikel-Nr.: eFR-5.060
more
LUG-Butterfly valve, sleeve FKM, pneumatically operated, single acting
Artikel-Nr.: eFR-5.070
more
Wafer-Butterfly valve, sleeve EPDM, pneumatically operated, single acting
Artikel-Nr.: eFR-5.100
more
Wafer-Butterfly valve, sleeve NBR, pneumatically operated, single acting
Artikel-Nr.: eFR-5.110
more
Wafer-Butterfly valve, sleeve FKM, pneumatically operated, single acting
Artikel-Nr.: eFR-5.120
more
LUG-Butterfly valve, sleeve EPDM, pneumatically operated, single acting
Artikel-Nr.: eFR-5.200
more
LUG-Butterfly valve, sleeve NBR, pneumatically operated, single acting
Artikel-Nr.: eFR-5.210
more
LUG-Butterfly valve, sleeve FKM, pneumatically operated, single acting
Artikel-Nr.: eFR-5.220
Knife gate valve with handweel, PTFE sealing
Artikel-Nr.: e8.890
more
Knife gate valve, pneumatically operated, double acting, PTFE sealing
Artikel-Nr.: eDW-8.890
more
Knife gate valve with handweel, PTFE sealing
Artikel-Nr.: e4.890
more
Knife gate valve, pneumatically operated, double acting, PTFE sealing
Artikel-Nr.: eDW-4.890
more
Knife gate valve with handweel, metal sealing
Artikel-Nr.: e4.810
more
Knife gate valve with handweel, NBR sealing
Artikel-Nr.: e4.820
more
Knife gate valve with handweel, EPDM sealing
Artikel-Nr.: e4.830
more
Knife gate valve with handweel, FKM sealing
Artikel-Nr.: e4.840
more
Knife gate valve, pneumatically operated, double acting, metal sealing
Artikel-Nr.: eDW-4.810
more
Knife gate valve, pneumatically operated, double acting, NBR sealing
Artikel-Nr.: eDW-4.820
more
Knife gate valve, pneumatically operated, double acting, EPDM sealing
Artikel-Nr.: eDW-4.830
more
Knife gate valve, pneumatically operated, double acting, FKM sealing
Artikel-Nr.: eDW-4.840
Knife gate valve with handweel, metal sealing
Artikel-Nr.: e8.810
more
Knife gate valve with handweel, NBR sealing
Artikel-Nr.: e8.820
more
Knife gate valve with handweel, EPDM sealing
Artikel-Nr.: e8.830
more
Knife gate valve with handweel, FKM sealing
Artikel-Nr.: e8.840
more
Knife gate valve, pneumatically operated, double acting, metal sealing
Artikel-Nr.: eDW-8.810
more
Knife gate valve, pneumatically operated, double acting, NBR sealing
Artikel-Nr.: eDW-8.820
more
Knife gate valve, pneumatically operated, double acting, EPDM sealing
Artikel-Nr.: eDW-8.830
more
Knife gate valve, pneumatically operated, double acting, FKM sealing
Artikel-Nr.: eDW-8.840
Lock valve, pneumatically operated, double acting, sealing NBR
Artikel-Nr.: e2.650
more
Lock valve, pneumatically operated, single acting, spring return normal open, sealing NBR
Artikel-Nr.: e2.660
more
Lock valve, pneumatically operated, single acting, spring return normal closed, sealing NBR
Artikel-Nr.: e2.670
more
Lock valve, pneumatically operated, double acting, sealing FKM
Artikel-Nr.: e2.680
more
Lock valve, pneumatically operated, single acting, spring return normal open, sealing FKM
Artikel-Nr.: e2.683
more
Lock valve, pneumatically operated, single acting, spring return normal closed, sealing FKM
Artikel-Nr.: e2.686
more
Lock valve, pneumatically operated, double acting, sealing EPDM
Artikel-Nr.: e2.690
more
Lock valve, pneumatically operated, single acting, spring return normal open, sealing EPDM
Artikel-Nr.: e2.693
more
Lock valve, pneumatically operated, single acting, spring return normal closed, sealing EPDM
Artikel-Nr.: e2.696
Pneumatic angle seat valve, spring return normal close against flow direction
Artikel-Nr.: e8.693
more
Pneumatic angle seat valve, spring return normal open against flow direction
Artikel-Nr.: e8.696
more
Pneumatic angle seat valve, spring return normal close with flow direction
Artikel-Nr.: e8.690
Double-flap check valve, blade GGG40
Artikel-Nr.: e4.661
more
Double-flap check valve, blade stainless steel
Artikel-Nr.: e4.667
more
Swing-check valve, flap steel, without spring, sealing EPDM
Artikel-Nr.: e7.9000
more
Swing-check valve, flap steel, without spring, sealing FPM
Artikel-Nr.: e7.9010
more
Swing-check valve, flap steel, without spring, sealing PTFE
Artikel-Nr.: e7.9020
more
Swing-check valve, flap steel, without spring, sealing NBR
Artikel-Nr.: e7.9030
more
Swing-check valve, flap steel, without spring, sealing metal
Artikel-Nr.: e7.9040
more
Swing-check valve, flap stainless steel, without spring, sealing EPDM
Artikel-Nr.: e7.9008
more
Swing-check valve, flap stainless steel, without spring, sealing FPM
Artikel-Nr.: e7.9018
more
Swing-check valve, flap stainless steel, without spring, sealing PTFE
Artikel-Nr.: e7.9028
more
Swing-check valve, flap stainless steel, without spring, sealing NBR
Artikel-Nr.: e7.9038
more
Swing-check valve, flap stainless steel, without spring, sealing metal
Artikel-Nr.: e7.9048
Swing-check valve, flap steel, with spring, sealing EPDM
Artikel-Nr.: e7.9100
more
Swing-check valve, flap steel, with spring, sealing FPM
Artikel-Nr.: e7.9110
more
Swing-check valve, flap steel, with spring, sealing PTFE
Artikel-Nr.: e7.9120
more
Swing-check valve, flap steel, with spring, sealing NBR
Artikel-Nr.: e7.9130
more
Swing-check valve, flap steel, with spring, sealing metal
Artikel-Nr.: e7.9140
more
Swing-check valve, flap stainless steel, with spring, sealing EPDM
Artikel-Nr.: e7.9108
more
Swing-check valve, flap stainless steel, with spring, sealing FPM
Artikel-Nr.: e7.9118
more
Swing-check valve, flap stainless steel, with spring, sealing PTFE
Artikel-Nr.: e7.9128
more
Swing-check valve, flap stainless steel, with spring, sealing NBR
Artikel-Nr.: e7.9138
more
Swing-check valve, flap stainless steel, with spring, sealing metal
Artikel-Nr.: e7.9148
more
Double-flap check valve, blade stainless steel
Artikel-Nr.: e8.661
more
Swing-check valve, flap stainless steel, without spring, sealing EPDM
Artikel-Nr.: e8.9000
Swing-check valve, flap stainless steel, without spring, sealing FPM
Artikel-Nr.: e8.9010
more
Swing-check valve, flap stainless steel, without spring, sealing PTFE
Artikel-Nr.: e8.9020
more
Swing-check valve, flap stainless steel, without spring, sealing NBR
Artikel-Nr.: e8.9030
more
Swing-check valve, flap stainless steel, without spring, sealing metal
Artikel-Nr.: e8.9040
more
Swing-check valve, flap stainless steel, with spring, sealing EPDM
Artikel-Nr.: e8.9100
more
Swing-check valve, flap stainless steel, with spring, sealing FPM
Artikel-Nr.: e8.9110
more
Swing-check valve, flap stainless steel, with spring, sealing PTFE
Artikel-Nr.: e8.9120
more
Swing-check valve, flap stainless steel, with spring, sealing NBR
Artikel-Nr.: e8.9130
more
Swing-check valve, flap stainless steel, with spring, sealing metal
Artikel-Nr.: e8.9140
more
Gate valve
Artikel-Nr.: e2.601
more
Swing-check valve
Artikel-Nr.: e2.607
more
Angle seat non-return valve
Artikel-Nr.: e2.608
Angle seat non-return valve
Artikel-Nr.: e2.609
more
Y-strainer, strainer o 0,5 mm
Artikel-Nr.: e2.610
more
Non-return valve, full metal
Artikel-Nr.: e2.620
more
Non-return valve Sytem Valstop
Artikel-Nr.: e2.625
more
Gate valve
Artikel-Nr.: e3.601
more
Globe valve
Artikel-Nr.: e3.603
more
Angle seat valve
Artikel-Nr.: e3.604
more
Swing-check valve
Artikel-Nr.: e3.606
more
Swing-check valve
Artikel-Nr.: e3.607
more
Y-strainer, strainer o 0,5 mm
Artikel-Nr.: e3.610
more
Gate valve
Artikel-Nr.: e4.601
more
Sewage-Swing-check valve
Artikel-Nr.: e4.606
Non-return valve DIN 3356
Artikel-Nr.: e4.608
more
Flanged y-stainer
Artikel-Nr.: e4.610
more
Gate valve
Artikel-Nr.: e4.650
more
Gate valve
Artikel-Nr.: e4.670
more
Globe valve
Artikel-Nr.: e4.730
more
Globe valve
Artikel-Nr.: e4.740
more
Gate valve
Artikel-Nr.: e8.601
more
Globe valve
Artikel-Nr.: e8.604
more
Angle seat valve
Artikel-Nr.: e8.605
more
Swing-check valve
Artikel-Nr.: e8.607
more
Sleeve-check valve
Artikel-Nr.: e8.608
more
Y-strainer
Artikel-Nr.: e8.610
Non-return valve System
Artikel-Nr.: e8.615
more
Flanged y-stainer
Artikel-Nr.: e8.616
more
Non-return valve
Artikel-Nr.: e8.620
more
Non-return valve
Artikel-Nr.: e8.622
8.730.015 DN 15 PDF anzeigenRequest
8.730.020 DN 20 PDF anzeigenRequest
8.730.025 DN 25 PDF anzeigenRequest
8.730.032 DN 32 PDF anzeigenRequest
8.730.040 DN 40 PDF anzeigenRequest
8.730.050 DN 50 PDF anzeigenRequest
8.730.065 DN 65 PDF anzeigenRequest
8.730.080 DN 80 PDF anzeigenRequest
8.730.100 DN 100 PDF anzeigenRequest
8.730.125 DN 125 PDF anzeigenRequest
8.730.150 DN 150 PDF anzeigenRequest
Schlumpberger Internetagentur Werbeagentur
(C) 2009 - 2011 Aeromatic
Aeromatic liefert ARMATUREN, KUGELH?HNE, KLAPPEN, REGELVENTILE, ABSPERRKLAPPEN, STOFFSCHIEBER, PNEUMATISCHE DREHANTRIEBE, ELEKTRISCHE SLANTRIEBE, PNEUMATISCHES SCHR?GSITZVENTIL, ARMATUREN PNEUMATISCH ANGETRIEBEN, ARMATUREN ELEKTRISCH ANGETRIEBEN, KUGELHAHN P 8.696.015 DN15 PDF anzeigenRequest
8.696.020 DN20 PDF anzeigenRequest
8.696.025 DN25 PDF anzeigenRequest
8.696.026 DN25 PDF anzeigenRequest
8.696.032 DN32 PDF anzeigenRequest
8.696.040 DN40 PDF anzeigenRequest
8.696.050 DN50
more
Non-return valve
Artikel-Nr.: e8.624
more
Non-return valve
Artikel-Nr.: e8.626
more
Non-return valve
Artikel-Nr.: e8.628
more
Globe valve
Artikel-Nr.: e8.730 .
The calibration procedure and calculations are made in accordance with the requirements of the "Guide for the calibration of pressure gauges" EA-10/17.
REQUEST A FREE QUOTATION
Read more...
TorqueKAL
The Software was designed to perform the calibration of torque tools comparing them to reference tools.
The calibration procedure is performed in accordance with the UNI EN ISO 6789.
Evaluation of the uncertainty of calibration is performed according to the requirements of the UNI CEI ENV 13005th.
REQUEST A FREE QUOTATION
Read more...
DEMO1
Software for the connection of the instrument to a PC complete with DATA LOGGER and transfer of the measured values to an EXCEL file.
Real time graphical representation of the test.
Connectable instruments:DFI, DFIW, DTR, BTR, DFP, LabDMM and Bit02
REQUEST A FREE QUOTATION
Read more...
DEMO2
Software for the connection of the instrument to a PC complete with DATA LOGGER and transfer of the measured values to an EXCEL file.
Real time graphical representation of the test
Connectable instruments: MP10, MP6A, MP2E, MP2000, TA5F and DMM
REQUEST A FREE QUOTATION
Read more...
相關產品
