參考價: | 面議 |
- N4000A 產品型號
- 品牌
- 經銷商 廠商性質
- 東莞市 所在地
訪問次數:243更新時間:2017-03-11 14:39:29
非常榮幸您能看到這條信息,不管您是想賣儀器 還是買儀器 還是租儀器,都?xì)g迎您隨時跟我們 本工廠*以來從事二手儀器行業,大量回收,銷售,出租各種進口品牌型號儀器儀表。 如果您是有閑置儀器、庫存儀器、工廠倒閉儀器需要處理,給我們一個,我會給您一個公道的價格!
收購N4000A,*回收N4000A
Agilent N4000A回收,Agilent N4000A回收/大量收購
Agilent N4000A回收,Agilent N4000A回收/大量收購
東莞市捷鑫儀器有限公司
: 陳R
:
:742002535
電子:sally000
地址:東莞市塘廈鎮清塘北街16號
**/高價回收進口電子儀器:手機綜合測試儀Agilent HP,藍牙測試儀,網絡分析儀Agilent HP,頻譜分析儀Agilent/HP,信號源Agilent HP信號發生器,示波器,功率計Agilent,頻率計Agilent/HP,LCR電橋Agilent HP,電源,數據采集儀Agilent/HP,噪聲系數分析儀Agilent/HP,多用表校準儀FLUKE,萬用表Agilent /HP,天饋線測試儀Anritsu/安立,溫度記錄儀,色彩分析儀,光波測量系統Agilent HP ,阻抗測試治具及附件,衰減器Agilent/HP,Agilent/HP E5515C板等儀器,歡迎您的!
主要特性與技術指標
Main characteristics and technical indexes
用電子方式存儲超噪比(ENR)校準數據,可以降低出現人為錯誤的機率
Electronic storage of ultra noise ratio (ENR) calibration data, you can reduce the probability of occurrence of human error
ENR 數據自動下載到 NFA,可加快整體設置速度
ENR data is automatically downloaded to the NFA, can accelerate the overall set up speed
溫度補償可提高測量精度,使器件性能具有更嚴格的技術指標
Temperature compensation can improve the measurement accuracy, so that the performance of the device has a more stringent technical indicators
3.5 毫米連接器作為標準配置提供,N 型連接器作為選件 001 提供
3.5 mm connector as standard, N type connectors as option 001 provides
如欲了解完整信息,請參考產品概述
For complete information, please refer to the product overview
如欲了解該產品的詳細技術指標,請查看操作服務指南
To understand the detailed technical specifications of the product, please see the operating service guide.
描述
describe
SNS 系列 N4000A 是一款 10 MHz 至 18 GHz 噪聲源,額定 ENR 為 6 dB。N4000A 噪聲源專為精確測量低噪聲系數器件,或增益對信號源阻抗的微小變化非常敏感的器件而設計。利用該器件可精確可靠地測量噪聲系數高達 20 dB 的被測件。N4000A 噪聲源可選用多種連接器,標準配置是 APC 3.5 毫米(陽頭)連接器。
SNS series N4000A is a 10 GHz to 18 MHz noise source, rated at ENR 6 dB. N4000A noise source is designed for the accurate measurement of low noise coefficient devices, or the gain of small changes in the signal source impedance is very sensitive to the device design. By using this device, the measured part can be used to measure the noise figure up to 20 dB. N4000A noise source can choose a variety of connectors, standard configuration is APC 3.5 mm (positive) connector.
收購N4000A,*回收N4000A