精品乱码一区内射人妻无码-亚洲中文AⅤ中文字幕在线-免费不卡国产福利在线观看-国产综合无码一区二区色蜜蜜

意大利GIVI MISURE    MOD. 1   Vertical fixing    配件
意大利GIVI MISURE    MOD. 2   Vertical fixing with single hinged arm    配件
意大利GIVI MISURE    MOD. 3   Wall fixing with single hinged arm    配件
意大利GIVI MISURE    MOD. 4   Surface fixing with single hinged arm    配件
意大利GIVI MISURE    MOD. 5   Wall fixing with double hinged arm    配件
意大利GIVI MISURE    MOD. 6   Surface fixing with double hinged arm    配件
意大利GIVI MISURE    MOD. 7   Surface fixing    配件
意大利GIVI MISURE    MOD. ARGO   Vertical fixing on round bar ? 25 mm    配件

SCR W1   Resolution 1 μm    
Resolution    1 μm
Grating pitch    40 μm
Accuracy grade    ± 3 μm
Max. traversing speed    25 m/min
Reference indexes    in required positions
Output signals    NPN / LINE DRIVER / PUSH-PULL
Protection class    IP 54 standard     IP 64 pressurized

SCR W05   Resolution 0.5 μm    
Resolution    0.5 μm
Grating pitch    20 μm
Accuracy grade    ± 3 μm
Max. traversing speed    12 m/min
Reference indexes    in required positions
Output signals    NPN / LINE DRIVER / PUSH-PULL
Protection class    IP 54 standard     IP 64 pressurized

PBS-HR 100Z   Resolution 10 μm - Zero Magneto Set    
Resolution    10 μm
Grating pitch    40 μm
Accuracy grade    ± 2.5 μm
Max. traversing speed    80 m/min
Measuring length    170, 220, 270, 320, … mm
Reference indexes    in required positions
Output signals    LINE DRIVER / PUSH-PULL
Protection class    IP 54 standard     IP 64 pressurized

PBS-HR T5   Resolution 5 μm - Zero Magneto Set    
Resolution    5 μm
Grating pitch    20 μm
Accuracy grade    ± 2.5 μm
Max. traversing speed    60 m/min
Measuring length    170, 220, 270, 320, … mm
Reference indexes    constant step / selectable / coded
Output signals    LINE DRIVER / PUSH-PULL
Protection class    IP 54 standard     IP 64 pressurized

PBS-HR 5Z   Resolution 5 μm - Zero Magneto Set    
Resolution    5 μm
Grating pitch    20 μm
Accuracy grade    ± 2.5 μm
Max. traversing speed    60 m/min
Measuring length    170, 220, 270, 320, … mm
Reference indexes    in required positions
Output signals    LINE DRIVER / PUSH-PULL
Protection class    IP 54 standard     IP 64 pressurized

意大利GIVI MISURE    MOD. 1   Vertical fixing    配件泵 
L
WA6;7
95 dB
92
P
S
3.0
2.0
1.0
2.5
0.6
4.0
0.8
kW
1.5
ηesd (Nmax)
30
50
53 %
58
60
40
58
20
Direct driven centrifugal fans / RZA / Technical Data
Density of media 1.15 kg/m3.
Tolerance class 2 according to DIN 24166.
Measured in installation A according to ISO 5901 (unducted).
Technical Data
Determination of the Octave level
Inlet side
Discharge side Relative sound power level LWrel6 at octave band correction factors fc.
Relative sound power level LWrel7 at octave band correction factors fc.
Duty point
Duty point
Normal operation area
17意大利GIVI MISURE    MOD. 1   Vertical fixing    配件泵 
RZA 11-0400
RZA 11- V Hz kW kW A Hz 1/min °C kg
0400-4D 3 400 87 4.40 5.6 12 80 2330 40 68
RZA 11- V Hz kW A Hz 1/min 1/min °C kg
0400-4D-50 * 400 50 1.46 3.50 80 1480 2330 40 68
0400-4D-60 * 460 60 2.41 4.20 80 1770 2330 40 68
667
40
302 369
751
385
320
40
40
445
773
310 179
130
596
14 546
567
541
504
4 x 100
334
10
507
30
304
ZKF 15-2222 ZKE 15-2222 ZSG 01-0400
LG 0 LG 90 LG 180 LG 270 RD 0 RD 90 RD 180 RD 270
RZA 11- ESH 22- MM420 3AC 400V 6SE6400- ZBD 01-
0400-4D ESH 22-075-32 MM420 3AC 400V 5.50KW EMV B 6SE6400-3CC02-2CD3 ZBD 01-0606-A
RZA 11- ESH 22- MM420 3AC 400V 6SE6400- ZBD 01-
0400-4D-50 ESH 22-075-32 – – ZBD 01-0606-A
0400-4D-60 ESH 22-075-32 – – ZBD 01-0606-A
Direct driven centrifugal fans / RZA / Technical Data
Technical Data
Technical Data意大利GIVI MISURE    MOD. 1   Vertical fixing    配件泵 
Frequency Inverter Parameters
The following curves show the fans operating with frequency control:
The nominal frequency of the inverter is 87 Hz, i.e. the input frequency
400 V is increased to 87 Hz. The performance curves plot speed/frequency against volume and pressure, and the total efficiency
(ηinverter × ηmotor × ηimpeller) is expressed as a parabola.
The set up parameters for each inverter are provided in the accompanying literature.
Calculations formula
P
S = psF × qV / ηsS
L
Wokt7 = LWA6/7 + LWrel7
L
Wokt6 = LWA6/7 + LWrel6
3 = Stepless speed controllable via frequency converter
* = No speed control available
Dimensions in mm, Subject to change.
Accessories
Speed
control
Nominal
voltage
Nominal frequency
Nominal motor
power
Max. power
consumption
Max. output
current (FC)
Max. operating
frequency Max. fan speed
Max. media
temperature Weight
Speed
control
Nominal
voltage
Mains
frequency
Max. power
consumption
Nominal
motor
current
Max. operating
frequency
Nominal motor
speed Max. fan speed
Max. media
temperature Weight
Isolator
(metal casing)
Frequency Inverter Unit MM420
for 3~
Line Choke
for 3~ Anti Vibration Rubber Buffers
18
RZA 11-0450
63 125 250 500 1000 2000 4000 8000 Hz
≤ 1.4 qVopt -2 1 2 0 -7 -12 -16 -22 dB
> 1.4 qVopt -4 -2 1 0 -7 -10 -16 -24 dB
63 125 250 500 1000 2000 4000 8000 Hz
≤ 1.4 qVopt -3 -5 -3 -1 -6 -16 -19 -27 dB
> 1.4 qVopt -9 -8 -3 -1 -5 -14 -19 -29 dB
2000
1000
600
400
200
100
40
Pa
500
300
800
60
50
80
1500
150
1200
120
3000 4000 m3/h
psF
5000 6000 8000
2040
1800
1600
1400
1200
1100
N
1/min 70
62
55
48
41
f
Hz
qV
38
m3/s
qV
0.7 0.8 0.9 1.0 1.5 2.0
10000 12000
3.0
1000 35
15000
4.0
20000
6.0
ηesd (Nmax)
30
50
54 % 59
61
40
58
20
82
85
88
73
79
76
L
WA6;7
94 dB
91
P
S
3.0
2.0
1.0
4.0 5.0
0.8
kW
1.5
Direct driven centrifugal fans / RZA / Technical Data
Density of media 1.15 kg/m3.
Tolerance class 2 according to DIN 24166.
Measured in installation A according to ISO 5901 (unducted).
Technical Data
Determination of the Octave level
Inlet side
Discharge side Relative sound power level LWrel6 at octave band correction factors fc.
Relative sound power level LWrel7 at octave band correction factors fc.
Duty point
Duty point
Normal operation area
19
RZA 11-0450
RZA 11- V Hz kW kW A Hz 1/min °C kg
0450-4D 3 400 87 5.20 6.6 15.8 70 2040 40 85
RZA 11- V Hz kW A Hz 1/min 1/min °C kg
0450-4D-50 * 400 50 2.47 5.70 70 1480 2040 40 85
0450-4D-60 * 460 60 4.15 6.80 70 1770 2040 40 85
750
44
342 413
842
385
320
44
44
499
868
346 202
130
660
14 612
639
605
566
4 x 112
400
12
569
35
341
340
ZKF 15-2424 ZKE 15-2424 ZSG 01-0450
LG 0 LG 90 LG 180 LG 270 RD 0 RD 90 RD 180 RD 270
RZA 11- ESH 22- MM420 3AC 400V 6SE6400- ZBD 01-
0450-4D ESH 22-075-32 MM420 3AC 400V 7.50KW EMV B 6SE6400-3CC02-2CD3 ZBD 01-1010-A
RZA 11- ESH 22- MM420 3AC 400V 6SE6400- ZBD 01-
0450-4D-50 ESH 22-075-32 – – ZBD 01-1010-A
0450-4D-60 ESH 22-075-32 – – ZBD 01-1010-A
Direct driven centrifugal fans / RZA / Technical Data
Technical Data
Technical Data
Frequency Inverter Parameters
The following curves show the fans operating with frequency control:
The nominal frequency of the inverter is 87 Hz, i.e. the input frequency
400 V is increased to 87 Hz. The performance curves plot speed/frequency against volume and pressure, and the total efficiency
(ηinverter × ηmotor × ηimpeller) is expressed as a parabola.
The set up parameters for each inverter are provided in the accompanying literature.
Calculations formula
P
S = psF × qV / ηsS
L
Wokt7 = LWA6/7 + LWrel7
L
Wokt6 = LWA6/7 + LWrel6
3 = Stepless speed controllable via frequency converter
* = No speed control available
Dimensions in mm, Subject to change.
Accessories
Speed
control
Nominal
voltage
Nominal frequency
Nominal motor
power
Max. power
consumption
Max. output
current (FC)
Max. operating
frequency Max. fan speed
Max. media
temperature Weight
Speed
control
Nominal
voltage
Mains
frequency
Max. power
consumption
Nominal
motor
current
Max. operating
frequency
Nominal motor
speed Max. fan speed
Max. media
temperature Weight
Isolator
(metal casing)
Frequency Inverter Unit MM420
for 3~
Line Choke
for 3~ Anti Vibration Rubber Buffers
20
RZA 11-0500
63 125 250 500 1000 2000 4000 8000 Hz
≤ 1.4 qVopt -2 1 2 0 -7 -12 -16 -22 dB
> 1.4 qVopt -4 -2 1 0 -7 -10 -16 -24 dB
63 125 250 500 1000 2000 4000 8000 Hz
≤ 1.4 qVopt -3 -5 -3 -1 -6 -16 -19 -27 dB
> 1.4 qVopt -9 -8 -3 -1 -5 -14 -19 -29 dB
2000
1000
600
400
200
100
40
Pa
500
300
800
60
50
80
1500
150
1200
120
3000 4000 m3/h
psF
5000 6000 8000
1770
1600
1400
1300
1200
1000
N
1/min 90
81
71
66
61
f
Hz
qV
51
m3/s
qV
0.9 1.0 1.5 2.0
10000 12000
3.0
900 45
15000
4.0
20000
5.0 6.0 7.0
1100 56
81
84
87
72
78
75
L
WA6;7
93 dB
90
ηesd (Nmax)
30
50
53 % 59
61
40
58
20
P
S
3.0
2.0
1.0
4.0
5.0
kW
1.5
Direct driven centrifugal fans / RZA / Technical Data
Density of media 1.15 kg/m3.
Tolerance class 2 according to DIN 24166.
Measured in installation A according to ISO 5901 (unducted).
Technical Data
Determination of the Octave level
Inlet side
Discharge side Relative sound power level LWrel6 at octave band correction factors fc.
Relative sound power level LWrel7 at octave band correction factors fc.
Duty point
Duty point
Normal operation area
21
RZA 11-0500
RZA 11- V Hz kW kW A Hz 1/min °C kg
0500-6D 3 400 87 5.90 7.3 15.9 90 1770 40 103
RZA 11- V Hz kW A Hz 1/min 1/min °C kg
0500-6D * 400 50 1.39 5.70 90 990 1770 40 103
0500-6D-60 * 460 60 2.34 5.80 90 1180 1770 40 103
821
52
370 457
929
385
320
52
52
553
956
381 221
130
729
14 680
708
674
635
5 x 112
400
12
638
35
376
ZKF 15-2525 ZKE 15-2525 ZSG 01-0500
LG 0 LG 90 LG 180 LG 270 RD 0 RD 90 RD 180 RD 270
RZA 11- ESH 22- MM420 3AC 400V 6SE6400- ZBD 01-
0500-6D ESH 22-075-32 MM420 3AC 400V 7.50KW EMV B 6SE6400-3CC02-2CD3 ZBD 01-1010-A
RZA 11- ESH 22- MM420 3AC 400V 6SE6400- ZBD 01-
0500-6D-50 ESH 22-075-32 – – ZBD 01-1010-A
0500-6D-60 ESH 22-075-32 – – ZBD 01-1010-A
Direct driven centrifugal fans / RZA / Technical Data
Technical Data
Technical Data
Frequency Inverter Parameters
The following curves show the fans operating with frequency control:
The nominal frequency of the inverter is 87 Hz, i.e. the input frequency
400 V is increased to 87 Hz. The performance curves plot speed/frequency against volume and pressure, and the total efficiency
(ηinverter × ηmotor × ηimpeller) is expressed as a parabola.
The set up parameters for each inverter are provided in the accompanying literature.
Calculations formula
P
S = psF × qV / ηsS
L
Wokt7 = LWA6/7 + LWrel7
L
Wokt6 = LWA6/7 + LWrel6
3 = Stepless speed controllable via frequency converter
* = No speed control available
Dimensions in mm, Subject to change.
Accessories
Speed
control
Nominal
voltage
Nominal frequency
Nominal motor
power
Max. power
consumption
Max. output
current (FC)
Max. operating
frequency Max. fan speed
Max. media
temperature Weight
Speed
control
Nominal
voltage
Mains
frequency
Max. power
consumption
Nominal
motor
current
Max. operating
frequency
Nominal motor
speed Max. fan speed
Max. media
temperature Weight
Isolator
(metal casing)
Frequency Inverter Unit MM420
for 3~
Line Choke
for 3~ Anti Vibration Rubber Buffers
22
RZA 11-0560
63 125 250 500 1000 2000 4000 8000 Hz
≤ 1.4 qVopt -2 1 2 0 -7 -12 -16 -22 dB
> 1.4 qVopt -4 -2 1 0 -7 -10 -16 -24 dB
63 125 250 500 1000 2000 4000 8000 Hz
≤ 1.4 qVopt -17 0 1 -1 -6 -16 -19 -27 dB
> 1.4 qVopt -9 -3 1 -1 -5 -14 -19 -29 dB
2000
1000
600
400
200
100
40
Pa
500
300
800
60
50
80
1500
150
1200
120
4000 m3/h
psF
5000 6000 8000
1660
1500
1300
1200
1100
900
N
1/min 87
79
68
63
58
f
Hz
qV
47
m3/s
qV
1.5 2.0
10000 12000
3.0
800 42
15000
4.0
20000
5.0 6.0 7.0
1000 52
30000
8.0 9.0
ηesd (Nmax)
30
50
52 % 58
60
40
56
20
81
84
87
93
78
75
L
WA6;7
96 dB
90
P
S
3.0
2.0
6.0
4.0
5.0
kW
1.5
8.0
Direct driven centrifugal fans / RZA / Technical Data
Density of media 1.15 kg/m3.
Tolerance class 2 according to DIN 24166.
Measured in installation A according to ISO 5901 (unducted).
Technical Data
Determination of the Octave level
Inlet side
Discharge side Relative sound power level LWrel6 at octave band correction factors fc.
Relative sound power level LWrel7 at octave band correction factors fc.
Duty point
Duty point
Normal operation area
23
RZA 11-0560
RZA 11- V Hz kW kW A Hz 1/min °C kg
0560-6D 3 400 87 9.20 10.9 21.2 87 1660 40 154
RZA 11- V Hz kW A Hz 1/min 1/min °C kg
0560-6D-50 * 400 50 2.3 9.10 87 980 1660 40 154
0560-6D-60 * 460 60 3.7 9.20 87 1160 1660 40 154
914
59
409 512
1044
600
500
59
59
620
1071
431 247
130
805
14 756
785
751
712
6 x 112
462
12
715
35
421
400
ZKF 15-2727 ZKE 15-2727 ZSG 01-0560
LG 0 LG 90 LG 180 LG 270 RD 0 RD 90 RD 180 RD 270
RZA 11- ESH 22- MM420 3AC 400V 6SE6400- ZBD 01-
0560-6D ESH 22-0110-32 MM420 3AC 400V 11.0KW EMV B 6SE6400-3CC03-5CD3 ZBD 01-1010-A
RZA 11- ESH 22- MM420 3AC 400V 6SE6400- ZBD 01-
0560-6D-50 ESH 22-0110-32 – – ZBD 01-1010-A
0560-6D-60 ESH 22-0110-32 – – ZBD 01-1010-A
Direct driven centrifugal fans / RZA / Technical Data
Technical Data
Technical Data
Frequency Inverter Parameters
The following curves show the fans operating with frequency control:
The nominal frequency of the inverter is 87 Hz, i.e. the input frequency
400 V is increased to 87 Hz. The performance curves plot speed/frequency against volume and pressure, and the total efficiency
(ηinverter × ηmotor × ηimpeller) is expressed as a parabola.
The set up parameters for each inverter are provided in the accompanying literature.
Calculations formula
P
S = psF × qV / ηsS
L
Wokt7 = LWA6/7 + LWrel7
L
Wokt6 = LWA6/7 + LWrel6
3 = Stepless speed controllable via frequency converter
* = No speed control available
Dimensions in mm, Subject to change.
Accessories
Speed
control
Nominal
voltage
Nominal frequency
Nominal motor
power
Max. power
consumption
Max. output
current (FC)
Max. operating
frequency Max. fan speed
Max. media
temperature Weight
Speed
control
Nominal
voltage
Mains
frequency
Max. power
consumption
Nominal
motor
current
Max. operating
frequency
Nominal motor
speed Max. fan speed
Max. media
temperature Weight
Isolator
(metal casing)
Frequency Inverter Unit MM420
for 3~
Line Choke
for 3~ Anti Vibration Rubber Buffers
24
RZA 11-0225/-0560
Direct driven centrifugal fans / RZA / Ausschreibungstexte
Fan type RZA 11-
Casing position (anticlockwise) LG
Volume flow qV m3/h
Static pressure psF Pa
Air density at fan inlet r1 kg/m3
Air temperature t °C
Power consumption system Pe (PS) kW
Output current Inverter IA A
System efficiency ηesd %
Operating frequency f Hz
Max. operating frequency fmax Hz
Weight m kg
Specifications
High performance centrifugal fan RZA rotavent
double inlet, direct driven with an LowSlip external rotor motor.
Lap jointed scroll of galvanised sheet steel with discharge flange and bolt on
multipositioned feet.
High performance impeller with 11 backward curved blades (size 0225/-0280), with
12 hollow section true aerofoil blades (size 0315/-0560), inclined obliquely to the shaft
axis, welded in position and coated.
Throat plate inclined obliquely in opposition to blade inclination.
Inlet cones matched to the impeller to reduce entry losses.
Impeller fixed to the rotor of the LowSlip motor in IP54 type protection, compley
maintenance free, statically and dynamically balanced to DIN ISO 1940, vibration
isolated mounting, ready to connect with a metal connetction box.
The motor efficiency is optimised with the frequency inverters, speed control going
from 0 to 100 %. The capability of maintaining a constant operational speed.
Performance data in precision class 2 according to DIN 24166.
Ventilator Daten
Fittings / Accessories
Drain plug R1/2"
Inspection door
Corrosion protection S40
Volumeter IMV13

Discharge flange
Discahrge flexible connection
Inlet guards
Rubber AVM

Frequency inverter unit
3 phase line reactor
Difference pressure sensor
Universal control device
Isolator
25
Pos. 1
Pos. 3
Pos. 2
RZA 11- RZA 11-
0225/-0315 210 × 210 0355/-0560 310 × 310
RZA 11- ηe [%] "N" 2013 2015 Pe [kW] qV [m3/h] pF [Pa] N [1/min]
0225-4D 54.7 B 68.7 61 64 0.46 1748 523 2695 1.005
0250-4D 57.1 B 68.9 61 64 0.75 2361 655 2700 1.007
0280-4D 58.2 B 66.1 61 64 1.77 4061 914 2900 1.009
0315-4D 59.1 B 65.5 61 64 2.48 4884 1082 2750 1.011
0355-4D 62.7 B 67.4 61 64 3.60 6679 1218 2620 1.012
0400-4D 68.0 B 73.5 61 64 3.05 7683 973 2030 1.010
0450-4D 65.6 B 68.1 61 64 5.76 10753 1265 2040 1.013
0500-6D 66.0 B 68.0 61 64 6.49 12861 1200 1770 1.012
0560-6D 64.2 B 64.4 61 64 9.57 16748 1322 1660 1.013
Accessories
All options and accessories must be specified separay.
Please take the technical data and dimensions from the corresponding page of the
catalogue.
Drain Plug
If the fan is installed outside, or if conveying a medium containing humidty, condensation of water may accumulate inside the fan scroll.
For extraction of this water a condense water drain has to be installed at the lowest
point of the scroll. The drain will be provided with a thread R1/2" for connecting it to
a piping.
At order please indicate the required casing position.
Inspection Door
For the purposes of maintenance and cleaning there is an opening, which can be
securely closed by means of an access door, in the fan casing.
As it can only be opened with a tool, the access door complies with safety and
accident prevention regulations. Additional securing with locking bars can be supplied
on request.
The site and orientation of the inspection opening depends on the casing position.
The position should be specified when ordering according to the following diagram:
e.g. Access door, Pos. 2.
Dimensions in mm, subject to change.
Fittings / Accessories
Direct driven centrifugal fans / RZA / Accessories
Overall
efficiency
Measurement
category
Efficiency
category
achieved efficiency grade at
optimum energy
efficiency
required
efficiency
grade acc. to
ErP since
Speed
control (VSD)
Rated motor power at optimum
energy efficiency
Flow rate at optimum energy
efficiency
Pressure at optimum energy
efficiency
Speed at optimum energy
efficiency
"specific
ratio"
TOTAL
TOTAL
TOTAL
TOTAL
TOTAL
TOTAL
TOTAL
TOTAL
TOTAL
must be
installed
must be
installed
must be
installed
must be
installed
must be
installed
must be
installed
must be
installed
must be
installed
must be
installed
Technical Data according to ErP-REGULATION 327/2011/EU
Corrosion Protection Systems
Nicotra Gebhardt fans are treated with high quality corrosion protection as standard.
Under extreme operating conditions, however, additional corrosion protection is
advisable.
Corrosion protection - Class S40
Degreasing, ironphosphating
Powder coating
Layer thickness ≥40 μm, Colour RAL 7039
Wet lacquering
Layer thickness ≥40 μm (primer + lacquer finish), Colour RAL 7039
Technical Data
26
H
G
A E F
K
ZBD ZBD A E F G H K
01-0405A* 01-0405C* 20 25 16 M6 M6 6.5
03-0503A* 03-0503C* 25 15 11 M6 M6 6.5
01-0504A* 01-0504C* 25 20 11 M6 M6 6.5
03-0806A* 03-0806C* 40 30 21 M8 M8 9.5
03-1007A* 03-1007C* 50 34 26.5 M10 M10 10.5
03-1510A* 03-1510C* 75 50 39 M12 M12 12.5
02-2008A* 02-2008C* 100 40 44 M16 M16 16.5
Fittings / Accessories
Anti Vibration Rubber Buffers
Anti Vibration Mounts (AVM) are designed to prevent noise and vibrations being
transmitted through the base of the fan. AVMs should be mounted beneath the fan
base frame so the weight and spring deflections are evenly distributed.
They should not be mounted symmetrically around the centre of gravity of the system
when idle, because a counter force is induced into the system by the pressure
created by the working fan.
It is difficult for the manufacturer to establish the position of the AV mounts to suit all
types of application.
Vibration and noise insulation can also be improved by ensuring that the fan is connected to its external environment by a flexible coupling.
Rubber buffers
for both vibration and noise insulation at fan speeds above 1400 rpm or 850 rpm
Rubber buffers
for noise insulation only at fan speeds under 800 rpm or 1700 rpm
Dimensions in mm, subject to change.
* A = for U-profile; C = for CC-profile
Protection guards
The fans are designed for installation in equipment and as standard are not equipped
with protective guards.
They should not be put into operation before all protective devices are fitted
and connected!
Protective measures must be carried out as set out in DIN EN ISO 12100 "Safety of
machinery - Basic concepts, general principles for design".
If the application of the fan allows free access to the inlet and discharge apertures,
safety devices must be put in place on the fan in accordance with DIN EN ISO 13857!
Suitable safety guards are available as an optional extra.
Flanges and Flexible Connections
Made from galvanized or painted steel, to connect ducts and system components to
the fan outlet side.
Connecting piece with elastic intermediate section for the vibration or impact-noise
decoupled connection of the fan to the system or unit. Made out of two connecting
flanges with elastic intermediate section.
Temperature range / Application
Standard up to +80 °C
ATEX max. +60 °C
27
pin
pin
RZA 11- K [m2s/h] RZA 11- K [m2s/h] RZA 11- K [m2s/h]
0225 112 0315 180 0450 330
0250 125 0355 215 0500 410
0280 160 0400 255 0560 550
qV = K × — × 2 ?pDü
?
0
4000
8000
12000
16000
20000
24000
28000
0 1000 2000
pFI
Pa
0280
0315
0355
0400
0450
0500
m3/h
qV
500 1500
RZA 11-
32000
0560
0250
0225
Fittings / Accessories
Volumeter
With the flow measuring device it is possible to easilymeasure / monitor the flow rate
after the fan is installed. A pressure tapping at a predetermined position on the inlet
cone is provided whereby the differential pressure in relation to the static pressure is
measured in front ofthe inlet cone in a static atmosphere.
volume flow qV [m3/h]
calibration factor K [m2s/h]
density of media r [kg/m3]
pressure difference at cone DpDü [Pa]
In order to calculate the flow rate, a calibrating factor "K" is required. This factor is
determined by comparativemeasurement on a standard test rig.
Calibration factors
Standard-calibration faktor K
Where fans are built into a plenum, the pressure difference between the static pressure in the inlet side plenum and the pressure on the inlet cone is to bemeasured.
It must be ensured that the static pressureto be measured in front of the inlet cone
is not tampered by dynamic pressure fractions. It is often recommended to arrange
a ring of points on the wall facing the outlet side as illustrated in the sketch. When
using the K-factors specified below, a minimum clearance of 0.5×D between the inlet
cone of the fan and the side wall of the plenum must be maintained. Indentations that
obstruct the flow to the cone canlead to faults when measuring the flow rate. In the
event that the differential pressure is fed via a pressure sensor, the signal can also be
used for regulating purposes.
Measuring connector in inlet cone
Hose pipe to connecting piece in the side wall
Connecting piece (external diameter of 6mm) for the pressure
measurement
Volume flow determination
With the represented chart and a measured difference pressure at the nozzle can
streamed determined become the volumes in the indicated density. The chart can be
used also to the determination of the needed pressure area of a manometer. In addition the difference pressure is determined at the nozzle for the maximally appearing
volume current with the chart.
Electrical accessories (Frequency converter, Differential pressure sensor, Universal
control device, Isolator) see chapter "Accessories".
Electrical accessories
28
f
BP =—
N × z
60
Direct driven centrifugal fans / RZA / Accessories
Description
Performance data
The performance curves of the fans are determined at the plenum test rig according
to ISO 5801.
The curves show the pressure increase for a fan with free discharge as a function of
the flow rate. The diagramme scale is a double logarithmical net.
The throttle curves (system resistance parabolas) are then represented by straight
lines.
All fan curve and related data are based on a reference density of r1 = 1.15 kg/m3 for
the conveyed medium at fan intake.
For a medium density r1 different to this standard value the fan curves and the motor
load, as a consequence, will be changing.
The efficiencies and power consumption given in the performance curves include all
losses due to the motor and the frequency converter unit.
The data are established for a fan with free discharge i.e. without duct connection at
the presurre side, installation A.
Sound
Sound measurement and analysis are carried out in accordance with DIN 45635-38
”Sound measurement at machines; fans”.
The sound data of the fan curves are given as “A” weighted sound power levels LWA.
The “A” weighted sound power level are identical for fan intake (LWA7) as well as for
fan discharge (LWA6).
An approximation of the “A” weighted sound pressure levels LpA7/LpA6 at a distance
of 1 m at fan Inlet or discharge may be obtained by subtracting 7 dB from the relative
“A” weighted sound power levels.
If should be noted that site acoustics, duct design, reverberation, natural frequencies
etc. can all influence noise to a greater or lesser extent.
For more accurate calculations to determine noise protection measures, the sound
power level in each octave band is of more value.
The noise correction data, in function of the fan speed and flow rate, are to be found
with the corresponding table on the fan curve page.
Inlet: LWfc7 = LWA6/7 + LWrel7
Discharge: LWfc6 = LWA6/7 + LWrel6
In some cases the noise level - calculated by this way - may in some cases be higher
than expected at the blade passing frequency.
Blade passing frequency
f
BP = Blade passing frequency in Hz
N = Fan speed in 1/min
z = No of blades ... sizes 0225/-0280 = 11
sizes 0315/-0560 = 12
Media
This range of fans are specially designed for use into air handling units (AHU) and
ventilation systems.
The centrifugal fans are ideal for conveying clean air. The allowed air temperature
comes from -20 °C to +40 °C.
Safety
The fans are designed for installation in equipment and as standard are not equipped
with protective guards.
They should not be put into operation before all protective devices are fitted
and connected!
Protective measures must be carried out as set out in DIN EN ISO 12100 "Safety of
machinery - Basic concepts, general principles for design".
If the application of the fan allows free access to the inlet and discharge apertures,
safety devices must be put in place on the fan in accordance with DIN EN ISO 13857!
Suitable safety guards are available as an optional extra.
29
V
400
230
50 87 Hz
Direct driven centrifugal fans / RZA / Description
Motors
The specially developed integral motors are designated as having protection class
IP54 and heat class F.
They are optimised to a high rate of efficiency, with speed that can be adjusted
between 0 and 100 % via the frequency inverter.
The motors are fitted with an easily accessible metal clamping box. To prevent
overloading, PTC are inserted in the windings of the motors. In conjunction with
PTC release equipment or a frequency inverter with PTC connection, effective motor
protection is guaranteed.
The motors ex works are in star connection (Y). When operating with a
frequency inverter, the links must be placed in delta connection (g) (see
wiring diagram).
Electric connection
All fans are delivered ready for connection. Electrical connection takes place in
accordance with the enclosed operating instructions and observing the relevant
applicable local regulations and directives. Every fan is accompanied by a connection
circuit diagram. You can also find the relevant circuit diagram online at:
www.nicotra-gebhardt。。ｃｏｍ.
Frequency inverter operation
Frequency inverter operation with a nominal voltage of 400 V the edge frequency of
87 Hz must be set. The motor must then be delta (g) connected.
The inverter exit voltage is a square function of the frequency and the voltagefre-quency-curve has a corresponding shape. In the case of direct mains (400 V)
operation the motor should be star (Y) connected.
If frequency inverters are allocated by the customer, then it must be ensured that the
voltage gradient of the frequency inverter does not exceed the figure of 500 V/μs
and the maximum peak voltage at the motor terminals is kept to 1200 V. Depending
on the frequency inverter employed and the length of cable between the frequency
inver-ter and the motor, additional units (such as motor choke, active sinus filter, for
examp-le) may be needed to ensure that the limits named above are kept to.
Non-compliance may lead to damage to the motor!
Description
30
ηe(s)
ηe(s)d
2013 2015
A, C
0.125 ≤ P ≤ 10
58 61
10 < P ≤ 500
B, D
0.125 ≤ P ≤ 10
61 64
10 < P ≤ 500
ηm ηr
P
ed Pe Pu(s)
C
c
N
F = ηe - [4.56 · ln(Pe)] + 10.5
Highest system performance and best energy efficiency
The RZP rotavent serie
Economic, quiet and compact.
Through the combination of two pioneering technologies - the aerodynamics of the
rotavent impeller combined with energy efficient brushless integral motors, Nicotra
Gebhardt has developed a series of controllable direct drive centrifugal fans setting
new standards for economy and quiet operation.
Your benefits:
a greater motor efficiency due to the elimination of all slip losses and marked
reduction in copper losses
a compact range of fans from using built-in brushless DC motors (no belt drives)
maintenance and wear free drive (no V-belts)
short payback time due to high energy saving, especially with long operating
periods
higher comfort levels through particularly low noise fans and motors
setting unrelated to mains frequency – same operating point for 50/60 Hz
problrm free speed control from 0 up to 100 %
reduced motor heat from higher motor efficiency – reduced energy expenditure for
the cooling systems
System efficiency
The given System Efficiency is the efficiency of the whole system and includes the
individual efficiencies of the component Fan – Motor – Control electronics.
ErP conformity
Depending on the model of the fan, the efficiency grade "N" set in accordance with
the ErP Directive must be achieved from 2013 and 2015 respectively.
The efficiency grade designates a parameter in the calculation of the target energy
efficiency of a fan depending on the electric input power when operating at the
optimal energy efficiency point. The figure of parameter "N" corresponds to the target
energy efficiency with a power of 10 kW.
Efficiency grade "N" to ErP Directive
Centrifugal fans with backward curved blades with housing
Year
static
total
Measurement
category
Efficiency
category
Efficiency grade
"N"
Power range P
Control [kW]
electronics
VSD
Motor Impeller
ηtarget = 4.56 · ln(P) - 10.5 + N
ηtarget = 1.10 · ln(P) - 2.60 + N
ηtarget = 4.56 · ln(P) - 10.5 + N
ηtarget = 1.10 · ln(P) - 2.60 + N
Target energy efficiency
Calculation example for fan type: RZP 11-0315-EC-51
Measurement category / Efficiency category = B / TOTAL
VSD power range at optimum Ped = 4.12 kW (<10 kW)
Efficiency grade according to ErP Directive N2015 = 64
Calculation of the ErP energy efficiency ηtarget required 2015:
ηtarget = 4.56 · ln(4.12) - 10.5 + 64 ηtarget ≈ 60.0 %
Fan energy efficiency ηe:
System efficiency (total) by proSELECTA II ηe ≈ 65.6 %
Calculation of the Fan efficiency grade "NF":
N
F = 65.6 - [4.56 · ln(4.12)] + 10.5 NF = 69.6
Result: ηe 65.6 % > ηtarget 60.0 % resp. NF 69.6 > N2015 64
The energy efficiency of the fan surpasses the requirements of the ErP for 2015.
A technical data list according to ErP-REGULATION 327/2011/EU of all fans is
available at the end of this chapter "RZP".
Make use of our technical selection program
proSELECTA II. You receive all technical data for your
fan, easy–quick–reliable.
ηtarget = 4.56 · ln(Ped) - 10.5 + 64
31
RZP 11-0200/-0400
The compact pioneering technology
optimal Aerodynamics
Low turbulance velocity for both inlet and discharge due to the large
free cross section and minimal flow restraint of the impeller, an example of aerodynamics and performance of the rotavent.
Acoustics
Reduction of high frequency noise levels is just one of the advantages
of the rotavent, together with optimised brushless integral motors.
Minimal sound levels due to low blade passing frequencies from the
optimised impeller geometry of the rotavent. The impeller has obliquely
inclined blades with trailing edges, and the throat plate is inclined
opposingly.
high efficiency
A 10% up to 20% better system efficiency is achieved in comparison
to similar performance data for voltage controllable fan systems.
Your benefits:
negligible sensitivity to built in disturbances
minor pressure loss with free discharge operation
smaller, yet greater energy performance
Your benefits:
reduced size and costs of attenuation and silencers
Your benefits:
low running costs
high efficiency
Die Produktvorteile des RZP
Die Hochwertigen und pr?zisen Baulemente des rotavent, gefertigt mit modernsten Einrichtungen und h?chster Wiederholgenauigkeit, bilden die
Basis für ein Produkt welches auch h?chsten Ansprüchen genügt:
Version Description Figure
The motors
The vibration free motor suspension
The trouble-free speed
regulation
Lock formed scroll made of galvanised steel sheet, equipped with multi-position bolted
brackets and discharge flange.
High performance impeller with backward curved true aerofoil blades, welded and coated.
A drive unit involving an electronically commutated motor differs from the DC motors of old
through it‘s lack of collector and carbon brushes. These subject to wear components have
been replaced in electronically commutated motors with maintenance free electronics.
The anti-vibration system, specially developped for this application, ensure smooth running
of the unit whithout transmission of vibration to other parts of the installation or to the building.
from 0 to 100 % by an efficient Control electronics system.
Benefits:
high flexibility
easy adaptation to varying operational conditions
high efficiency at part load
32
RZP 11-0200-EC-11
EKE 07-0065-5E-IM
2000
1000
600
400
200
100
40
Pa
500
300
800
60
50
80
1500
150
1200
120
2000 3000 m3/h
psF
1000 1500 2500
3300
3700
2900
2600
2300
2100
1900
N
1/min
qV
0.15 0.2
400 500 600 800
m3/s
qV
0.3 0.4 0.5 0.6 0.7 0.8 0.9
ηesd (Nmax)
30
20
40
45 %
50
52
46
50
81
72
69
66
78
75 L
WA7
84
87 dB
P
1S
0.3
0.4
0.6
0.5
0.1
0.2
kW
0.15
r1 = 1.15 kg/m3
63 125 250 500 1000 2000 4000 8000 Hz
≤2342 1/min 0.70–1.4 qVopt -7 -10 +4 -4 -5 -10 -22 -27 dB
>2342 1/min 0.70–1.4 qVopt -12 -15 -8 -4 -4 -7 -15 -24 dB
63 125 250 500 1000 2000 4000 8000 Hz
≤2342 1/min 0.70–1.4 qVopt -8 -5 +2 -2 -5 -12 -21 -34 dB
>2342 1/min 0.70–1.4 qVopt -11 -11 -9 0 -7 -9 -14 -29 dB
Direct driven centrifugal fans / RZP / Technical data
Technical data
Determination of the Octave level
Inlet side
Discharge side Relative sound power level LWrel6 at octave band correction factors fc.
Relative sound power level LWrel7 at octave band correction factors fc.
Duty point
Speed Duty point
Speed
Density of media 1.15 kg/m3.
Measured in installation A according to ISO 5801 (unducted).
Normal operation area
33
RZP 11-0200-EC-11
EKE 07-0065-5E-IM
RZP 11- ZBD
0200-EC-11 ZBD 01-0506-A
358
22
168 190
393
200
160
22
22
228
409
167 89
130
309
8 286
306
286
254
2 x 90
7
256
25
157
ZKF 15-1616 ZKE 15-1616 ZSG 03-0200
LG 0 LG 90 LG 180 LG 270 RD 0 RD 90 RD 180 RD 270
RZP 11- EKE 07- V HZ kW A 1/min °C ~kg
0200-EC-11 0065-5E-IM 230 1~ 50/60 0.66 2.8 3700 IP54 F 40 15
Direct driven centrifugal fans / RZP / Technical data
Technical data
Control
electronics Voltage Phases
Mains
frequency
Max. power
consumption
Max. current
consumption
Nominal
motor speed
Motor
protection
class
Motor
thermal class
Max. media
temperature Weight
Dimensions in mm, subject to change.
Accessories
Anti Vibration Rubber Buffers
The system efficiency ηesd is the efficiency of the whole system, Fan–Motor–Control
electronics.
Attention! The performance curves relates to the fan in combination with the given
Control electronics.
34
RZP 11-0225-EC-12
EKE 07-0065-5E-IM
2000
1000
600
400
200
100
40
Pa
500
300
800
60
50
80
1500
150
1200
120
2000 3000 m3/h
psF
1000 1500 2500
3200
3500
2900
2600
2300
2000
1800
N
1/min
qV
0.15 0.2
500 600 800 4000
m3/s
qV
0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
ηesd (Nmax)
30
20
40
49 %
53
55
50
54
80
74
71
68
77
L
WA7
83
86 dB
P
1S
0.3
0.4
0.6
0.5
0.8
0.2
kW
0.15
r1 = 1.15 kg/m3
63 125 250 500 1000 2000 4000 8000 Hz
≤2342 1/min 0.70–1.4 qVopt -7 -9 0 -5 -3 -9 -19 -27 dB
>2342 1/min 0.70–1.4 qVopt -12 -13 -8 -6 -3 -8 -13 -23 dB
63 125 250 500 1000 2000 4000 8000 Hz
≤2342 1/min 0.70–1.4 qVopt -9 -6 -2 -1 -5 -10 -20 -32 dB
>2342 1/min 0.70–1.4 qVopt -12 -10 -7 -2 -4 -7 -13 -26 dB
Direct driven centrifugal fans / RZP / Technical data
Technical data
Determination of the Octave level
Inlet side
Discharge side Relative sound power level LWrel6 at octave band correction factors fc.
Relative sound power level LWrel7 at octave band correction factors fc.
Duty point
Speed Duty point
Speed
Density of media 1.15 kg/m3.
Measured in installation A according to ISO 5801 (unducted).
Normal operation area
Please note coloured area!
N do not use in this area
35
RZP 11-0225-EC-12
EKE 07-0065-5E-IM
RZP 11- ZBD
0225-EC-12 ZBD 01-0506-A
399
26
191 212
447
270
220
26
26
255
468
194 100
130
348
10.5 322
348
322
286
2 x 100
180
10
288
30
176
180
ZKF 15-1717 ZKE 15-1717 ZSG 03-0225
LG 0 LG 90 LG 180 LG 270 RD 0 RD 90 RD 180 RD 270
RZP 11- EKE 07- V HZ kW A 1/min °C ~kg
0225-EC-12 0065-5E-IM 230 1~ 50/60 0.85 3.7 3400 IP54 F 40 20
Direct driven centrifugal fans / RZP / Technical data
Technical data
Dimensions in mm, subject to change.
Accessories
Anti Vibration Rubber Buffers
The system efficiency ηesd is the efficiency of the whole system, Fan–Motor–Control
electronics.
Attention! The performance curves relates to the fan in combination with the given
Control electronics.
Control
electronics Voltage Phases
Mains
frequency
Max. power
consumption
Max. current
consumption
Nominal
motor speed
Motor
protection
class
Motor
thermal class
Max. media
temperature Weight
36
RZP 11-0250-EC-12
EKE 07-0065-5E-IM
2000
1000
600
400
200
100
40
Pa
500
300
800
60
50
80
1500
150
1200
120
2000 3000 m3/h
psF
1000 1500 2500
2900
3200
2600
2300
2000
1800
1600
N
1/min
qV
0.2
600 800 4000 5000
m3/s
qV
0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.5
ηesd (Nmax)
30
20
40
50 %
55
57
50
55
81
72
69
78
75 L
WA7
84
87 dB
P
1S
0.3
0.4
0.6
0.5
0.8
1.0
0.2
kW
0.15
r1 = 1.15 kg/m3
63 125 250 500 1000 2000 4000 8000 Hz
≤2342 1/min 0.70–1.4 qVopt -5 -6 0 -4 -3 -10 -18 -28 dB
>2342 1/min 0.70–1.4 qVopt -9 -12 -7 -5 -3 -8 -12 -22 dB
63 125 250 500 1000 2000 4000 8000 Hz
≤2342 1/min 0.70–1.4 qVopt -9 -8 -1 -1 -5 -11 -21 -31 dB
>2342 1/min 0.70–1.4 qVopt -12 -11 -8 -1 -5 -8 -16 -27 dB
Direct driven centrifugal fans / RZP / Technical data
Technical data
Determination of the Octave level
Inlet side
Discharge side Relative sound power level LWrel6 at octave band correction factors fc.
Relative sound power level LWrel7 at octave band correction factors fc.
Duty point
Speed Duty point
Speed
Density of media 1.15 kg/m3.
Measured in installation A according to ISO 5801 (unducted).
Normal operation area
Please note coloured area!
N do not use in this area
37
RZP 11-0250-EC-12
EKE 07-0065-5E-IM
RZP 11- ZBD
0250-EC-12 ZBD 01-0506-A
438
28
206 234
490
270
220
28
28
282
511
210 110
130
381
10.5 356
382
356
320
3 x 100
200
10
322
30
194
200
ZKF 15-1818 ZKE 15-1818 ZSG 03-0250
LG 0 LG 90 LG 180 LG 270 RD 0 RD 90 RD 180 RD 270
RZP 11- EKE 07- V HZ kW A 1/min °C ~kg
0250-EC-12 0065-5E-IM 230 1~ 50/60 1.1 4.5 3100 IP54 F 40 22
Direct driven centrifugal fans / RZP / Technical data
Technical data
Dimensions in mm, subject to change.
Accessories
Anti Vibration Rubber Buffers
The system efficiency ηesd is the efficiency of the whole system, Fan–Motor–Control
electronics.
Attention! The performance curves relates to the fan in combination with the given
Control electronics.
Control
electronics Voltage Phases
Mains
frequency
Max. power
consumption
Max. current
consumption
Nominal
motor speed
Motor
protection
class
Motor
thermal class
Max. media
temperature Weight
38
RZP 11-0280-EC-31
EKE 07-0065-5E-IM
2000
1000
600
400
200
100
40
Pa
500
300
800
60
50
80
1500
150
1200
120
2000 3000 m3/h
psF
1000 1500 2500
2800
3200
2400
2100
1800
1600
1400
N
1/min
qV
800 4000 5000 6000
m3/s
qV
0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.5
ηesd (Nmax)
30
20
40
48 %
52
54
50
53
81
72
69
87
78
75 L
WA7
84
90 dB
P
1S
0.3
0.4
0.6
0.8
1.0
0.5
0.2
kW
1.5
r1 = 1.15 kg/m3
63 125 250 500 1000 2000 4000 8000 Hz
≤2342 1/min 0.70–1.4 qVopt -4 -7 -1 -3 -3 -10 -17 -26 dB
>2342 1/min 0.70–1.4 qVopt -9 -10 -7 -5 -3 -8 -12 -22 dB
63 125 250 500 1000 2000 4000 8000 Hz
≤2342 1/min 0.70–1.4 qVopt -7 -7 -2 0 -5 -10 -20 -31 dB
>2342 1/min 0.70–1.4 qVopt -11 -9 -6 -1 -5 -8 -15 -26 dB
Direct driven centrifugal fans / RZP / Technical data
Technical data
Determination of the Octave level
Inlet side
Discharge side Relative sound power level LWrel6 at octave band correction factors fc.
Relative sound power level LWrel7 at octave band correction factors fc.
Duty point
Speed Duty point
Speed
Density of media 1.15 kg/m3.
Measured in installation A according to ISO 5801 (unducted).
Normal operation area
Please note coloured area!
N do not use in this area
39
RZP 11-0280-EC-31
EKE 07-0065-5E-IM
RZP 11- ZBD
0280-EC-31 ZBD 01-0506-A
484
30
226 263
548
270
220
30
30
315
570
236 123
130
421
10.5 395
421
395
358
3 x 100
225
10
361
30
216
225
ZKF 15-1919 ZKE 15-1919 ZSG 03-0280
LG 0 LG 90 LG 180 LG 270 RD 0 RD 90 RD 180 RD 270
RZP 11- EKE 07- V HZ kW A 1/min °C ~kg
0280-EC-31 0065-5E-IM 230 1~ 50/60 1.8 7.8 3100 IP54 F 40 32
Direct driven centrifugal fans / RZP / Technical data
Technical data
Dimensions in mm, subject to change.
Accessories
Anti Vibration Rubber Buffers
The system efficiency ηesd is the efficiency of the whole system, Fan–Motor–Control
electronics.
Attention! The performance curves relates to the fan in combination with the given
Control electronics.
Control
electronics Voltage Phases
Mains
frequency
Max. power
consumption
Max. current
consumption
Nominal
motor speed
Motor
protection
class
Motor
thermal class
Max. media
temperature Weight
40
RZP 11-0315-EC-31
EKE 07-0065-5E-IM
2000
1000
600
400
200
100
40
Pa
500
300
800
60
50
80
1500
150
1200
120
2000 3000 m3/h
psF
1000 1500 2500
2300
2600
2000
1700
1500
1300
N
1/min
qV
4000 5000 6000 8000
m3/s
qV
0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.5 2.0
ηesd (Nmax)
30
20
50
40
53 % 59
61
55
60
81
72
78
75 L
WA7
84
87 dB
P
1S
0.3
0.4
0.5
0.8
0.6
1.0
kW
1.5
r1 = 1.15 kg/m3
63 125 250 500 1000 2000 4000 8000 Hz
≤2342 1/min 0.70–1.4 qVopt -3 -7 0 -4 -2 -11 -20 -29 dB
>2342 1/min 0.70–1.4 qVopt -5 -10 -6 -3 -3 -9 -14 -23 dB
63 125 250 500 1000 2000 4000 8000 Hz
≤2342 1/min 0.70–1.4 qVopt -2 -3 +1 -2 -4 -11 -18 -28 dB
>2342 1/min 0.70–1.4 qVopt -5 -6 -4 -1 -5 -9 -14 -24 dB
Direct driven centrifugal fans / RZP / Technical data
Technical data
Determination of the Octave level
Inlet side
Discharge side Relative sound power level LWrel6 at octave band correction factors fc.
Relative sound power level LWrel7 at octave band correction factors fc.
Duty point
Speed Duty point
Speed
Density of media 1.15 kg/m3.
Measured in installation A according to ISO 5801 (unducted).
Normal operation area
Please note coloured area!
N do not use in this area
41
RZP 11-0315-EC-31
EKE 07-0065-5E-IM
RZP 11- ZBD
0315-EC-31 ZBD 01-0506-A
536
33
247 294
603
270
220
33
33
355
624
253 139
130
463
10.5 438
464
438
401
3 x 100
10
404
30
242
ZKF 15-2020 ZKE 15-2020 ZSG 03-0315
LG 0 LG 90 LG 180 LG 270 RD 0 RD 90 RD 180 RD 270
RZP 11- EKE 07- V HZ kW A 1/min °C ~kg
0315-EC-31 0065-5E-IM 230 1~ 50/60 1.8 7.8 2550 IP54 F 40 36
Direct driven centrifugal fans / RZP / Technical data
Technical data
Dimensions in mm, subject to change.
Accessories
Anti Vibration Rubber Buffers
The system efficiency ηesd is the efficiency of the whole system, Fan–Motor–Control
electronics.
Attention! The performance curves relates to the fan in combination with the given
Control electronics.
Control
electronics Voltage Phases
Mains
frequency
Max. power
consumption
Max. current
consumption
Nominal
motor speed
Motor
protection
class
Motor
thermal class
Max. media
temperature Weight
42
RZP 11-0315-EC-51
T06-745.2.340-300
2000
1000
600
400
200
100
40
Pa
500
300
800
60
50
80
1500
150
1200
120
2000 3000 m3/h
psF
1500 2500
3300
3700
2900
2500
2200
1900
1600
N
1/min
qV
1.5 2.0
4000
m3/s
qV
0.5 0.6 0.7 0.8 0.9 1.0 3.0
6000 8000 10000
3.0
4.0
0.6
0.5
1.0
2.0
kW
0.8
1.5
90
84
93
87
78
81
96 dB
30
20
40
53 %
59
61
55
50
60
ηesd (Nmax)
L
WA7
P
1S
r1 = 1.15 kg/m3
63 125 250 500 1000 2000 4000 8000 Hz
≤2342 1/min 0.70–1.4 qVopt -5 -5 +3 -3 -5 -11 -13 -18 dB
>2342 1/min 0.70–1.4 qVopt -6 -11 -9 -2 -4 -10 -14 -21 dB
63 125 250 500 1000 2000 4000 8000 Hz
≤2342 1/min 0.70–1.4 qVopt -4 -4 +2 -2 -5 -11 -14 -21 dB
>2342 1/min 0.70–1.4 qVopt -5 -8 -7 -1 -5 -9 -14 -22 dB
Direct driven centrifugal fans / RZP / Technical data
Technical data
Determination of the Octave level
Inlet side
Discharge side Relative sound power level LWrel6 at octave band correction factors fc.
Relative sound power level LWrel7 at octave band correction factors fc.
Duty point
Speed Duty point
Speed
Density of media 1.15 kg/m3.
Measured in installation A according to ISO 5801 (unducted).
Normal operation area
Please note coloured area!
N do not use in this area
43
RZP 11-0315-EC-51
T06-745.2.340-300
RZP 11- ZBD
0315-EC-51 ZBD 01-0506-A
536
33
247 294
603
270
220
33
33
355
624
253 139
130
463
10.5 438
464
438
401
3 x 100
295
10
404
30
242
ZKF 15-2020 ZKE 15-2020 ZSG 03-0315
LG 0 LG 90 LG 180 LG 270 RD 0 RD 90 RD 180 RD 270
RZP 11- T06- V HZ kW A 1/min °C ~kg
0315-EC-51 745.2.340-300 400 3~ 50/60 4.5 7.5 3560 IP54 B 40 43
Direct driven centrifugal fans / RZP / Technical data
Technical data
Dimensions in mm, subject to change.
Accessories
Anti Vibration Rubber Buffers
The system efficiency ηesd is the efficiency of the whole system, Fan–Motor–Control
electronics.
Attention! The performance curves relates to the fan in combination with the given
Control electronics.
Control
electronics Voltage Phases
Mains
frequency
Max. power
consumption
Max. current
consumption
Nominal
motor speed
Motor
protection
class
Motor
thermal class
Max. media
temperature Weight
44
RZP 11-0355-EC-52
T06-745.2.340-300
2000
1000
600
400
200
100
40
Pa
500
300
800
60
50
80
1500
150
1200
120
2000 3000 m3/h
psF
1500 2500
2500
2900
2200
1900
1600
1400
1200
N
1/min
qV
1.5 2.0
4000
m3/s
qV
0.5 0.6 0.7 0.8 0.9 1.0 3.0
6000 8000 10000
3.0
4.0
0.6
0.5
0.4
1.0
2.0
kW
0.8
1.5
90
84
93
87
78
75
72
81
96 dB
30
20
40
53 % 59
61
56
50
60
ηesd (Nmax)
L
WA7
P
1S
r1 = 1.15 kg/m3
63 125 250 500 1000 2000 4000 8000 Hz
≤2342 1/min 0.70–1.4 qVopt -3 -4 0 -4 -3 -11 -19 -22 dB
>2342 1/min 0.70–1.4 qVopt -7 -11 -7 -1 -5 -8 -15 -22 dB
63 125 250 500 1000 2000 4000 8000 Hz
≤2342 1/min 0.70–1.4 qVopt -4 -1 +1 -2 -5 -11 -17 -22 dB
>2342 1/min 0.70–1.4 qVopt -7 -7 -5 -1 -5 -8 -14 -24 dB
Direct driven centrifugal fans / RZP / Technical data
Technical data
Determination of the Octave level
Inlet side
Discharge side Relative sound power level LWrel6 at octave band correction factors fc.
Relative sound power level LWrel7 at octave band correction factors fc.
Duty point
Speed Duty point
Speed
Density of media 1.15 kg/m3.
Measured in installation A according to ISO 5801 (unducted).
Normal operation area
Please note coloured area!
N do not use in this area
45
RZP 11-0355-EC-52
T06-745.2.340-300
RZP 11- ZBD
0355-EC-52 ZBD 01-0606-A
598
36
273 329
668
270
220
36
36
297
689
275 157
130
513
10.5 487
513
487
450
4 x 100
295
10
453
30
271
ZKF 15-2121 ZKE 15-2121 ZSG 03-0355
LG 0 LG 90 LG 180 LG 270 RD 0 RD 90 RD 180 RD 270
RZP 11- T06- V HZ kW A 1/min °C ~kg
0355-EC-52 745.2.340-300 400 3~ 50/60 4.5 7.2 2870 IP54 B 40 54
Direct driven centrifugal fans / RZP / Technical data
Technical data
Dimensions in mm, subject to change.
Accessories
Anti Vibration Rubber Buffers
The system efficiency ηesd is the efficiency of the whole system, Fan–Motor–Control
electronics.
Attention! The performance curves relates to the fan in combination with the given
Control electronics.
Control
electronics Voltage Phases
Mains
frequency
Max. power
consumption
Max. current
consumption
Nominal
motor speed
Motor
protection
class
Motor
thermal class
Max. media
temperature Weight
46
RZP 11-0400-EC-52
T06-745.2.340-300
2000
1000
600
400
200
100
40
Pa
500
300
800
60
50
80
1500
150
1200
120
2000 3000 m3/h
psF
2500
2400
2600
2100
1800
1500
1300
1100
N
1/min
qV
1.5 2.0
4000
m3/s
qV
0.6 0.7 0.8 0.9 1.0 3.0
6000 8000 10000 15000
3.0
4.0
0.6
0.5
1.0
2.0
kW
0.8
1.5
90
84
93 dB
87
78
75
72
81
30
20
40
56 % 62
64
50
60
ηesd (Nmax)
L
WA7
P
1S
4.0
r1 = 1.15 kg/m3
63 125 250 500 1000 2000 4000 8000 Hz
≤2342 1/min 0.70–1.4 qVopt -3 -4 0 -2 -5 -9 -15 -19 dB
>2342 1/min 0.70–1.4 qVopt -5 -11 -5 -1 -5 -8 -12 -21 dB
63 125 250 500 1000 2000 4000 8000 Hz
≤2342 1/min 0.70–1.4 qVopt -5 -2 0 -2 -4 -10 -16 -21 dB
>2342 1/min 0.70–1.4 qVopt -8 -8 -6 -2 -4 -9 -14 -24 dB
Direct driven centrifugal fans / RZP / Technical data
Technical data
Inlet side
Discharge side
Determination of the Octave level
Relative sound power level LWrel6 at octave band correction factors fc.
Relative sound power level LWrel7 at octave band correction factors fc.
Duty point
Speed Duty point
Speed
Density of media 1.15 kg/m3.
Measured in installation A according to ISO 5801 (unducted).
Normal operation area
Please note coloured area!
N do not use in this area
47
RZP 11-0400-EC-52
T06-745.2.340-300
RZP 11- ZBD
0400-EC-52 ZBD 01-0606-A
667
40
302 369
751
385
320
40
40
445
773
310 179
130
596
14 546
567
541
504
4 x 100
345
10
507
30
304
ZKF 15-2222 ZKE 15-2222 ZSG 03-0400
LG 0 LG 90 LG 180 LG 270 RD 0 RD 90 RD 180 RD 270
RZP 11- T06- V HZ kW A 1/min °C ~kg
0400-EC-52 745.2.340-300 400 3~ 50/60 4.5 7.5 2520 IP54 B 40 64
Direct driven centrifugal fans / RZP / Technical data
Technical data
The system efficiency ηesd is the efficiency of the whole system, Fan–Motor–Control
electronics.
Attention! The performance curves relates to the fan in combination with the given
Control electronics.
Dimensions in mm, subject to change.
Accessories
Anti Vibration Rubber Buffers
Control
electronics Voltage Phases
Mains
frequency
Max. power
consumption
Max. current
consumption
Nominal
motor speed
Motor
protection
class
Motor
thermal class
Max. media
temperature Weight
48
RZP 11- ηe [%] "N" 2013 2015 Pe [kW] qV [m3/h] pF [Pa] N [1/min]
0200-EC-11 58.6 B 72.0 61 64 0.53 1565 720 3685 1.007
0225-EC-12 62.5 B 74.5 61 64 0.71 2105 760 3320 1.008
0250-EC-12 65.0 B 76.2 61 64 0.87 2665 766 2980 1.008
0280-EC-31 59.7 B 68.1 61 64 1.60 3660 943 2940 1.009
0315-EC-31 67.5 B 76.0 61 64 1.58 4430 865 2400 1.009
0315-EC-51 65.6 B 69.6 61 64 4.12 6058 1605 3300 1.016
0355-EC-52 66.5 B 70.7 61 64 3.96 7048 1345 2690 1.013
0400-EC-52 69.9 B 74.0 61 64 4.03 8459 1198 2235 1.012
Overall
efficiency
Measurement
category
Efficiency
category
achieved efficiency grade at
optimum energy
efficiency
required
efficiency
grade acc. to
ErP since
Speed
control (VSD)
Rated motor power at optimum
energy efficiency
Flow rate at optimum energy
efficiency
Pressure at optimum energy
efficiency
Speed at optimum energy
efficiency
"specific
ratio"
Technische Daten nach ErP-VERORDNUNG 327/2011/EU
TOTAL
TOTAL
TOTAL
TOTAL
TOTAL
TOTAL
TOTAL
TOTAL
integrated
integrated
integrated
integrated
integrated
integrated
integrated
integrated
Direct driven centrifugal fans / RZP / Technical data
Technical Data
49
RZP 11-0200/-0400
Direct driven centrifugal fans / RZP / Specifications
Specifications
High performance centrifugal fan RZP rotavent
double inlet, direct driven with an brushless external rotor motor.
Lap jointed scroll of galvanised sheet steel with discharge flange and bolt on multi
position feet.
High performance impeller with 12 hollow section true airfoil blades (Size
0315/-0400), with 11 backward curved laminar blades (Size 0200/-0280) inclined
obliquely to the shaft axis, welded in position and epoxy coated.
Throat plate inclined obliquely in opposition to blade inclination.
Inlet cones matched to the impeller to reduce entry losses.
Impeller fixed to the rotor of the brushless motor in IP54 type protection, compley
maintenance free, statically and dynamically balanced to DIN ISO 1940, vibration
isolated mounting, ready to connect with a metal connection box.
Optimised and approved for operation with an Electronic Commutation Unit.
Fan data
Fittings / Accessories
Drain plug R1/2"
Inspection door
Corrosion protection S40
Volumeter
Discharge flange
Discharge flexible connection
Inlet guards
Rubber AVM
Difference pressure sensor
Universal control device
Casing (additional for wall mounting of the communication unit)
Remote control unit
Fan type RZP 11-
Casing position (anticlockwise) LG
Volume flow qV m3/h
Static pressure psF Pa
Air density at fan inlet r1 kg/m3
Air temperature t °C
Max. power consumption Pe (P1S) kW
Max. current consumption Ie A
System efficiency ηesd %
Speed N 1/min
Weight m kg
50
220 105
155
195
6.2
244 70
1 130
X1
9 8 7 6 5 4 3 2 - + H3 H2 H1
PE W V U PE N L
X4 X3 X2
X5
qV
pF
EKE 07-0065-5E-IM
Direct driven centrifugal fans / RZP / Control electronics
Execution
Controller EKE 07 with single phase input and variable output voltage and frequency,
especially designed to operate forward curved fans with brushless DC motors. By
using modern power semiconductors a high efficiency at any speed is guaranteed.
Specification
suitable exclusively for operating Nicotra Gebhardt brushless DC motors
for single phase supply 230 V, 50/60 Hz – input power up to 1.8 kW
internal speed-, power- and motor current limitation can be adjusted according to
the connected fan type simply by dip switches
integrated active Power Factor Correction (power factor >95 %)
Modbus RTU serial interface
analogue interface 0...5 V/0…10 V
dry error contact (max. 24 V DC/250 mA)
protection class IP54 (protected against dust and splashing water)

Standards and guide lines
European Low Voltage Directive
The Controller EKE 07 complies to the requirements of the Low Voltage Directive
2006/95/EC. The unit has been manufactured according to the standard:
EN 60146-1-1 (Semiconductor converters - General requirements and line
commutated converters)
European EMC Directive
The Controller EKE 07 is supplied excluively in connection with products of the
company Nicotra Gebhardt. The unit is fully integrated in the corresponding products
and then complies to all requirements of the EMC directive, according to the EMC
product standard for electrical drives with variable speed EN 61800-3.
European Machinery Directive
The Controller EKE 07 does not impinge on the application field of the Machinery
Directive.
Interface
Performance
The exact limits depend on the fan type selected by dip switches.
Interface
analogue
Modbus RTU
Motor
Hall Sensor
Motor
Power
Mains
1~230VAC
50/60Hz
Description
Speed
Power Limit
Current limit
51
V Hz A kW A °C W
T06-745.2.340-300 400 3~ 50/60 6.7 4 6.7 -10...+40 160
mm2 mm2 mm2 A
T06-745.2.340-300 1.5 0.75 1 10
146
300
167
257
110
f
M1 M2
8 9 10 11 12 13 14 15 16 17 18
E +10 RF Reset PI 40mA +24V DD
L1 L2
L1 L2 L3
7
19 20 21 22 23 24
M3 M4 M5 M6
+15 LEFT DS
RIGHT
25 26 27 28 29 30
Re1 Re2
L3
PE
Brushless
DC-Motor
3~ / 400 V, 50/60 Hz
1 2 3
T06-745.2.340-300
Direct driven centrifugal fans / RZP / Control electronics
Anschlussplan
Description
Technical Data
Cable-cross section
Line
on site fuses
1 Start enable (START-STOP)
2 Reset
3 Direction (Left, Right)
Nominal
Nominal voltage frequency Nominal current Nominal power Output current
Ambient
temperature Power losses
Min. cable-cross section
for motor leads
recommended cable-cross section
for hall sensor leads
Min. cable-cross section
for mains leads
recommended fusing in panel
for mains leads
The Nicotra Gebhardt control electronic has a painted metal housing and is suitable
for mounting in control units. The Unit must only be mounted and operated in a
dry, dust free area. Minimum spacings are to be maintained when mounting (see
Operating Instructions). The permitted ambient temperature amounts to +40 °C.
EMI filter and line choke are integrated in the controller in accordance with the
requirements of the EMC Guideline 89/336/EWG.
Function
Speed control through an external 0...10 V input signal or through an incorporated
potentiometer
On/Off switching and an adjustable speed reduction facility through potential free
contacts
Speed reporting through an analogue 0...10 V output or a digital output
Fault and operating indication through built in LEDs and a reporting relay
Extensive monitoring and protection functions for motor current, phase failure and
overcurrent
52
Pos. 1
Pos. 3
Pos. 2
RZP 11- RZP 11-
0200/-0315 210 × 210 0355/-0400 310 × 310
Accessories
All options and accessories must be specified separay.
Please take the technical data and dimensions from the corresponding page of the
catalogue.
Drain Plug
If the fan is installed outside, or if conveying a medium containing humidty, condensation of water may accumulate inside the fan scroll.
For extraction of this water a condense water drain has to be installed at the lowest
point of the scroll. The drain will be provided with a thread R1/2" for connecting it to
a piping.
At order please indicate the required casing position.
Inspection Door
For the purposes of maintenance and cleaning there is an opening, which can be
securely closed by means of an access door, in the fan casing.
As it can only be opened with a tool, the access door complies with safety and
accident prevention regulations. Additional securing with locking bars can be supplied
on request.
The site and orientation of the inspection opening depends on the casing position.
The position should be specified when ordering according to the following diagram:
e.g. Access door, Pos. 2.
Corrosion Protection Systems
Nicotra Gebhardt fans are treated with high quality corrosion protection as standard.
Under extreme operating conditions, however, additional corrosion protection is
advisable.
Corrosion protection - Class S40
Degreasing, ironphosphating
Powder coating - Layer thickness ≥40 μm, Colour RAL 7039
Wet lacquering - Layer thickness ≥40 μm (primer + lacquer finish), Colour
RAL 7039
Protection guards
The fans are designed for installation in equipment and as standard are not equipped
with protective guards.
They should not be put into operation before all protective devices are fitted
and connected!
Protective measures must be carried out as set out in DIN EN ISO 12100 "Safety of
machinery - Basic concepts, general principles for design".
If the application of the fan allows free access to the inlet and discharge apertures,
safety devices must be put in place on the fan in accordance with DIN EN ISO 13857!
Suitable safety guards are available as an optional extra.
Flanges and Flexible Connections
Made from galvanized or painted steel, to connect ducts and system components to
the fan outlet side.
Connecting piece with elastic intermediate section for the vibration or impact-noise
decoupled connection of the fan to the system or unit. Made out of two connecting
flanges with elastic intermediate section.
Temperature range / Application
Standard up to +80 °C
ATEX max. +60 °C
Dimensions in mm, subject to change.
Fittings / Accessories
Direct driven centrifugal fans / RZP / Accessories
53
H
G
A E F
pin K
qV = K × — × 2 ?pDü
?
pin
ZBD ZBD A E F G H K
01-0405A* 01-0405C* 20 25 16 M6 M6 6.5
03-0503A* 03-0503C* 25 15 11 M6 M6 6.5
01-0504A* 01-0504C* 25 20 11 M6 M6 6.5
03-0806A* 03-0806C* 40 30 21 M8 M8 9.5
03-1007A* 03-1007C* 50 34 26.5 M10 M10 10.5
03-1510A* 03-1510C* 75 50 39 M12 M12 12.5
02-2008A* 02-2008C* 100 40 44 M16 M16 16.5
RZP 11- K [m2s/h] RZP 11- K [m2s/h]
0200-EC-11 100 0315-EC-31 190
0225-EC-12 115 0315-EC-51 190
0250-EC-12 140 0355-EC-52 235
0280-EC-31 165 0400-EC-52 290
Fittings / Accessories
Direct driven centrifugal fans / RZP / Accessories
Anti Vibration Rubber Buffers
Anti Vibration Mounts (AVM) are designed to prevent noise and vibrations being
transmitted through the base of the fan. AVMs should be mounted beneath the fan
base frame so the weight and spring deflections are evenly distributed.
They should not be mounted symmetrically around the centre of gravity of the system
when idle, because a counter force is induced into the system by the pressure
created by the working fan.
It is difficult for the manufacturer to establish the position of the AV mounts to suit all
types of application.
Vibration and noise insulation can also be improved by ensuring that the fan is connected to its external environment by a flexible coupling.
Rubber buffers
for both vibration and noise insulation at fan speeds above 1400 rpm or 850 rpm
Rubber buffers
for noise insulation only at fan speeds under 800 rpm or 1700 rpm
Dimensions in mm, subject to change.
Volumeter
With the flow measuring device it is possible to easilymeasure / monitor the flow rate
after the fan is installed. A pressure tapping at a predetermined position on the inlet
cone is provided whereby the differential pressure in relation to the static pressure is
measured in front ofthe inlet cone in a static atmosphere.
volume flow qV [m3/h]
calibration factor K [m2s/h]
density of media r [kg/m3]
pressure difference at cone DpDü [Pa]
In order to calculate the flow rate, a calibrating factor "K" is required. This factor is
determined by comparativemeasurement on a standard test rig.
* A = for U-profile; C = for CC-profile
Calibration factors
Standard-calibration faktor K
Where fans are built into a plenum, the pressure difference between the static
pressure in the inlet side plenum and the pressure on the inlet cone is to bemeasured.
It must be ensured that the static pressureto be measured in front of the inlet cone
is not tampered by dynamic pressure fractions. It is often recommended to arrange
a ring of points on the wall facing the outlet side as illustrated in the sketch. When
using the K-factors specified below, a minimum clearance of 0.5×D between the inlet
cone of the fan and the side wall of the plenum must be maintained. Indentations that
obstruct the flow to the cone canlead to faults when measuring the flow rate. In the
event that the differential pressure is fed via a pressure sensor, the signal can also be
used for regulating purposes.
Measuring connector in inlet cone
Hose pipe to connecting piece in the side wall
Connecting piece (external diameter of 6mm) for the pressure
measurement
54
L
WA6 = LWA7 + 1 dB
f
BP =—
N × z
60
Direct driven centrifugal fans / RZP / Description
Description
Safety
The fans are designed for installation in equipment and as standard are not equipped
with protective guards.
They should not be put into operation before all protective devices are fitted
and connected!
Protective measures must be carried out as set out in DIN EN ISO 12100 "Safety of
machinery - Basic concepts, general principles for design".
If the application of the fan allows free access to the inlet and discharge apertures,
safety devices must be put in place on the fan in accordance with DIN EN ISO 13857!
Suitable safety guards are available as an optional extra.
Performance data
The performance curves of the fans are determined at the plenum test rig according
to ISO 5801.
The performance curves show the unrestricted outlet pressure increase psF of the fan
as a function of the volume flow.
For ease of use, equipment parabolas are included in the diagrams. It should be
noted that the efficiency varies with the controller position on the curve. For the
con-troller positions 100 % the efficiency is shown on the per-formance curve at the
points.
All the given characteristics are based on a density r1 for the conveyed medium at
the fan entry of 1.15 kg/m3.
Pressure increase and drive output vary proportionally with the density r1.
The free discharge pressure increase psF is the usable static pressure increase of the
fan.
The given data is applicable to free discharge installation "A" only.
The performance curves given in the catalogue only apply for the application of the
Commutation Unit and the given nominal voltage.
The efficiencies and power consumption given In the performance curves include all
losses due to the built-in motor and the electronic commutation unit.
Sound
Sound measurement and analysis are carried out in accordance with DIN 45635-38
"Sound measurement at machines; fans".
The sound data of the fan curves are given as "A" weighted sound power levels LWA7.
The "A" weighted sound power level are identical for fan intake LWA7.
An approximation of the "A" weighted sound pressure levels LpA7/LpA6 at a distance
of 1 m at fan Inlet or discharge may be obtained by subtracting 7 dB from the relative
"A" weighted sound power levels.
If should be noted that site acoustics, duct design, reverberation, natural frequencies
etc. can all influence noise to a greater or lesser extent.
For more accurate calculations to determine noise protection measures, the sound
power level in each octave band is of more value.
The noise correction data, in function of the fan speed and flow rate, are to be found
with the corresponding table on the fan curve page.
Inlet: LWfc7 = LWA7 + LWrel7
Discharge: LWfc6 = LWA6 + LWrel6
In some cases the noise level - calculated by this way - may in some cases be higher
than expected at the blade passing frequency.
Blade passing frequency
f
BP = Blade passing frequency in Hz
N = Fan speed in 1/min
z = No of blades ... sizes 0200/-0280 = 11
sizes 0315/-0400 = 12
55
Direct driven centrifugal fans / RZP / Description
Description
Media
This range of fans are specially designed for use into air handling units (AHU) and
ventilation systems.
The centrifugal fans are ideal for conveying clean air. The allowed air temperature
comes from -20 °C to +40 °C.
Motors
The motors do not have direct temperature monitoring through termistors or probes.
Motor protection is achieved through the current monitoring of the electronic
commutation unit.
Attention!
In no case may the fan be driven with a larger output electronic commutation
unit than the one indicated in the catalogue or be used in a conveyor medium
temperature greater than the maximum permitted one.
Electric connection
The fans will be delivered ready for installation and are fitted with a connection cable
or an easily accessible motor connection box.
The electrical installation is to be carried out in accordance with the applicable
conditions and in observance of local regulations.
Each motor is accompanied with a terminal connection diagram which clearly shows
the correct connections.
All motor and position sensor leads must be screened!
Recommended cable e.g. Fabrikat Oilflex 100-CY from the Lapp Co.
Basically the operating instructions of the Electronic Commutation Unit are to be
observed.
56
ηe(s)
ηe(s)d
ηm ηr
P
ed Pe Pu(s)
C
c
2013 2015
A, C
0.125 ≤ P ≤ 10
58 61
10 < P ≤ 500
B, D
0.125 ≤ P ≤ 10
61 64
10 < P ≤ 500
The RZM rotavent serie
Economic, quiet and compact:
Through the combination of two high technologies - the aerodynamics of the rotavent
impeller combined with energy efficient IEC motors - Nicotra Gebhardt has developed
a series of coupled direct driven centrifugal fans setting new standards for economy
and quiet operation.
Your benefits:
powerful fan range direct driven with coupling
maintenance and wear free drive (no V-belts)
short payback time due to high energy saving, especially with long operating
periods
higher comfort levels through particularly low noise fans and motors
problem free speed control from with frequency inverter
Top quality for performance and a long service life!
Alongside an inligent construction, aspects such as the quality of materials and
workmanship play a crucial role in ensuring a long life cycle.
Apart from that, the tried and tested quality of our successful, long-standing RZR
series remains the same. And that means robust impeller constructions, noncorrosive impeller shafts and quality bearings – for a long life with minimum noise.
Highest system performance and best energy efficiency
A technical data list according to ErP-REGULATION 327/2011/EU of all fans is
available at the end of this chapter "RZM".
Frequency
inverter
Motor Impeller
Make use of our technical selection program
proSELECTA II. You receive all technical data for your
fan, easy–quick–reliable.
System efficiency
The given System Efficiency is the efficiency of the whole system and includes the
individual efficiencies of the component Fan – Motor – Frequency inverter.
ErP conformity
Depending on the model of the fan, the efficiency grade "N" set in accordance with
the ErP Directive must be achieved from 2013 and 2015 respectively.
The efficiency grade designates a parameter in the calculation of the target energy
efficiency of a fan depending on the electric input power when operating at the
optimal energy efficiency point. The figure of parameter "N" corresponds to the target
energy efficiency with a power of 10 kW.
Efficiency grade "N" to ErP Directive
Centrifugal fans with backward curved blades with housing
Year
Measurement
category
Efficiency
category
Efficiency grade
"N"
Power range P
[kW]
ηtarget = 4.56 · ln(P) - 10.5 + N
ηtarget = 1.10 · ln(P) - 2.60 + N
ηtarget = 4.56 · ln(P) - 10.5 + N
ηtarget = 1.10 · ln(P) - 2.60 + N
Target energy efficiency
static
total
57
RZM 15-0400/-1000
RZM 18-0630/-1000
RZM 13-1120/-1400
The powerful high technologie!
Optimal aerodynamics
Low turbulance velocity for both inlet and discharge due to the large
free cross section and minimal flow restraint of the impeller, an example of aerodynamics and performance of the rotavent.
Acoustics
Reduction of high frequency noise levels is just one of the advantages
of the rotavent, together with optimised AC-motors.
Minimal sound levels due to low blade passing frequencies from the
optimised impeller geometry of the rotavent. The impeller has obliquely
inclined blades with trailing edges, and the throat plate is inclined
opposingly.
High efficiencies
Nicotra Gebhardt fans of the RZM rotavent range are operating at high
efficiency in wide area of the fan curve.
Wear-free drive by direct coupling
The use of direct coupling drive avoids wear of the drive as this is the
case with belt driven fans.
Your benefits:
negligible sensitivity to built in disturbances
minor pressure loss with free discharge operation
smaller, yet greater energy performance
Your benefits:
reduced size and costs of attenuation and silencers
Your benefits:
low running costs
high efficiency
Your benefits:
no subsequent filter necessary
less dust in the system
The benefits of rotavent RZM
The high value and precisely manufactured components of rotavent, manufactured with most modern machinery for demanding tolerance standards, are the basis for a product range satisfying highest quality requirements.
Lap jointed scroll of galvanised steel sheet with discharge flange and heavy duty reinforced
side frames.
Heavy duty bearing execution with split-type plummer block, mounted on robust pedestal.
High performance impeller with hollow section true aerofoil blades, welded and epoxy
coated.
Fan with motor and elastic coupling mounted on a robust base frame.
Lap jointed scroll of galvanised steel sheet with discharge flange and heavy duty reinforced
side frames.
Medium-heavy duty bearing execution with cast iron housing/strut assemblies.
High performance impeller with hollow section true aerofoil blades, welded and epoxy
coated.
Fan with motor and elastic coupling mounted on a robust base frame.
Heavy duty casing of sheet steel with stiffening members, step welded and coated, with
discharge flange.
Casing is split on one axis (Size 1120), split on two axis (Sizes 1250/-1400).
Heavy duty bearing execution with split-type plummer blocks, mounted on robust pedestal.
High performance impeller with hollow section true aerofoil blades, welded and epoxy
coated.
Fan with motor and elastic coupling mounted on a robust base frame.
Version Description Figure
58
RZM 15-0400
D
r 406 mm
z 12
J 0.33 kgm2
m 10.5 kg
r1 1.2 kg/m3
A – 1.4
1.0
1.0
1.05
1.1
1.2
A
f
pd
1.3
72
75
78
81
84
87
90
93
96
99
102
L
WA 4;7
108 dB
105
66%
75
80
70
60
50
40
25
81
80
ηa (Nmax)
5.0
4.0
3.0
2.5
2.0
1.5
1.0
0.8
0.7
0.6
0.5
0.4
20
8.0
kW
P
a
6.0
7.0
10
15
100
150
200
300
400
500
600
800
1000
1500
2000
2500
3000
3500
4000
Pa
40
60
80
pF
m3/h
m3/s
m/s
Pa
qV
v
2
pd2
N u fη
1/min m/s
2000 3000 4000 5000 6000 8000
0.5 0.6 0.7 0.8 0.9 1.0 1.5 2.0
3 4 5 6 7 8 9 10 20 30
3 4 5 6 8 10 20 30 40 50 60 80 100 200 300 400 600 800
3760
3200
2800
2400
2100
1800
1600
1400
1200
1100
80
70
60
50
45
40
35
30
25
1.0
0.99
10000
2
2
3.0
15000 20000
4.0 5.0 6.0 7.0
30000
8.0 9.0
0.98
0.97
0.96
0.95
15
63 125 250 500 1000 2000 4000 8000 Hz
0 2 0 -3 -6 -9 -12 -19 dB
-2 1 -2 -3 -6 -8 -14 -20 dB
-3 0 -1 -3 -6 -8 -14 -21 dB
-5 -3 -3 -3 -6 -7 -13 -21 dB
63 125 250 500 1000 2000 4000 8000 Hz
-2 -1 -3 -1 -6 -10 -15 -21 dB
-7 -4 -5 -1 -6 -9 -14 -21 dB
-10 -7 -8 -1 -5 -8 -13 -21 dB
-10 -8 -8 -2 -6 -8 -11 -18 dB
63 125 250 500 1000 2000 4000 8000 Hz
13 7 4 -3 -8 -14 -17 -25 dB
10 5 3 -2 -7 -13 -17 -25 dB
7 2 2 -2 -6 -12 -18 -27 dB
5 1 1 -2 -6 -10 -17 -27 dB
63 125 250 500 1000 2000 4000 8000 Hz
11 4 2 0 -7 -12 -17 -24 dB
7 1 -2 -3 -6 -10 -15 -23 dB
3 -2 -4 -3 -5 -9 -14 -23 dB
2 -3 -5 -3 -5 -9 -12 -21 dB
≤1882 1/min
≤0.8 qVopt
>0.8-1.2 qVopt
>1.2-1.6 qVopt
>1.6 qVopt
>1882 1/min
≤0.8 qVopt
>0.8-1.2 qVopt
>1.2-1.6 qVopt
>1.6 qVopt
Direct driven centrifugal fans / RZM / Technical Data
Technical Data
Impeller Data
Impeller diameter
Number of blades
Moment of Inertia
Please note coloured area!
N all types suitable
N do not use in this area
Measured in installation B
according to ISO 5801:
Impeller Data
Impeller weight
Density of media
Determination of the Octave level
Normal
operation area
Relative sound power level for discharge side LWrel4 at octave band
correction factors f
c.
Relative sound power level for inlet side LWrel7 at octave band
correction factors f
c.
Duty point
Duty point
Speed
Speed
59
RZM 15-0400
RZM 15- kW V Hz A 1/min 1/min Hz kg
0400-4W-16 2.2 4 100L 230/400 3~ 50 g/Y 8.1/4.65 1455 1760 60 164
0400-4D-17 3.0 4 100Lb 400 3~ 50 g 6.3 1425 1950 68 192
0400-4D-19 4.0 4 112M 400 3~ 50 g 8.2 1435 2160 75 192
0400-4D-21 5.5 4 132Sa 400 3~ 50 g 11.4 1450 2390 82 264
0400-4D-23 7.5 4 132Ma 400 3~ 50 g 15.4 1450 2650 91 264
0400-2D-26 11.0 2 160Ma 400 3~ 50 g 21.5 2920 2970 51 151
0400-2D-27 15.0 2 160Mb 400 3~ 50 g 29.0 2930 3300 56 151
RD 90 RD 270
LG 0 LG 90 LG 270
RD 0
RD 0 RD 90 RD 270
Motor
100
112
132
160
G
1203
1210
1299
1398
RZM 15-0400
?10
 4×100
 504
 541
 567
390
302 302
263 263 263
G
560
526
30 130
667 667
65 310
65
65
773
 507
671
369
286
775
775
179
179
179
463
767
ZSG 01-0400
ZKE 15-2222
ZKF 15-2222
ZSG 15-2222
ZSR 51-0400 WBS 01-0400
RZM 15-
0400-4W-16 MM420 3AC 400V 2.20KW EMV B 6SE6400-3CC01-0BD3 - -
0400-4D-17 MM420 3AC 400V 3.00KW EMV B 6SE6400-3CC01-0BD3 - -
0400-4D-19 MM420 3AC 400V 4.00KW EMV B 6SE6400-3CC01-4BD3 - -
0400-4D-21 MM420 3AC 400V 5.50KW EMV B 6SE6400-3CC02-2CD3 - -
0400-4D-23 MM420 3AC 400V 7.50KW EMV B 6SE6400-3CC02-2CD3 - -
0400-2D-26 MM420 3AC 400V 11.0KW EMV B 6SE6400-3CC02-5CD3 - -
0400-2D-27 - 6SE6400-3CC03-5CD3 6SE6430-2AD31-5CA0 6SE6400-0BE00-0AA0
Nominal motor
power Poles Motor size
Motor
voltage Phases
Nominal
frequency Connection
Nominal motor current
Nominal motor
speed Max. fan speed
Max. operating
frequency Weight
Direct driven centrifugal fans / RZM / Technical Data
Technical Data
Dimensions in mm, subject to change.
Frequency Inverter Unit MM420
for 3~
Line Choke
for 3~
Frequency inverter
6SE6430-
Control Panel for frequency inverter
6SE6420- and 6SE6430-
Accessories
Motor code:
- W = Asynchronous motor (efficiency class IE2)
- D = Asynchronous motor
60
RZM 15-0450
D
r 455 mm
z 12
J 0.6 kgm2
m 15.8 kg
r1 1.2 kg/m3
A – 1.4
1.0
1.0
1.05
1.1
1.2
A
f
pd
1.3
72
75
78
81
84
87
90
93
96
99
102
LW
A 4;7
108 dB
105
66%
75
80
70
60
50
40
25
81
80
ηa (Nmax)
5.0
4.0
3.0
2.5
2.0
1.5
1.0
0.8
0.7
0.6
0.5
20 25
8.0
kW
P
a
6.0
7.0
10
15
100
150
200
300
400
500
600
800
1000
1500
2000
2500
3000
3500
4000
Pa
40
60
80
m3/h
m3/s
m/s
Pa
qV
v
2
pd2
N u
1/min m/s
3000 4000 5000 6000 8000
0.6 0.7 0.8 0.9 1.0 1.5 2.0
3 4 5 6 7 8 9 10 20 30
3 4 5 6 8 10 20 30 40 50 60 80 100 200 300 400 600 800
3360
2800
2400
2100
1800
1600
1400
1200
1000
80
70
60
50
45
40
35
30
25
1.0
0.99
10000
2
2
3.0
15000 20000
4.0 5.0 6.0 7.0
30000
8.0 9.0
0.98
0.97
40000
10
15
pF
63 125 250 500 1000 2000 4000 8000 Hz
0 2 0 -3 -6 -9 -12 -19 dB
-2 1 -2 -3 -6 -8 -14 -20 dB
-3 0 -1 -3 -6 -8 -14 -21 dB
-5 -3 -3 -3 -6 -7 -13 -21 dB
63 125 250 500 1000 2000 4000 8000 Hz
-2 -1 -3 -1 -6 -10 -15 -21 dB
-7 -4 -5 -1 -6 -9 -14 -21 dB
-10 -7 -8 -1 -5 -8 -13 -21 dB
-10 -8 -8 -2 -6 -8 -11 -18 dB
63 125 250 500 1000 2000 4000 8000 Hz
13 7 4 -3 -8 -14 -17 -25 dB
10 5 3 -2 -7 -13 -17 -25 dB
7 2 2 -2 -6 -12 -18 -27 dB
5 1 1 -2 -6 -10 -17 -27 dB
63 125 250 500 1000 2000 4000 8000 Hz
11 4 2 0 -7 -12 -17 -24 dB
7 1 -2 -3 -6 -10 -15 -23 dB
3 -2 -4 -3 -5 -9 -14 -23 dB
2 -3 -5 -3 -5 -9 -12 -21 dB
≤1679 1/min
≤0.8 qVopt
>0.8-1.2 qVopt
>1.2-1.6 qVopt
>1.6 qVopt
>1679 1/min
≤0.8 qVopt
>0.8-1.2 qVopt
>1.2-1.6 qVopt
>1.6 qVopt
Direct driven centrifugal fans / RZM / Technical Data
Technical Data
Impeller Data
Impeller diameter
Number of blades
Moment of Inertia
Please note coloured area!
N all types suitable
Measured in installation B
according to ISO 5801:
Impeller Data
Impeller weight
Density of media
Determination of the Octave level
Normal
operation area
Relative sound power level for discharge side LWrel4 at octave band
correction factors f
c.
Relative sound power level for inlet side LWrel7 at octave band
correction factors f
c.
Duty point
Duty point
Speed
Speed
61